Video blinking in and out

http://www.casio4business.com/sa/products/downloads/manuals/PCR-T265_E030611A.pdf

Hi Sandra, the above link is the actual user manual. The tax programming is on page 11. They also give a 1-800 number for help on programming. Hope this helps!

Hi
There are many reasons why a computer might not display. The most obvious are
1. Monitor not plugged in (mains or computer), powered on etc
2. The video/graphics card which translates the computer's operations to a format the monitor can display may be faulty, set to a resolution the monitor can't handle
3 The video card may not be seated properly in its slot
4. The section of the motherboard dealing with graphics may be faulty.
5. The power supply being distributed by the motherboard to the graphics card slot may be not working/insufficient.
Hope this gives you some idea of the possible answers to your question. A lot more detail on the computer, graphics card, monitor etc is required to give a more relevant, less generalised answer.
All the best

Hi Nathan
Contact the authorized service center. These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power led, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating, to many popular brand TVs and other devices. Viewing it in "Mosaic" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given.

Hi,

Blinking of the Lamp LED at the front panel is an indication that the bulb is already burnt out. You have to replaced it with new one. Click it HERE to order online.
Watch the video below to have an idea where is the lamp located on the set.






Hope I helped you.

Have a great Holidays!

Jdvillanueva

Hi, you can download a new driver from here:

http://www.gigabyte.com/products/product-page.aspx?pid=2358#dl

Please select your operating system.
Select the vga driver and click on one of the download links.
Please unzip the file before installation.

My guess is that must have been a virus or something bad on that harddrive.
Maybe the harddive has installed a wrong driver for your graphic card.

You can download and install and run scan
for virus with these to free programs:

http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html?tag=mncol;1

http://www.superantispyware.com/download.html

You will be suprised how much these to will find.
Remember to delete the found items.

Hello,

Bad news, the finepx A500 does not record sound with its movies.
This is suprising, see page 66 of the manual under "Recording Movies"

Hope this helps.

if your phone is still covered under warranty then Nokia will have to make satisfction of you. If they r not then there are many law. Go to your nearest consumer court, they will help u without costing u a single coin.

http://www.youtube.com/watch?v=Gj_gEwHOQEI&NR=1&feature=fvwp
try this you'll be suprised

Yep,I would check all the fuses first,then I would at least take a peep under the seat for a cut,chaffed or broken wire.You would be suprised how many obvious problems you might spot to save you a trip to the dealer!! Hope This Helps

Does it go into standby when it's in another mode like : Cd or Video 1 or tape?

When you state that you checked the power amp IC's , how so did you do this?

Thanks n' let me know.