Question about Janome Memory Craft 9000 Computerized Sewing Machine

3 Answers

Janome MC 9000 off touch screen calibration

To use menu selections on tiuch screen you have to touch to the left of the icon.
Machine just back from service never had this prob before
How can I adjust the position to the middle of the icon?

Thanks
Ian

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Thanks guys

I remembered the fix!!

On the Janome MC 9000

To calibrate the touch screen

1. Turn off
2. on Sewing arm above needle there are a series of buttons
3. Hold down bottom 3 buttons
4. While holding turn on machine
5. Using scribe
6. Touch the centre of each + as it appears
7. It will go Centre bottom rh centre top lh as you select each + position it moves of it's own accord.
8. Turn off machine
9 Turn on and test.

Important sometimes this does not entirely fix prob!!
Simply do it again "Yahoo""
Some mechanics will try to tell U the screen is on it's way out
Bollocks just calibrate.
Thanks
CYA

Posted on Nov 16, 2009

  • catherinekas Jul 17, 2011

    I had this same problem with my Janome 9000. The repair guy told me I needed a new mother board and something else too and that the parts alone would cost $900. He also said that labor would be $65 per hour.

    So, ok. I kept the machine but didn't repair it because I could still sew a straight stitch and the other 8 stitches that showed up on the first screen. I figured I could still use it until I saved enough to buy a new machine. I could not, however, get past the first screen. The turn the page icon simply would not work. I couldn't access the stitch length or width regulator page either.

    My daughter figured out that if you pushed the space to the right of the icon, you could make it do what you wanted. We found that we could, indeed, access all the pages and all the stitches just by pushing a little to the right of the icon even though there wasn't really much room to push in; especially where you turn the page and go to the next screen. There was what? a 16th of an inch?...you could only get a fingernail in there.

    Thanks so very much for your answer. I truly, truly appreciate it. You have saved me about a thousand dollars. Your recalibration fix worked and the machine is perfect once again.

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Janome Master
  • 1,388 Answers

Best to do the reset routine 3 times.
For some reason it can take this many to actually complete the re-calibration successfully
Bargain Box

Posted on Apr 12, 2010

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The touch screen wont work on my MC 9000. The power is there but the screen just wont work. Any help would be great

Thanks
Jenni

Posted on Aug 18, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Non responsive touch screen janome mc 9000


can you not take or send the machine back, you say you just bought it?

Apr 07, 2016 | Janome Memory Craft 9000 Computerized...

2 Answers

Display problem


Hi Wendy,
If you care to email me I can send the MC 9000 screen reset details as a first step to identifying the problem.
Please remember to specify what you are requesting as there is no direct link from this site and we receive many requests each day.
Use the Contact Us form at the site linked below
Cheers
Martyn
Bargain Box

Mar 12, 2010 | Janome Memory Craft 9000 Computerized...

1 Answer

The icons are out of sync.


Have a sewing machine needle handy and turn the machine off.

With your left hand, press and hold /StartStop, Up/Down and reverse while switching on the machine. The screen should display little cross hairs. Using the BLUNT end of the needle NOT THE TIP, press the exact center of the cross hairs. Continue a the cross hairs will change positions on the screen. When finished, switch machine off, wait five seconds and switch back on.

Jun 27, 2009 | Janome Memory Craft 9000 Computerized...

1 Answer

I have a Janome MC9000. The touch screen is out of sync with the icon. I purchased on eBay so no dealer will touch it. Only one function on the extreme right hand (the instruction panel) works (the menu...


If you would like instructions on How To Reset the Touchscreen for the MC 9000 (or other model Janome) so that the icons re-align, please use the link below to contact me and just make sure to mention the specific request and model number (we get a LOT of mail).
Same Reset offer applies for other Janome Touchscreens, and we even even have a replacement LCD Backlight for any MC 8000 or MC 5700 that is growing dim.
Bargainbox.com.au

Jun 19, 2009 | Janome Memory Craft 9000 Computerized...

3 Answers

I have a Janome MC9000. The touch screen is out


You need to adjust the screen. Turn the machine off. Press simultaneously the three buttons on the front (Start, reverse and stop) at the same time turn the machine on.

Press the crosses that appear on the screen and it should all be fine.

Jun 10, 2009 | Janome Memory Craft 9000 Computerized...

3 Answers

The sewing advisor screen on a Janome 8000 is getting dim.


When your Memory Craft 8000 or MC 5700 is otherwise working fine but the LCD display screen begins to grow darker and you find you just can't read it, the only thing you can do is replace the LCD screen, or buy a new machine.
Janome no longer stock this item direct, but there is an affordable replacement available.


Full Access and Installation instructions are provided, so you can DIY or have someone else do the replacement for you.


Check this Link


Also includes advice, links & contacts to be able to Reset your screen and do a Self Diagnosis Routine to test your machine BEFORE you purchase a replacement LCD backlight for either the Janome MC 8000 or MC 5700, so you can check that there are no other troubles.

Jan 26, 2009 | Janome Memory Craft 9000 Computerized...

Not finding what you are looking for?
Janome Memory Craft 9000 Computerized Sewing Machine Logo

1,456 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1128 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

184 Answers

Irene Tulloch

Level 2 Expert

458 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...