- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you forgot the password to unlock Device-Lock, follow the
steps below to activate Master Clear.
1. Switch off the power and remove the SIM card.
2. Switch on the power. Press ‘*25327#’ on the Home screen
and then press OK.
^that is straight from the pantech duo manual. good luck!
Most likely you have put a pin code on this phone. This code is stored in the SIM card and when you power up the phone it asks for a pin code before you can operate the phone. In some cases when you enter the wrong pin code too many times the SIM card will lock up. You need to contact the phone service provider for assistance to unlock/remove the pin code.
If you can enter *2767*3855# without the simcard then that's the way to unlock and reset it but it will delete all information stored on the phone. Unfortunately, if you won't be able to enter the strings of command completely, then there's no other way to unlock it but to send the phone for repair to Samsung service center.
If you forgot your password you can try guessing until 3-5 tries and if t locks there is a pin that can open it that came with your phone company, better yet call your phone manufacturer so they can walk you through the steps and give you codes as well
I think all you can do it reset the device to disable the password completely. If you enter the password ten times incorrectly it will ask if you want to do a complete reset.
THIS WILL DELETE ALL YOUR PERSONAL DATA.
If you can, back up your device using the Blackberry Desktop Manager application before doing a reset. Then you can re-load all your personal data after the reset, instead of having to type it all in again.
hi Try with all the code to see whether you can get one to unlock your phone. If all still cannot help then you can only contact Samsung Support for help. I hope these information below at least can give you some hints:
Note try codes which help direct unlock for either SIM Lock or Security Lock first before try other codes
*2767*3855# - FULL E2P RESET *2767*2878# - CUSTOM E2P RESET #*7337# - UNLOCK *2767*688# - UNLOCK *#0523# - CONTRAST *#9998*523# - CONTRAST *#8999*8378# - Service Menu (X100)
First with different carrier SIM in phone at WRONG CARD screen ENTER on the keypad *2767*3855# (wait 10-15 seconds) phone will reboot(restart) When phone completes reboot ENTER *7465625*638*00000000*00000000# NEXT ENTER #7465625*638*00000000# AND THEN *#7465625# to check the locks....all locks are inactive...these are all the locks... network lock - inactive subset lock - inactive sp lock - inactive cp lock - inactive sim lock - inactive activa lock - inactive phone lock - inactive auto network - inactive auto subset lock - inactive auto sp lock - inactive auto cp lock - inactive