Question about Innovage Jumbo Remote Control

1 Answer

Need code for cable box(motorola)and tv(rca) can

Need code for cable box(motorola)and tv(rca) can u help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,335 Answers

The RCA TV codes for an Innovage Jumbo Remote are: 000, 003, 004, 005, 007, 009, 011, 015, 048, 082, 092, 094, 096, 098, 101, 102, 103, 107, 113, 125, 129, 167, 179, 187, 188, 191, & 194.

To program your remote by entering a code, follow these steps:

  1. Turn on your TV.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
  4. Enter the first set of 3-digit codes from the list. The LED will blink once every keypress. After the 3rd digit, the red LED will turn off indicating that the code was recognized for the device. If the code was not compatible, the LED will flash several times and you need to return to step 2 to try that code again or to try the next code in the list.
  5. After the LED has turned off, aim the remote at the TV and press ON/OFF. If the device turns off, you have used the correct code and the remote was successfully programed. If the device does not power off, return to step 2 and try again with the next code in the list.
There are so many codes to try, you may want to try the auto-search function that I am going to describe below.

I don't see a code for a Motorola cable box, so I advise using the auto-search function for CABLE or SAT.

To have the remote try each CABLE or SAT code it knows one at a time, follow these steps:
  1. Turn on your cable box.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the CABLE or SAT button on the remote so that the LED blinks once and then remains solid red.
  4. Press the ON/OFF button slowly and repeatedly until the cable box turns off. The LED will blink once each time you press the ON/OFF button.
  5. Once the cable box turns off, press the ENTER button to store the code and the LED will turn off.
To program the remote for your TV, repeat this process starting with turning the TV on, then follow the steps substituting the TV button for the CABLE or SAT button.

I hope that helps.

Posted on Nov 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a motorola dcx 3200 cable box and its asking for command code please help


Codes to check with motorola are 035,048,029,085,092. If you wish to get more codes and other details, check this link.

Feb 15, 2013 | Televison & Video

1 Answer

Mintek DVD-1600 Setup to cable box/tv


A dvd player that doesn't record hooks straight to the television, not the cable box. Tv's typically have av jacks. If yours doesn't, you will need to buy an rf modulator. If your tv has the jacks, U will need to use your tv remote and hit tv video or input or source on that tv remote to switch between input and tv modes.

May 03, 2009 | Mintek DVD-1600 DVD Player

1 Answer

I need codes for my cable box its a moterola cable box from shaw in winnipeg manitoba my name is justin ledoux could you send me some codes pleaz


Sorry it took so long to respond to your request for assistance.[Motorola... 5000, 5002, 5003, 5028] These are the listed codes for your remote control to use with a Motorola cable box. I hope this information solves your problem, of needing the codes to use with the remote control and you Motorola cable box. Thank you for using FixYa and have a nice day!

Feb 10, 2009 | RCA 3-Device Universal Remote with...

1 Answer

Remote Code lost and I have a motorola cable box


Here you go and it's FREE!!! =>

http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/rca/rcr450-manual.zip&area=other

Jan 03, 2009 | RCA RCR450 Remote Control

1 Answer

Have a D771 controller and the cabe box that I have has no code for it


**** IT UP.......DRIVE TO TARGET OR ANY OTHER STORE....... AND SPRING FOR A NEW UNIVERSAL REMOTE... AND THEN LOCATE YOUR HEAVIEST HAMMER....AND PROCEED TO BEAT THE HELL OUT OF YOUR .... ( R.C.A. - CRK76SG4 ) UNIVERSAL REMOTE !!!! .... THEN SCRAPE UP THE SAID REMOTES REMAINS....... DRIVE YOUR NOW SMILING HAPPY *** TO YOUR NEAREST DIRECT T.V. LOCATION.........AND WITH A STRAIGHT FACE TELL THEM YOU WOULD LIKE TO EXCHANGE YOUR "FAULTY" REMOTE FOR ONE THAT WORKS (ALL THE TIME) IF ASKED STICK TO THIS STORY......... THE R.C.A. CRK76SG4 REMOTE SIMPLY SELF DESTRUCTED AS I WAS INNOCENTLY "CHANNEL SURFIN'" ACT SURPRISED AND BE LOUD.......THEY WILL GIVE YOU THE REMOTE.... NOW ENJOY YOURSELF THE NEW "FULLY FUNCTIONAL REMOTE"


OH, AND SWITCH TO DISH!!!!!!!!!

Oct 28, 2008 | RCA DIRECTV Satellite Remote Control

1 Answer

Codes to operate a cable box with TV remote


Try code 038. If that doesn't work try 039.


Aug 05, 2008 | Televison & Video

2 Answers

Gain control of my Motorola cable box with a Sony RM-Y167 remote


Cable Converters (Set Top Boxes)

Director 0476
General Instrument 0476
Jerrold 0476
Motorola 0476, 1376
Pioneer 1877
Scientific Atlanta 1877

HOPE THIS WILL HELP YOU!!

Feb 12, 2008 | Arris SB5100 SURFboard DOCSIS 2.0 Cable...

5 Answers

Emerson jumbo remote


snowlady: You probably got it already but if not, here ya go:

Magnavox TV: 004,008, 009, 069, 074, 075, 077, 089, 163, 165

Matthew: 173, 183, 198

ronnmelplus4:

RCA TV: 000, 003, 004, 005, 007, 009, 011, 015, 048, 082, 092, 094, 096, 098, 101, 102, 103, 107, 113, 125, 129, 167, 179, 187, 188, 191, 194

RCA VCR: 000, 003, 021, 055, 060, 082, 083, 084, 086, 087, 088, 089, 090, 091, 107, 110, 115, 120, 125, 134, 137

Emerson Combo: My book doesn't list Emerson, only JVC, Philips, Sansung and Sanyo

Jan 23, 2008 | Emerson EWC19T3 19 in. TV/VCR/DVD Combo

2 Answers

Jumbo Universal Remote


I have a Motorola DVR from Comcast. Code 051 will make all the cable functions work. Haven't figured out how to do anything with the DVR bits,

Dec 26, 2007 | Universal Remote Control NspireGear MP3...

Not finding what you are looking for?
Innovage Jumbo Remote Control Logo

374 people viewed this question

Ask a Question

Usually answered in minutes!

Top Innovage Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you an Innovage Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...