Question about Computers & Internet

1 Answer

How do I find out my Hughes HN 9000 modem ip address?

How do I find out my modem ip address?

Posted by on

  • ChrisScott May 11, 2010

    try this... from http://www.viasatelital.com/manuales/Ins... Accessing the System Control Center To open the System Control Center on a web browser installed on a computer that is connected to the satellite modem, double-click the System Control Center shortcut on your computer desktop, or follow these steps: 1. Open a web browser such as Internet Explorer or Netscape. 2. In the browser address bar, type www.systemcontrolcenter.com or 192.168.0.1 and press Enter. Note: To use 192.168.0.1, the satellite modem must be configured for a private address, and DHCP must be enabled on the computer. The System Control Center home page appears as shown in Figure 8: System Control Center home page on page 9. If you are unable to access the System Control Center, refer to Cannot Access the System Control Center on page 34. Creating a shortcut to the System Control Center You can create a Windows shortcut on your computer desktop for easy access to the System Control Center home page. Note: As part of the installation process, the person who installed your satellite modem creates a shortcut to the System Control Center, so there should already be a shortcut on your desktop?unless it has been deleted. 1. Open a web browser. Note: The method described here works for Internet Explorer and Netscape Navigator. It may work with other browsers. 2. Type www.systemcontrolcenter.com or 192.168.0.1 in the browser address bar and press Enter. Note: To use 192.168.0.1, the satellite modem must be configured for a private IP address, and DHCP must be enabled on the computer. The System Control Center home page appears. 3. Drag the icon that appears in front of the address displayed in the browser to the computer desktop.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Http://www.viasatelital.com/manuales/Instalacion-HN9000.pdf

Accessing the System Control Center
To open the System Control Center on a web browser installed on a computer that is connected to the satellite modem,
double-click the System Control Center shortcut on your computer desktop, or follow these steps:
1. Open a web browser such as Internet Explorer or Netscape.
2. In the browser address bar, type www.systemcontrolcenter.com or 192.168.0.1 and press Enter.
Note: To use 192.168.0.1, the satellite modem must be configured for a private address, and DHCP must be
enabled on the computer.
The System Control Center home page appears as shown in Figure 8: System Control Center home page on page
9.
If you are unable to access the System Control Center, refer to Cannot Access the System Control Center on page
34.
Creating a shortcut to the System Control Center
You can create a Windows shortcut on your computer desktop for easy access to the System Control Center home page.
Note: As part of the installation process, the person who installed your satellite modem creates a shortcut to the
System Control Center, so there should already be a shortcut on your desktop—unless it has been deleted.
1. Open a web browser.
Note: The method described here works for Internet Explorer and Netscape Navigator. It may work with other
browsers.
2. Type www.systemcontrolcenter.com or 192.168.0.1 in the browser address bar and press Enter.
Note: To use 192.168.0.1, the satellite modem must be configured for a private IP address, and DHCP must
be enabled on the computer.
The System Control Center home page appears.
3. Drag the icon that appears in front of the address displayed in the browser to the computer desktop.

Posted on Nov 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I change the password in a HN7000s IPS modem


Dear Jacques,

Here is a link to the for Hughes HN 7000S IPS Satellite Cable Modem Receiver for the manual with the information you are seeking. http://www.cpe-labs.com/PDFs/HughesNet/DW6000CustomerGuide.pdf
On page (16) sixteen within the PDF identifies all the contact numbers you will need to receive world wide help to assist you with your process.

On page (17) System Control Center explains in detail the internal web server that answers to the address for the DW6000 & DW7000. For the DW7000 follow this link
http://192.168.0.1/. Then to http://www.systemcontrolcenter.com/ .

On page (19) is the portal for your Direct way devices at this link
myhughesnet com .


On page (20) you will find, " How to change your email account password".
At page (37) Broadband Reports.com offers a satellite forum at this link
What browser proxy settings should use with the DW6000 Satellite Forum FAQ...

In conclusion, on the last page of the report title, Direcway Service Plans Ku Band DW7000 NTI,
you are offered a technical support telephone number to contact. It is 1-866-DIRECWAY.


Fare. Well.

Dec 28, 2014 | Hughes Hn7000s Ips Satellite Cable Modem...

1 Answer

Change password on hn 9000


hn 9000 is the modem you need to change the password on the router.

Oct 22, 2012 | Computers & Internet

1 Answer

Have a new Hughes net HN9000 satellite service and trying to get the Netgear wireless router to allow me to connect to the internet. Have two other computer set up for the home network and they can see the...


Hey, Can you perform the task below and paste me the results from the modem:

Connect the modem to the computer. Open command prompt and type ipconfig. Paste me the results for IP address, subnet mask and default gateway.

Also, confirm, how you have connected the modem to the computer. IS it using a ethernet cable or USB?

Once I have this information, I will be able to provide you with an accurate resoultion.



Jun 30, 2009 | NetGear MR814 Wireless Router

2 Answers

Wndr 3300 net gear router wont work with hn 9000 hughes net modem


I went to the Hughes web site to check out the modem. They say it is also a router. I think you will have to disable the router abilities of your WNDR 3300 Net Gear Router.

Get into the Netgear setup by loging on to it.In its WAN setup select Static IP Address and set the Static IP Address to the same as the hughes modem, except for the last number which should be about 50 greater. IE: Hughes 192.168.12.1 and Netgear 192.168.12.55.

In the DHCP setup, disable the DHCP Server

In the Wireless setup, Give your network a name is SSID. You should also set up security to keep others off you internet connection with a WEP key.

I hope this helps.

May 30, 2009 | NetGear WNDR3300 - RangeMax Dual Band...

1 Answer

Connecting D-Link DI-634M to HughesNet HN9000


Both units can not have the same Gateway IP.
Do this:
Hook your PC to the HN9000. Do an ipconfig /all
Write the IP info down.
Then open up the D-links set up page and set it to a static IP using the info you gathered from the HN9000. Select an IP in the range that the PC picked up. I usually use .100. Also, when you set it statically in the D-Link, make sure that you type in the Primary and Secondary DNS.
Once you set the D-Link statically , you should be able to browse the Net through the D-Link.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

May 24, 2009 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

Router will not route to another router of same type


The hughes modem is not a router.
What are you trying to do? Install the Linksys?

Plug the ethernet port on the Hugnes to the "Internet" or "WAN" port of the Linksys.

Then if you go into the config of the Linksys, you can tell if it gets a public IP address.

May 21, 2009 | Linksys Computers & Internet

1 Answer

NetWave Base G4 router "goes to sleep"


well one thing if your router uses the same IP address as your hughes net then they will interfere with each other. hook your router to your pc and leave the hughes modem out of the equation then go to command prompt on your pc and type in ipconfig that will tell you what ip address your router is using that way you can get into the settings of the router and change whatever you need to change.....I would just set it back to default and make sure the ip address is not 192.168.0.1 because that is the dynamic ip for hughes

Apr 30, 2009 | Blitzz Technology (BWA611) Router

1 Answer

Xplornet Sat. connection and D-Link WBR-2310


Can you get a pc to connect to the internet? If you can, what IP address does HUGHES assign? If it is in the range of 192.168.0.X then change the DEFAULT GATEWAY address of the router to something like 192.168.10.1 (out of the box it should be set to 192.168.0.1)

Mar 29, 2009 | D-Link 4-Port Ethernet Broadband Router...

2 Answers

Default IP Adress of the modem Hughes HN7000S


The Hughes addresses are 66.82.4.8 and 66.82.4.12.

Mar 06, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

2,340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...