Question about Zenith D65W25 TV

1 Answer

Fuzzy picture When using the Input 5 on the side, the picture is fuzzy like it is getting a bad signal. This also occurred when using the AV input in the back before switching to S-video input instead of coaxial cable. If you tap the back in the right place the picture will restore. Can you recommend how to fix this problem.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 317 Answers
Re: fuzzy picture

You might want to try a new cable, otherwise it might be a loose jack that if your daring enough, you could fix yourself

Posted on Jan 09, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

What is the blue wire for on a samsung av cable..that has 5 connectors and is green where you plug it into the tv

What is the difference between component av cable and composite av cable

On the five wire cable, the red, blue and green are for the picture. The other two connectore are for the audio. Not all TV's have this type of input. The link above has information about the five wire and other input cables.

Jun 15, 2014 | Samsung DLP HL-P5663W 56" TV

5 Answers

Screen goes black and resets during HD shows

Have you already tried to power cycle all the devices? Unplug the power cable on all your devices for about 1 hour then plug it back in. Check if that fixes it.

Aug 31, 2008 | Sony KP-53HS10 TV

1 Answer

Can't seem to get the av and hdmi inputs to work ?n my pioneer pdp 507xd plasma

Make sure the cable is plugged into input 5 if your tv is on input 5. Make sure that you don't need to be on the AV input. I suggest using a hdmi cable also to bring the resolution up to 1080p. Make sure the wire isn't shorted also.

Apr 11, 2013 | Standard (CRT) Televisions

1 Answer

How do i get a clear picture on the 32 inch flat screen

Chek your INOUT signal if this is low the picture will be bad. Also check the picture in the AV and if there is a good picture the TV is working fine except for the RF input.
You need to check on the tuner and IF sections.

Aug 16, 2011 | Emerson Standard (CRT) Televisions

1 Answer

I have 21 GOODMANS LD2212 TVs and want to play an MP3 player through the "audio in" however it shows no AV signal (yes I have selected AV or SCART source) likewise if I use a scart and connect...

From your description, it seems like the set doesn't activate the AV input unless it sees a video signal. I don't know if it the input is smart enough to require a valid composite signal (that is, one from a source that includes proper synchronizing signals) or if it will work as long as something is there. So here's a suggestion. Get an RCA Y-adapter with one jack in and two plugs out, and split one of the audio outputs from the MP3 player. Feed the audio to the audio input as normal, and connect the other plug to the video input. This may enable the AV input since there will then be some signal at the video input. It won't be a valid video signal, of course, so if it works you'll just see random flashing on the screen. Maybe you can pretend it's a light show to accompany the music.

Mar 30, 2011 | Goodmans Standard (CRT) Televisions

1 Answer

My screen is blue and it wont let me see anything

Your TV is not getting any signal at all to process, or the tuner inside your TV is faulty. Blue back screen comes, when there is no signal to any of its input or faulty tuner. Just connect the tV with any other video source, like VCR or DVD , connected to its AV terminals and set the tV to take input AV, and check whether picutre comes in or not. If picture comes with AV connection, make sure that your tVs tuner is faulty and should be replaced. If no picutre comes with AV connections too, the Chroma Ic insie your TV is faulty, and should be replaced. OK.

Feb 17, 2011 | JVC AV-32S575 32" TV

1 Answer

Cant get picture or sound...Proscan 27113

You can tune to 90 for input 1 S-video, 91 for input 1 composite and 92 for input 2 composite only.
Most RCA and GE brand replacement remotes will work using code 000, or 001. I use code 237 for my 5 in 1 remote and can get PIP and the setup displays to work.

Jun 15, 2009 | Proscan PS27113 TV

1 Answer

Screen goes black and resets during HD shows

I just posted this to another Sony owner:

Another point; HD Ready does not mean that it is HD compatible without the addition of an optional part.
The title only implies that it can be adapted to HD reception.
If you did not purchase it with the set, check your user guide to see what you need to make it whole.
You may have to seek this add-on on eBay since it is not guaranteed that Sony will still offer it.

You might want to check this:

Technical Details · 53-inch HD-ready rear-projection TV (doesn't include HD receiver); 48 x 57.5 x 25 inches (W x H x D)”


Aug 31, 2008 | Sony KP-53HS10 TV

2 Answers

Av black and white

please don't take this as me doubting your intelligence, but are you sure your wires are good? sometimes they can become worn out inside of the protective rubber, and partially fail.
Also, how old is the TV? I just got one (for free so i can't complain) from a friend that will start in color on av and then turn to black and white because something inside of it went bad..

May 09, 2008 | Spectra Logic Hello Kitty 13" TV

1 Answer

Blue Screen

I just wanted to suggest some things for you to try, if you have not done them already. Try hooking up a known good signal, such as the main input cable from your cable or dish, hook it straight to your tv, and see if you can change channels, and get a picture on low band...2 thru 6, and then if not, how about any picture above channel 6, if you get picture on 2 thru 13 now, it could be whatever you have hooked in between the input cable and the sure you have the tv on the right channel for your receiver, usually 3 or 4, or if you are using another type of video input cable, make sure you have tv on the right input for that cable and that cable is good...check the in and out of your component unit, for correct cable hookup as well as your cables, in reference to using RCA video and audio left and right in and out...a lot of sets and vcr's will go to a blue screen if they lose signal to them....I hope this helps you out some.If you cannot get a picture from hooking your signal straight to your tv, it could be the tuner got a spike from a thunderstorm, or has lost the B Plus source for the tuner circuit. Be sure that it is not selected for an input signal,other than the cable or antenna mode, the onscreen text should verify this, if you can change channels with or without getting video...a picture....Good luck with it. T.

Jan 15, 2008 | JVC AV-27S33 27" TV

Not finding what you are looking for?
Zenith D65W25 TV Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66516 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Anastasio Benjou

Level 2 Expert

99 Answers

Are you a Zenith Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides