Question about Kodak EASYSHARE 5300 All-In-One InkJet Printer

3 Answers

My KodakEasy Share 5300 will not print in black.

I have a Kodak Easy Share 5300. It prints color elements fine, but will not print using the black cartidge--anything, not text, not black elements in a photograph, etc. I have tried recalibrating the printer and the test page does not print properly, but there is no recalibration. By, the way, the ink cartridge is new.

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 78 Answers

My KodakEasy Share 5300 will not print in black. - 92b8b47.jpgThe Kodak AiO printers 5000 series and ESP series PRINTHEADs has orange protective cap that need to be remove to fit on the printer carriage. For the ink cartridges 7b91cbc.jpgthere is also a orange protective cap.
Issue that its not printing black and deep clean and removing the printhead and reinstalling the printhead (reseating printhead) is already done and still no black when printing. The printhead should be replace. For futher assistance call 1 800 421 6699 Kodak AiO printer support line

Posted on Nov 19, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 262 Answers

Have you done the deep cleaning o the printhead? If yes try to reseat the printhead and the ink cartridges, but do not forget to calibratre it again because you need to calibrate the printer everytime you remove the printhead.

If this issue not solve it means printhead is clogged you need to call kodak 1 800 421 6699 for printhead replacement i think its free of charge

Posted on Nov 16, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 225 Answers

Maybe you didn`t remove the protection from the cartridge, (some tape with a piece of paper on the cartridge`s flexband).

Posted on Nov 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Kodak Easy Share 5300. Just changed both


  1. Check that your color cartridge/toner is not empty or blocked.
    This is the least likely cause of the problem, but an important check to make. Most color printer drivers and/or software provide functions to verify alignment and color output. Consult your manual or open your printer driver by clicking Start : Settings : Printers and right-click on your printer's icon and select Properties. 'Browse' the Properties dialog for options that perform system checks.
  2. Look for a 'Print only Black and White' option.
    Open your printer driver's Properties dialog (see above) and look for a color option that uses black only. Uncheck it or select an option that enables color. Some color printers have different resolutions for color and black-and-white (usually higher resolution in black-and-white). Some applications (not Origin) will force a printer to use a quality mode that affects this option, and if the resolution is forced to its highest the color output may be disabled.
  3. Enable gray scale printing.
    Some combinations of printers and operating system versions can lead to a miscommunication between Origin and a printer driver. Under these circumstances, Origin may 'think' it is dealing with a black-and-white printer when it is actually using a color printer. Beginning with 6.1, the Origin Print dialog displayed one of two messages depending on the print capabilities read by Origin:
    1. Enable color as gray scale
      This check box displays for color printers
    2. Use simplified colors
      This check box displays for black-and-white printers
    If you are seeing the first checkbox and you are using a color printer, then checking the box should tell Origin to send all color information and let the printer handle any conversions that may come up. In earlier versions of Origin there was a rather cryptic "Print color on black and white printers" checkbox which did the same thing.

Apr 30, 2010 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

My kodak 5500 AIO easy share printer will not print black ink.


Hi,

follow the step by step solution from kodak.

Choose All-in-one printer and then Print quality and follow the further steps. I think it's a problem with your printhead.

Oct 11, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

My kodak easy share 5300 has printing issues. I


Try this one, Turn on the printer, Take out the inks, remove the printhead, put back the printhead make sure it will snap and you hear a click, put the inks back, wait for the printer to initialize, Press the Menu button, look for Calibrate printer, then print calibration page, then scan it after. Load a regular paper. Then try to print a demo page by pressing Photo and Copy at the same for 5 seconds then let it go. If same problem persist call this no for further assistance 1800 421 6699
Thanks

Aug 29, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Color of the picture printed out is not the same as the printed


Your printhead has failed. Call kodak for a new one. They are aware of the problem.

Feb 24, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

My Kodak Easy Share 5300 doesn't print black ink


You need a new printhead. Call Kodak and they will send you one.

Jan 19, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Kodak Easy Share 5100 will not print after I changed black cartridge


Press copy and photo at the same time and print a demo sheet. Look at the eyes of the two kids in the picture, if they look like zombies, your printhead is clogged. try cleaning the printhead and print the demo again. If it's the same, you need a new printhead. Call Kodak.

Oct 08, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodak 5300 not printing colors


Kodak told me to take the printhead off and reseat it several times, which I did. I then deep cleaned it, calibrated it, and replaced the color cartridge. It didn't solve the problem. Kodak will replace the printhead for free, and after I return the defective one, will send me a free color and black cartridge. Very nice service. I've been very happy with the 5300.

Mar 09, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5300 All-In-One InkJet Printer Logo

407 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Cindy Wells

Level 3 Expert

5165 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...