Question about Panasonic KX-TG2631 Cordless Phone

2 Answers

Nothing shows up in the display. This has only been recently after a power glitch. The display lights when a call is made or received.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My phone did this well over a year ago. Then, recently, during a snow storm the power in the home begin to surge. Immediately following this the phone quite holding a charge. Then, suddenly one day the display screen started working (first time in over a year) and the phone begin to hold a much longer charge then ever before. I've found that when the display screen quits working now, jiggling or tapping the battery in the bottom of the headset will get it working again. Placing it on the charger results in the display disappearing again but tapping the battery gets it to work.

Posted on Mar 05, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I unplugged the base unit from the wall for more than 10 minutes. Sometime after I plugged it back in (not immediately)the display re-appeared.

Posted on Nov 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No picture


OK, the set is on if get the menu display and you have sound--either a video circuit problem or a glitch.

Do you get picture via the rear audio and video input jacks? this will rule some things out.

Also if not tried disconnect set, any box used, or a receiver from power for several minutes and power back (possible glitch).

Dec 21, 2012 | Hitachi 53SBX59B 53" Rear Projection...

1 Answer

Power is on(green light) but nothing in display screen and cant get it to work. please help. thanks


hello my cuestion is that mij power is green ,and i haven nothing on my display?

greetz
paul pols

Mar 14, 2010 | NAD T762 Receiver

1 Answer

Their is 3 red lights on the power button and nothing will show up on the screen of my xbox 360 arcade


I am sorry to report that you have the terrible red ring of death. This happens when there is a fatal glitch on the motherboard of the XBox due to overheating. There's nothing you could've done, it's just bad engineering on Microsoft's part. Do you happen to have the original receipt? If you bought it recently, it may be under warranty. You may also be able to exchange it at the store you bought it.

Nov 19, 2009 | Microsoft Xbox 360 Console

1 Answer

Targus AMW15US wireless mouse


First are the batteries good?
Normal 0 Turn the mouse over and find the small rest/connect button on the bottom of the mouse and press it. This should connect the mouse to the receiver and work properly. If not, try pressing the receiver button and then press the button on the mouse. This should be done whenever you change batteries or glitch. Hope this helps you. Bud

Dec 16, 2008 | Targus AMW15US Mouse

2 Answers

Problem after loading windows,display???


it could be a problem with the video card video driver,tried going to safe mode,reboot your pc and press F8.Go to safe mode with networking.

Aug 26, 2008 | Toshiba Tecra 9100 Notebook

2 Answers

Dead Polycom 501


u have the cable plugged in backwards
check it

Jul 25, 2008 | Polycom SoundPoint IP 501 IP Phone

1 Answer

No Sound


when the amp is turned on does the unit make a clicking sound a few seconds after the display lights up.

if not the amp's is not happy with it's power or could have a speaker short. Check the display for a fault warning.

Otherwise check you speaker connections.
confirm that and A and B main speaker buttons are correct.

Try some headphones, if you get sound out of the headphone things might not be too bad, if nothing is output remove all your cables and try again.

Yes I know that can be nasty, so label all the cables first.

Jan 21, 2008 | Yamaha RX-V1500 Receiver

1 Answer

Eclipse CD8445


make sure that the additional box is hooked up to the cable, or else the display will not function

Oct 16, 2006 | Eclipse CD8445 CD/MP3/WMA Receiver

Not finding what you are looking for?
Panasonic KX-TG2631 Cordless Phone Logo

626 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

john milligan

Level 3 Expert

512 Answers

george  peters
george peters

Level 3 Expert

860 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...