Question about Sony KP-51HW40 51" Rear Projection Television

1 Answer

KB-51HW40 blur with different colors layers

I have Sony KB-51HW40 TV
The picture turn to be blur with 3 different color layer. It is display normal after few hours after turn ON.

If you know what the problem is, Please let me know how to fix it by myself.

Thanks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 108 Answers

Its called the Convergence. Its likely a device on one of the main control boards is failing. these are a common issue on the projector tv's usualy it will be a whole board replacment, OR componnt level trace and replace. This is something unless you are familiar doing can be quite hazardous. If your not sure get a local shop to give a free estimate, all my projection tv's have done this with time, you can even go into the menus and realign it through tv settings, but sometimes they will start to wander out again.

Posted on Nov 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Picture tube


yap! for CRT TVs with ring of colors, do the following to solve the problem; find a normal magnet from a retired speaker , just switch on the TV and while the TV is On, hold the magnet about 15CM from the screen while moving it arround the whole screen area. when it starts to degause/to be clear just move the magnet around the screen while moving further away from the TV screen let say 20CM, 25CM , 35 cm etc.

Nov 08, 2013 | Televison & Video

1 Answer

How to mix two images ? specially at border of picture.


1. Open the first image.
2. Open the image you want to merge or mix with the first image or border.
3. Press Ctrl + A to select the entire image.
4. Press Ctrl + C to copy the selected image.
5. Click in the title bar of the image you opened first.
6. Press Ctrl + V to paste the second image over the first image.
7. If the Layer window is not displayed press theF7 function on your keyboard.
8. Make sure the top layer is highlighted or click on the layer to highlight it.
You should see the border around the image. If you want to hide part of the top image at the bottom lower left of the layer window you will see rectangle with circle which displays add layer mask when you hover the mouse cursor over it. Hold the Alt key and click on the Add Layer Mask Icon. This will hide the top image until you select the brush with a white color and paint the layer mask layer. The Layer Mask is the black rectangle next to the layer image which must have the white rectangle around it when painting with the brush. If you do not see the top image mixing with the bottom image make sure the black rectangle is selected or click on the black rectangle to select it. If the layered image is selected you will be painting it white and alter the image. If you revile part of the image when painting the mask you can hide it by changing the brush color to black and painting the reviled layer to hide it again. Layer masks are very powerful which you will need to look up in the help files for more information to gain full power of the tool.

Jan 20, 2010 | Adobe Photoshop 7.0 for PC

1 Answer

The picture looks blurred.


in the menu screen, there is an option where you can re align the colors, by adjusting cross hairs

Mar 22, 2009 | Sony KP-53S35 53" Rear Projection...

1 Answer

Smoke


dude,follow these steps and u will make it.

1)first, make a new layer and set your foreground color to a light tone of grey which suits the color of smoke and the background color to black to have a stark contrast.

2)make ur foreground color active.press alt + backspace on the keyboard by making sure the new layer is active.

3)go to the filters menu and choose noise>add noise.

4)play around with the noise values until u have a clear contrast in the add noise area.

5)click ok, and go back to the filter menu, blur>motion blur. increase the value just slightly.

6)now, u will have a kind of a rainy effect.all u have to do now is to go to filter menu>liquify and choose a slightly medium sized brush and warp the layer to ur heart's content until u get a shape of the smoke. At this stage, it looks somewhat like smoke, but to add more reality, reduce the opacity values slightly to see the real effect of a smoke.

7)if u want to see the smoke more clearly, just adjust the levels in the levels command.enjoy!!

7)thank you! If you have further doubts, please make sure u post a question, we are here to help u!!!!!!

Jun 14, 2008 | Adobe Photoshop CS2 for PC

1 Answer

Photoshop, separating gray shades


I'd select the different levels of gray, and cut the color out of the picture, then paste it into a new document, using the exact same document and canvas sizes each time, so that you end up with three or four new documents, each with a different level of grey. If you're familiar enough with PS, you can do so by adding four new layers, and simply copy and paste the colors to four separate layers, and just hide all layers except the one you're printing currently. PS will ignore all layers that are invisible when printing. Click the 'eye' icon on each layer so that all of them are hidden except the one you want to print.

Hope this will FixYa!!!

Jun 01, 2008 | Adobe FC Photoshop CS V8.0 for mac

1 Answer

Picture color


more then likely it could be your blue tube is bad.

Apr 27, 2008 | Sony KP-51HW40 51" Rear Projection...

1 Answer

Blurred figures and no color convergence when hitting the flash button to clear up picture


convergence ICs have failed. Heres a link where you can get replacements with free step by step instructions so you can do the repair yourself and save alot of money. The parts are inexspensive.
http://servicemanuals.vstore.ca/

Apr 05, 2008 | Sony KP-51HW40 51" Rear Projection...

1 Answer

Photoshop: how do I turn a color pic to sepia and leave certain part in color?


well i can suggest a very simple solution for problem. Follow the video to create a sepia http://video.about.com/graphicssoft/Sepia-tone-look-in-photoshop.htm
after that merge all the layers. Now add the original picture in you work and place it at the back of the Sepia Layer. Carefully erase the flower in the Sepia Layer and as you do this the flower from the original picture will show its original colors.

Please Rate Thanks

Jan 06, 2008 | Adobe Photoshop 7.0 (321115627)

Not finding what you are looking for?
Sony KP-51HW40 51" Rear Projection Television Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74185 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...