Question about SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive

3 Answers

Flash drive repair

My flash drive is not registering on my computer and any other computer in the office it was working fine yesterday. i need to get my information from it. what can i do

Posted by on

3 Answers

Re: flash drive repair

Flash drive not working some problem i need data

Posted on Jul 08, 2008

Re: flash drive repair - SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive Hard Drives

All dead buddy!!
Just buy new one!!!

Posted on May 29, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 788 Answers
Re: flash drive repair

Not much I'm afraid. Sounds like it's dead, happens with thumbdrives sometimes, especially if you pull it out without stopping it or ejecting it properly first. I've heard of software that can try to recover files from corrupted thumdrives but if it's not working electronicaly with the computer it's useless. A data recovery service my be able to access the flash chip on the drive directly but this would cost a lot I'm sure.

Posted on Jan 10, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

When I plug my Cruzer U3 Micro 2.0GB flash drive into my USB port the light flashes once and then remains off. The PC doens't recognize that there is anything connected. This flash drive was working...

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports (com&lpt) right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts

if you need more help with this post a reply

hope this helps you

Sep 08, 2011 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

My usb device was working fine until yesterday when I plugged it in and I kept getting an Unknown device error with the following message: "Windows has stopped this device because it has reported...

Code 43 errors are nearly always caused by a driver issue. However, since you have tried the device in several different computers with the same result, I believe that your flash drive has gone bad or become damaged. Unfortunately this is not an uncommon problem with flash drives. Like any storage device on the computer, make sure you are backing up what is on your flash drive.

I hope this is helpful to you

May 28, 2011 | Dane-Elec DaneElec 4GB USB Drive Copper...

1 Answer

Constant blue flashing light,computer will not detect

I dropped my Trekstor 500GB hard drive and now it registers as a removable disk with message "please insert disk into removable disk". My computer is a Windows vista. Can the Trekstor be repaired and can I retrieve my data. Until now it worked perfectly. Paul

Feb 12, 2010 | Hard Drives

1 Answer

SanDisk 2GB Cruzer micro - worked fine yesterday, plugged it in to the same computer this morning, the light flashed on then went off; computer does not see the divice; I have pulled and tried in other USB...

Right click on my computer icon then go to property then hardware then device manager then uninstall all usb drivers .
then right click on any driver then you see scan for hardware click on it then it automatic install usb drivers then restart computer then connect sandisk to computer.then check.
Thanks for using fixya.
If it helps you please don't forget to rate this solution.

Jul 17, 2009 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

SanDisk 8GB lights up but wont register

This one is just a hunch. The drive might be bad but this is worth a try. Its possible the drive letter somehow changed on the flashdrive. Plug in the drive, RIGHT click on "My Computer" and select "Manage" from the drop down menu. Now select "Disk Management" from the list. If you see your flash drive on the list, right click on it and select "Change drive letter and paths", then click on "change", now assign it a new letter like "F" for example. Click ok, ok, ok. If it showed up the the list and it's still not registering, unplug it and plug it back in. Hope that helps.

Feb 15, 2009 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

Drive Installation

Yes, you can just install your software and the drive but its best that you register immeidiately. They have decent customer service where they will replace you broken drive with a new one, if it dies...that happened to my first My Book Pro Edition be careful...if you are rich and can afford 1000 to have your lost data recovered, then fine. Im not rich and cant afford that so i lost ALL my data (500 gb) on my first drive. Because I registered it, I got a free drive four or five days later, if you have a credit card. Then i shipped them my old drive. Unfortunately, my new drive was fine for a year and died yesterday, again, ive lost ALL my data...consider making an additional backup of things you really NEED. Spending a 100 dollars just for that kind of back up is much cheaper than 1000 to recover the entire drive. Hope that helps. CJ Plourde

May 30, 2008 | Western Digital 500GB My Book World...

1 Answer

No communication

Is it displaying in device manager or it is not at all detecting. In that you may try with it some other system and same problem persist, there is possiblilty for damage. send it for warranty calim. Pen drive easily does not die. Check it in other system.

Any application or data is talking each other with computer and usb drive, then it gives warning try to close all application or any virus infection is there.

Apr 12, 2008 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

2 Answers

Imation Swivel Flash Drive Cant detect

is it several times that youve used your flash driver at your office? and which side of the usb port did you plug it? coz when it is your first time to use your flash drive at your office and your plugging it at the front side of the PC. well there might be something wrong with connection and may cause damage to the board of the flash drive. if it your using it several times, well try to check at your PC, then do the following specs:

my computer (right click and select manage)
and under manage window ( select disk management )
try to see if your flash drive registered (you can see the drives of your PC) and see if theres a volume (either raw/ or theres a partition on it).

if not, well the board of your flash drive might be damaged, mostly these were caused by the power of the system, fluctuation is one of them, then improper plugging of the flashdrive.

Mar 12, 2008 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive

2 Answers

Flashing led light on my hard drive

well the best thing i figured out to do was to purchase a new case. i think the case burned up. i pulled the hard drive out and hooked it up to another drive so to see if it would work. the drive works just fine in the other device, so i ordered another case.

Nov 06, 2007 | LaCie 301103U 500 GB USB 2.0 Hard Drive

2 Answers

SanDisk Cruzer micro 4.0 Flash Drive

Check San disk for this one Or can you Format it in the Lappie then see if the desktop knows it?

May 17, 2007 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

Not finding what you are looking for?
SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive Logo

Related Topics:

635 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk Hard Drives Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

281 Answers


Level 3 Expert

2598 Answers

Are you a SanDisk Hard Drive Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides