Question about Canon imageRUNNER C3200 Copier

1 Answer

Two weeks ago I saw on Fixya service that my error code E000020-02b0 was a Magenta drum. I replace it this week and ran the printer about 400 copies then the unit stopped and a new code (almost the same) appeared, E00002002d0. I was instructed to turn off the unit then turn back on. I did this. Now the unit just runs constant saying the "printer is warming up" 1/2 the first time then I tried to finish the print run I was on. The unit acted like it was in "Slow Motion" the green lights stayed solid for a long time , then flashed for a long time and when I thought it was going to print the unit had to warm up again. I turned off and on several times for two days - no change. I saw today that my new error code says I needed a new drum according to some Guru, but the error code last week said that and it ran fine for 400 prints. The error coes were the same except the first had "B" as in "Boy" and the second had "D" as in "Dog"

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

There are sensors just underneath that may be covered in excess toner waste. I tend to see that a lot when the company i worked for did canon machines.

Posted on Nov 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error sc300 on Ricoh mpc 7500. i replaced the drum unit and its fine but after two weeks the error came up again


The error code you gave shows several possibilities for your issue:

Drum charge corona wire, The output of the charge corona wire of the black PCU is abnormal.

Causes

• CGB power pack connection loose, broken defective • Check CGB power pack connection to BCU • CGB power pack defective • BCU defective • Replace OPC drum

Of the five possibilities above, replacing the drum is the most likely cause. Since you only had your drum for a couple of weeks I would take it back to where you purchased it and ask for replacement. Sometimes you get a bad drum out of the box from the manufacturer. It happens. If the same error code pops up again, I recommend you call your local Ricoh dealer for further troubleshooting.

Aug 26, 2016 | Ricoh Aficio Office Equipment & Supplies

1 Answer

HP Color Laserjet 9500hdn printing yellow streaks at bottom of page


I'm not familiar with this model but have you ran the cleaning mode if it has one?

Aug 23, 2012 | HP Color LaserJet 9500HDN Printer

1 Answer

Waste Full


More than likely the magenta cartridge is bad unless you have run a lot of magenta copies or prints and exhausted it.

If you are running an apple computer they do not always interperate themessages correctly from a Xerox printer.
You can fix that by making ABSOLUTLEY certain you have the right print driver installed!!!
Been there done that.

Mar 19, 2012 | Xerox Phaser 6130 Laser Printer

1 Answer

Okidata C5200N printer: streaky copies on magenta


If the streaks are only from the magenta then your magenta drum is bad. If you recently replaced it, it may still be under warranty.

Jan 19, 2010 | OKI C5200n Laser Printer

1 Answer

I have a Oki C9500 laser, the magenta print is streaky


I have the same problem with my OKI c3100, please help

Jan 13, 2010 | OKI C9500dxn Led Printer

1 Answer

We have a Phaser 7400. It continues to give us


If you've already changed out the toner cartridge and the problem persists, then it could be several other parts that are either defective, dirty or blocked.

You may want to contact a certified Xerox technician and have them look at the Imaging Unit Agitator Bar and the Low Toner Sensors for Cyan/Magenta. There could also be a faulty toner supply motor.

Sep 10, 2009 | Xerox Phaser 7400/DT Laser Printer

3 Answers

Error code E000020-01b0, E000020-0260


E020 is a Drum/developer error code

-01b0 is a yellow drum error

-0260 is a magenta drum error

drums need replaced

7622A001AA Yellow drum part#

7623A001AA Magenta drum part#

7624A001AA Cyan drum part#

7623A001AA Black drum part#

Aug 20, 2009 | Canon imageRUNNER C3200 Copier

1 Answer

Replace photoconductor message keeps appearing


Reset it .
If you are enter service mode 5-912 default 60K just input Zero "0" this will deactivate the PCU counter.

If it is bad you will have to replace it. It is the Photoconductor(Drum / Developer) Cartridge

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Aug 26, 2008 | Ricoh Aficio 1515MF All-In-One Laser...

Not finding what you are looking for?
Canon imageRUNNER C3200 Copier Logo

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1973 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...