Question about Maytag 24 in. MDB9750AW Dishwasher
You could have a burnt out element.You can take the bottom panel off and look for a burnt wire at the element.Look at the thermostat wired to the element,Without a meter thats it.If its the element, You need to go to an Appliance parts store or order on line.There all over the place Parts stores Look on line for one near you.
Let me know, once done.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
Posted on Nov 16, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Maytag quiet series 300
Maytag Quiet Series 300. The lights flash in sequence starting from the outside traveling inward. The timer counts backwards from 50 to 1. Then the sequence starts over. and continues over and over. I'm able to clear it when the time reaches 1 or 2. It stays off for a while (3-4 hours) then starts over. I can not clear the countdown until it reaches 1 or 2. After I clear it the dishwasher will work, but until then, no way. This happens with the door open or closed.
Posted on Sep 19, 2008
Our control panel is fine. For now. (The machine is only 3 months old). This is our problem--and I haven't yet seen this complaint at all over the internt: The lower wash arm is getting stuck on the bottom rack and stopping immediately. This seems to be a design flaw. The bottom rack is just built too low. A service man was out once. He tightened the wash arm. Didn't work. The service department at the dealership is now ignoring our subsequent calls!! So I wonder if the "not cleaning" problem you have is because of this.
Posted on Apr 05, 2009
A water softner will not make the dishes any cleaner, it just makes it so they don't have water spots on them.
If the dishes are dirty, it is most likely that the nozzles (holes) in arms may be plugged.
Also check to make sure you are getting plenty of water to dishwasher. Make sure all water valves are full turned open.
If the control panel does not work all the time, it is very likely you have either a shorted wire, or a fualty main board which is very common in newer machines.
Posted on Jun 01, 2009
Tips for a great answer:
Jan 20, 2013 | Maytag Dryers
Jan 12, 2011 | Maytag Dishwasher
Jan 15, 2010 | Maytag Washing Machines
Nov 07, 2009 | Maytag 24 in. MDB9750AW Dishwasher
Jun 01, 2009 | Maytag 24 in. MDB5601AWS Stainless Steel...
Apr 05, 2009 | Dishwashers
Mar 20, 2009 | Maytag 24 in. MDBH955AW Built-in...
Sep 11, 2008 | KitchenAid 24 in. KUDI02IRBS Stainless...
Jul 18, 2008 | Dishwashers
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: