Question about Cameras

1 Answer

Card error on Agfa digital camera

I have an Agfa DC-1003s camera only brought in july with a SD 8G memory card inside and untill two days ago was fine and i could view pictures but now when i switch it on it says card error?and i cant view any existing pictures.does this mean ive lost all my photos or how can it be fixed?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 11,967 Answers

Get a card reader (they don't cost much) and download your pics to your computer. Then, put the card back in the camera, go into the menu and scroll to "format" and follow the on-screen instructions. This will erase and optimize your card. My advice, don't leave your pictures on the card for very long...get in the habit of downloading on a regular basis and format the card regularly.

Posted on Nov 16, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Looking for manual for AGFA Photo DC-1003s Camera anyone know where I can get one???

Try :

Sep 22, 2014 | Cameras

1 Answer

My camera doesn't see SD 16GB anymore. Worked fine until a few days ago. SD works fine on PC

Try inspecting the memory card slot, eventually with a magnifying glass. Sometimes just a little bit of dust, a small paper or other debris, can block data transfer. Be sure al contacts on the card, but also in the camera are clean and shining. Never use sharp tools in or around a camera. Don't scratch the contact points.
And to make sure you can put pictures on a memory card, there must be space. If possible try to format the card in the camera. Just to make sure the camera sees the correct file system on the memory card.

Dec 15, 2013 | Panasonic Lumix DMC-FZ28 Digital Camera

1 Answer

Card on the camera has locked

Are talking about the SD memory card? If so there is a tiny little slider switch on the side of card, it is marked "Lock" and "Unlocked", make sure you haven't inadvertently moved it to the locked position.

Dec 23, 2011 | Agfa Pix Cameras

1 Answer

WHAT Sd Card is used in the Agfa DC1003S camera?

You may use any SD card, up to 2GB in size. You may also use any SDHC card, up to 32GB in size. A faster card may download faster if you use a card reader but will not affect the operation of the camera. Any of the major brands will work.

Feb 21, 2011 | Agfa DC-1030S Digital Camera

1 Answer

8g sd card doesnt work on jvc says card error

Each camera have maximum memory card to be readable. If the memory capacity is to high from the limit, the camera will hard to write the data inside the card and said that "card error".
Try to insert memory card with lower capacity (4 or 2 GB) and read the user manual to know optimum memory card for your device.

Hope this help and RATE please !

Jan 16, 2011 | Cameras

1 Answer

My agfa camera all working but put memory card unlock coming

The error you mentioned is usually when the memory card is unreadable because it is locked. If you check the picture below you can see that there is a lock button. If you slide it down the memory card will be locked and will not be readable, if you slide the button up it will be readable and will be unlocked!arjuun.jpg

Dec 06, 2010 | Agfa DC-730i / AP1100 Digital Camera

1 Answer

Ive got a agfa dc-1030 digital camera,and got a 2.0gb sandisk memory card,it was working fine,then suddenly now it says card error when i turn it on,could you tell me why its doig that?

Did you ever format the card in the camera before you tried to use it? This is necessary to optimize the card for the camera. This will erase the card so download any pics first using a card reader if necessary.

May 17, 2010 | Agfa DC-1030S Digital Camera

1 Answer

How can I get my Agfa DC/1003s camera off of

if your talking about your friend was changing the color on the camera and it got stuck on the color you didnt want, i suggest going on the camera like turn it on and go to the colors where you was at before (changing the color) and then choose the color you want meaning go back to the spot on the camera where you got stuck and choose another color.

Oct 28, 2009 | Cameras

Not finding what you are looking for?
Cameras Logo

Related Topics:

1,295 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

79865 Answers

Brad Brown

Level 3 Expert

17155 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides