- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
In the menu there might be something called Convergence....If that's an option give that a shot. Otherwise look up a tech manual for your specific type and see if you can find what you need. I know most of the major brands are available.
Yes,U know how to solders?Must replaced the 2 convergence ICS and all it resistors. Buy a convergence kit at Tv Repair World.com,Tvrepairkits.com.To repair it ur self. The shop will cost U $300 for parts and labors.
you need to replace both STK392-120 Convergence Ics. You can get replacement Ics at the following link and they provide free installation instructions so you can do the repair your self. Heres the link http://servicemanuals.vstore.ca/
I'm no expert, but I think that you have a problem with the convergence
of the 3 color guns. I've been working on a similar problem. As a first
step, have you tried "Magic Focus?" The Magic Focus button for the
Hitachi 53UDX10B is at the left of the small front panel controls that
also include your RCA composite and SVideo connectors. Let the set warm
up for about 20 minutes (as recommended by the user guide), and then
press the Magic Focus button. When you press the Magic focus button,
the set will auto align the 3 color guns. If this doesn't fix your
problem, unplug the TV for at least 4 hours and try again.
Good Day, codysdad0331;
Before calling an Authorized Service Center, try unplugging TV from wall for 3 to 5 minutes plug TV back into A/C outlet (reset). If no fix call "ACS". Average cost for you TV is about $650.00 depending on shop, location; always get a written estimate. Good Luck, big IRISH.
Yes it certainly sounds like you have the old convergence outpuyt IC's that have gone bad in this TV set. If you have the soldering skills, and know how to work on printed circuit boards, you can repolace both of the STK convergence IC's. If you do not, you can get the complete convergence board at http://www.ptscorp.com, and the Hitachi board number is JT22056. Good Luck