Question about Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835)
Using your Internet browser, you can access the Router’s Web-Based Advanced
User Interface. In your browser, type “192.168.2.1” (do not type in
anything else such as “http://” or “www”). Then press the “Enter” key.
You will see the Router’s home page in your browser window. The home
page is visible to any user who wants to see it. To make any changes to the
Router’s settings, you have to log in. Clicking the “Login” button or clicking
on any one of the links on the home page will take you to the login screen.
The Router ships with no password entered. In the login screen, leave the
password blank and click the “Submit” button to log in.
You should see the type of security you used (WEP or WPA) and the authentication key you used.
If you need the manual, here's a link to the download from Belkin...
Posted on Nov 16, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You choose a wireless router so you need to install in some freequency. You can choose the freequency by the list like 2.4 G.Hz ect. then just select the link & fix threre working ares / type. Avoid the command prompt. use bessic settings your user manuel help you further.
Posted on Feb 13, 2008
the easiest would be to login to the router and set another network key.
if you're unable to login you'll have to reset the router and reconfigure it.
Posted on Mar 23, 2009
Hold down the reset button on the back of the device. This will reset it.
You'll need to plug in a network cable into the pc and the router. Once that is online go to the belkin admin page by opening a web browser and going to this address: http://192.168.1.1
it will ask for a username and password
admin is the username admin is the password
from there configure the device.
Posted on Oct 10, 2009
Are you trying to install the router.
You can do it manually without the CD.
MAke sure that your computer is able to go online through the modem.
If your computer is able to go online through the modem
Then you need to connect the computer to the router ad the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions
Posted on Jan 13, 2010
Tips for a great answer:
Sep 05, 2011 | Belkin N Wireless Modem-Router F5D8633au4A
All Belkin Router's ship without an admin password. If you require an admin password then follow the below instructions.
Click "Apply Changes". Your new password is now active.
Note: Do not forget the new password and keep it somewhere safe. If you forget your password, you'll be unable to access your router's settings. If you forget or lose your password, you'll need to "Perform a hardware reset on the router". This will reset the password to its default, as well as erase any and all other settings you may have changed
Configure Wireless Security on Belkin Router - Enable WPA and WEP Why should we setup wireless Security on Belkin Wireless Router ?
After configuring your Belkin router you should secure your wireless network using proper wireless encryption. It can keep wireless hackers away from your wireless network and the unwanted sharing of your Internet connection. In order to know how to login and configure your Belkin wireless router click on the link below.
How to Setup Belkin Wireless Router
Setup Wireless Security in Belkin Wireless Router
Now I hope you just followed the steps mentioned in the above link and log in to your Belkin Wireless Router. In order to enable wireless security on your Belkin router click on Security Under wireless. ( Security tab present on the left side of Belkin configuration page).
You can select either WEP or WPA to secure your Belkin Wireless network. To know more about WPA and WEP click on the link below.
Which is better WEP or WPA on your Wireless network
Enable WEP in Belkin Wireless Router
To select WEP for your Belkin wireless network ,click on security mode drop menu and select WEP. WEP is of two kinds WEP 64 bit encryption and WEP 128 bit wireless encryption. You can type your PassPhrase and generate instant wireless key for your Belkin wireless network.
After generating the wireless key, you should save settings by click on Apply changes. Now onwards to login to your Belkin wireless network, you need this wireless key.
Enable WPA in Belkin Wireless Router
WPA is more secure than WEP. To enable WPA on your Belkin router, select WPA from security mode drop down menu.
You should enter a pre-shared key to enable WPA security on your Router. Don't forget to save this WPA settings.
Aug 28, 2011 | Computers & Internet
Apr 02, 2011 | Belkin Basic Wireless Router
Nov 15, 2009 | Gateway Belkin 54g Wireless DSL/Cable...
Oct 28, 2009 | Gateway Belkin 54g Wireless DSL/Cable...
Oct 26, 2009 | Belkin (F5D7231-4) Wireless Router
Sep 23, 2009 | Belkin N1 Wireless USB 2.0 Network Adapter...
Mar 23, 2009 | Belkin (F5D7230-4) Router (587009)
Aug 10, 2008 | Belkin Wireless G Plus MIMO (F5D9230-4)...
393 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: