Question about D-Link DI-604 4-Port Cable/DSL Router (DI-604) Broadband (di-604 (dont quote)) Bridge

1 Answer

Have 604 router. all of a sudden only two computers can be active through the router and it does not allow the other two to work. things were working fine with all computers getting browser access... now only 1/2 working... solutions??

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • D-Link Master
  • 32,281 Answers

On the computers that are not getting Internet access, check the LAN cables to the router. Does the Link LEDs on the router for these computers are ON?
If the LED lights are off then the LAN cable and/or network cards are faulty.
Check Device Manager on these computers to see if the LAN card is working and enabled. If not re-install the LAN drivers. If the driver installation cannot detect the LAN card then most likely the LAN card is faulty and needs replacing.
Get back to me with the results of these tests and I can advise what to do next.

Posted on Nov 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, My d-link dl-604 suddenly stopped working. When I plug it in, only the power led and #4 lights are up. None of the other leds are responding nor the internet is not working as well. Please help. Thanks


The following reset procedure will completely restore the default settings on your D-Linkmag-glass_10x10.gif device including your password. This procedure applies to the DI-514, DI-524, DI-604, DI-614+, DI-624, DI-754, DI-764, DI-774, DI-784, DI-804V, DWL-700AP, DWL-800AP+, DWL-900AP+, DWL-1000AP+, DWL-2000AP, DWL-2100AP, DWL-6000AP, DWL-7000AP, and DWL-7100AP.

Step 1 Locate the reset pinhole on the back of the unit.

Step 2 With the unit powered on, press and hold the Reset button.

Step 3 Hold the Reset button for about 10 seconds.

Step 4 Release the Reset button.

Step 5 The unit will reboot. Allow 20-30 seconds before reconnecting.

Step 6 The device is now at factory defaults.

Note: Do not recycle power during the reset procedure.

The default user name for most D-Link devices is admin and the password is left blank.

Hope this helps! Give me thumbs please!

Aug 23, 2010 | D-Link DI-604 4-Port Cable/DSL Router...

1 Answer

Modem and d link


Hello there,

Your internet connection should be setup properly in order for the router to give connectivity to both your computer.

You must contact your ISP and ask them for the IP's and put it in the router.

Apr 05, 2009 | D-Link DI-604 4-Port Cable/DSL Router...

1 Answer

Cannot share connection


The IP address that you have is an automatic IP address the Windows generates. It basically means your computer is not getting an IP address from the router (DHCP). You should try powering everything off. Then, in this order, power on your modem, wait 30 seconds, then, power on your router, wait 30 seconds, then power on your computers...This should fix the problem since one computer is working already.

Mar 22, 2009 | D-Link DI-604 4-Port Cable/DSL Router...

1 Answer

Im having a problum


Without being there to carefully look through the networking setup, I will speculate about this.

A simple thing to check is to see if the computer that is not seeing the net is set to DHCP, and that it properly sees the router to start with. Go through the network setup and compare it to the working computer.

Do the command for ipconfig at the system prompt. Use the /all switch to see that the IP address of the modem is displayed. You can compare this to the working computer.

Sometimes a conflict with the firewall can cause such problems.

Another suggestion is to check to see if your modem or internet service has MAC address filtering applied. Some internet services apply MAC address filtering because they want to charge a fee for each additional computer that is on their internet service.



Jerry G.

Oct 05, 2008 | D-Link DI-604 4-Port Cable/DSL Router...

1 Answer

Router not allowing connection to sites


Turn off the router's firewall or allow for exceptions. Most downloads and other software than browsing use additional ports that the firewall is not allowing to pass thru.

Oct 01, 2008 | D-Link DI-604 4-Port Cable/DSL Router...

1 Answer

....dead port?...........


Most likely dead port. Probably one of the metal connectors broke, or something internally will be not allowing it to connect or is fried.

Truth is there could be plenty of problems. Though judging with this, I would say its broken.

Jul 12, 2008 | D-Link DI-604 4-Port Cable/DSL Router...

3 Answers

No response from the DI-604 D-Link Router


The cable must be of parrallel type......(not cross)... connecting router and the modem or PC...

Dec 23, 2007 | D-Link DI-604 4-Port Cable/DSL Router...

1 Answer

Why won´t my FTP Client work with my D-Link router?


Make sure your FTP client software is set to passive. For security reasons the D-Link router does not deal with an active FTP client. An active FTP client can allow a hacker masquerading as an FTP server to gain access to your computer. Please contact your FTP client software manufacturer to determine how to configure the client for passive rather than active. Note: You will not be able to use an active connection through most NAT routers.

Feb 16, 2006 | D-Link Express EtherNetwork DI-604 Router

Not finding what you are looking for?

Open Questions:

See all D-Link DI-604 4-Port Cable/DSL Router (DI-604) Questions

D-Link DI-604 4-Port Cable/DSL Router (DI-604) Broadband (di-604 (dont quote)) Bridge Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...