Question about Computers & Internet

1 Answer

I hav an acer aspire 4720z laptop ..... which is

I hav an acer aspire 4720z laptop ..... which is in SATA IDE MODE NETWORK DRIVE ENABLED AND BOOT SEQUENCE IS HDD THEN CD ROM whenever i try to reinstall my o/s a error comes up pxe-e61 media test failure check cable

IF I SET DRIVE sata achi mode then at booting error comes up pxe-e53 no boot filename received

ihav tried to change the booting sequence to cd first but it doesn't help....

the o/s im using works fine in other computers but not in my laptop.. all music cd can play in my drive so the cd drive is also fine

i want to install a new op but these boot error comes up

wat to do plzz helpp


WAITING FOR A CORRECT N GENIUNE ANSWER

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 233 Answers

I think there is a problem on the hard drive, you should formatting the hard disk using a third party, I usually use Hiren's BootCD that will be found at this link. you will download the file *. iso than burn to a CD, now try to boot from cd rom with that cd inside. later you will see some options there reply from the CD, choose partition magic. from here you will understand what to do next reply. may be useful.

Posted on Dec 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I take a working SATA ACER notebook HD and put it in an ACER with 44 pin IDE?


Just check whether your hard disk is in good condition., what is the health percentage., It has any bad sector or weak sector,. before changing.,..(because if u use convertor it should work)
use harddiskscential for performance of your hard disk
SATA to IDE adapters any good
http://www.hdsentinel.com/ SATA to IDE Adapter Drive Not Detected in BIOS

Jun 05, 2015 | Acer Computers & Internet

1 Answer

No bootable device for acer aspire 4730zg


1.FIRST YOU DO ONE THING IF YOU USING XP OS MEANS CHANGE THE SATA MODE TO IDE OTHER WISE CHANGE THE SATA MODE TO AICH.
2.IF BOOT WITH CD MEANS CHANGE BOOT PRIORITY CD/DVD ROM
2.IF YOU BOOT WITH HDD MEANS CHOOSE HDD.
BIOS OPTION----RESTART YOUR SYSTEM AND THEN CONTINUOSLY PRESS F2 KEY.

Nov 17, 2010 | Acer Aspire 4730-4947 Notebook

2 Answers

My acer aspire 5315 always show boot prepare os. When i want to install windows it cannot show cd boot (booting from cd/dvd) so i can't install windows. what is the solution sir? thank.


Restart you computer then hit F2 for Boot Bios Setting then GO TO Advance. Change the SATA Mode . ACHE. ot IDE. or Comfatibility.. then enable the F12 boot. make in enable. the hit F10 for save and exit...

Insert you cd os Installer then hit F12 for **** menu. select the CDROOM for boot....

Dec 30, 2009 | Acer Aspire 5315 Notebook

1 Answer

My acer 9301 has a SATA Hard drive should it be IDE


It is ok if it is sata, what you have to do is go to the setup or bios (press f2 or del or f10 during start up, it depends to the brand, etc) and look for the Legacy ATA option (or legacy sata) and enable it, or it may say ATA (SATA) mode and change it to legacy, that will make windows to detect your hard drive.

Mar 28, 2009 | Acer Computers & Internet

1 Answer

Laptop not working


enter in bios ,check weather your hard disk is descibed in drive information, if any hard disk is present ,then ok,else need to check hard disk
If hard disk is there then please check in setting related to hard disk that ide mode :- it should be IDE Compatible not the sata one

Mar 14, 2009 | Acer Aspire 9500 Notebook

2 Answers

RHEL %


change HDD mode in bios setup and try.
it seems that RHEL is not supporting your SATA hardisk.

Aug 01, 2008 | Acer Aspire 5610-4648 Notebook

4 Answers

Cannot install Windows XP Professional on Acer Aspire 4720Z Laptop


You have to integrate the SATA AHCI driver to your windows XP CD. By doing this you will be able to install the OS. The process of integration is given in the link below:
http://techrena.blogspot.com/2008/10/how-to-install-your-own-wndows-xp-in-hp.html
They have given a detailed description in the site.Hope this will work.

May 15, 2008 | Acer Aspire 5610-4648 Notebook

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

4,818 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...