Question about NetGear WGR614 Wireless Router

1 Answer

I am trying to setup up my wireless router so it will connect with a laptop i already have two desktops connecting to the internet but the laptop will not connect

Posted by on

  • Jaye Ellen Burke
    Jaye Ellen Burke May 11, 2010

    Have you set up the wireless security on your router?

  • jgonz720 May 11, 2010

    Check your router settings. Did you set it to limit number of users? Is the password correct? Is the computer set to automatically detect settings and automatically get IP addresss from router, or are you using static addresses?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 781 Answers

Things to check:

1. is your wireless network adapter on your laptop enabled? check under network connections and check the status of the wireless adapter, enable if required. (it could be disabled or the switch (if the adapter is built in) may be off.

2. once enabled configure your network adater to receive network configuration automatically, go into the network adapter properties, go down to protocol tcp/ip, select it and then click the properties button, select the "obtain and Ip address automatically" and select " obtain DNS server ip address automatically" hit ok, and ok again,

3. does the router have any key configured. if your router was set up by someone and this person configured some basic security on your touer he/she should've given you a network key and router name, that's how you can connect wirelessly to your router. find that info and attempt to connect the router by going into your wireless networks. if the name of your router is not visible, it may still be there, so you may have to type it in.

I don't know how computer savy you are,... if you need further explanation on any of the points above.. feel free to ask... and we'll guide you further or you find out what version your router is (ex, v1, v2, v3..v9) and check the documentation for your specific router's set up and user guide from this link

good luck!

good luck!


Posted on Nov 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It didnt works, Message in Laptop: we need Password, eventhough we already did setup with CD


To connect to your wireless router, the router needsits wireless settings to be configured with the SSID, encryption key etc., alsothe wireless cards in all the laptops/computers needs to be configured withthese router's wireless settings. Then the laptops/desktop computers cancommunicate with your wireless router and access the Internet via the DSL or cable modem.

Apr 17, 2011 | Belkin Wireless-N Wireless Router with...

1 Answer

I already install the d-link but the problem is i cannot connet to the internet


Try to connect directly the computer to your router. If you have internet connection, try to go to the routers page and from there you can setup your wireless connection. To access the the router page, go to start, run, cmd. Type ipconfig. you will get the default gateway. Then type the default gateway on the address bar when you open Internet explorer. These will open the router page. Then enter your username and password. From there you can already configure your wireless connection

Apr 06, 2011 | Computers & Internet

1 Answer

I am trying to setup a desktop (connected to


i have netgear fs 605 vs/fs608 v2 how to get connected with internet ?

Jan 28, 2010 | NetGear WGR614 Wireless Router

2 Answers

I can'T setup internet on laptop


1st step is to call netzero and as per the setup get it configured.

2nd on your comp go to control panel-network connections- delete all the connections listed their- insert the disc provided with router- run the setup and install it- then connect the usb of router and see if it works..

Clarify ur setup more for more help

Feb 04, 2009 | 2wire HomePortal 100W (1000-400026-000)...

1 Answer

D-link dir-625 still cant acces wirelessly


If your laptop has a wireless capability you should be able to connect to the wireless network of your router, just view the available wireless network select the wireless name of your router and connected to it if it already say connected try to disconnect the ethernet cable from your laptop and access the internet wirelessly..........

Nov 01, 2008 | D-Link DIR-625 (790069292637) Wireless...

2 Answers

Wireless connection failed?


FIRST, LET ME ASK IS THE DESKTOP WIRED---MODEM-ROUTER-COMPUTER

LET ME KNOW AND THEN I CAN HELP YOU. WE CAN DO A STEP BY STEP. I HAVE THE SAME ROUTER.

GET BACK TO ME

Mar 28, 2008 | Linksys Wireless-G WRT54GS Router...

1 Answer

Need help getting the internet on laptop


you may need to register your router thru your cable company unless you already have..

so if you are wanting a wireless connection, then you will need your internet key to access it.. are you already connected with a desktop or are you just trying to get one pc connected? please clarify.. thanks..d

Feb 20, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Pc connection problems


Sounds like you are setup to use Internet Connection Sharing. don't do this. Have each computer connect to the internet via the router. If the router is wireless connect all computers wirelessly to the router that are wireless capable and any computers that are not wireless capable, connect them to the router via a cat5 cable to the cat5 ports on the router. This will solve your problem. BPCS

Dec 30, 2007 | Belkin (F5D5231-4) Router

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...