Question about Canon imagePROGRAF iPF8000 Printer
First before every print my ipf8000s beeps and The screen read something like the printhead R needs to be cleaned to ignore press online... I would clean it but nothing changed...so I just kept pressing online to ignore and it would print fine... I then uploaded firmware 1.39 and now it does not give me the option to press online to ignore the error... it tells me to clean the printhead r or replace..... I just began to use this printer around january and have already changed the printheads like 3 times.... the printhead isnt very old maybe, 4 months +/-.
what can I do besides wait for canon??
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Go to www.canontechsupport.com and follow the thread to get to the support for your mutifunction machine and error message. Removing all the tanks and reseating the printhead worked for me, although it appears it didn't work for others.
I carefully wiped some of the ink from the edges of the printhead assembly, but don't know if this really did anything. My 830 is about 18 months old and I have been using both Cartridge World and Canon ink tank replacements.
Posted on Apr 29, 2008
Hi follow the instructions as above...
ie Remove inks and print head...
Whilst Canon print head is out...
Use cotton wool and alcohol and clean electrical contacts on back of print head and where they make contact inside printer.
Then install print head and inks and test.
If it does not work you may need to replace print head.
Posted on May 10, 2008
try this link : I followed the directions and fixed the problem. the instructions that came with the new printhead weren't really complete.
Here's essentially all I did for my fix - Opened the printer top, turned the printer off. Removed the "bad" printhead, cleaned the metal contacts on the printhead and printer with windex. Closed the printer. Turned it on. waited for it to reset. Opened the printer. Turned the printer off again. Installed the printhead. Closed the lid. Plugged the printer in again. When it was ready I accessed the HP toolbox and alligned the printheads and cleaned the printheads. It worked. Here's a link with photos.
Posted on May 01, 2009
Open the front cover of the printer and replace the catridges. For more info, download the manual for the same from the vendor website.
Revert back for more assistance.
Posted on Jan 28, 2010
Tips for a great answer:
Jul 10, 2014 | Canon imagePROGRAF iPF8000 Printer
Jun 15, 2010 | Canon imagePROGRAF iPF8000 Printer
Apr 22, 2010 | Canon imagePROGRAF iPF8000 Printer
Jun 02, 2009 | Canon imagePROGRAF iPF8000 Printer
Feb 21, 2009 | Canon imagePROGRAF iPF8000 Printer
Nov 24, 2008 | Canon imagePROGRAF iPF8000 Printer
Jan 04, 2008 | Canon imagePROGRAF iPF8000 Printer
Apr 07, 2007 | Epson DFX-8000 Matrix Printer
273 people viewed this question
Usually answered in minutes!