Question about Hotpoint Aquarius WD640 Front Load Washer/Dryer

2 Answers

Hot point WD440 wash/dry :How to put tumble spin off.

Many thanks in advance. I recent bought Hot Point WD440. when i did the first wash, set to fast wash. I was shocked to see such noisy and tumble spin, my whole kitchen started shaking and cupboard above it was shaking as if the whole house is tumbling. Can anyone guide me to put off the tumble wash setting off.
I promise in future, i wont set this tumble stuff on again.
Thanks & appreciated

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers
Re: Hot point WD440 wash/dry :How to put tumble spin...

I know this may sound stupid but did you follow the instructions on removing the Transit Braket? with tht un removed it will cause the machine to "Dance" around the room

Posted on Jan 30, 2008

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers
Re: Hot point WD440 wash/dry :How to put tumble spin...

Could be that the clothes are unbalanced in the machine as well, next time, try a full load and see if ti helps. good luck.

Posted on Jun 29, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I dry only

When using the WD-1000 as a Dryer only, are you turning the rightmost knob Clockwise to the correct starting point?
Looking at the periphery of the knob, at the bottom, see the elongated "sausage" shape, outlined in blue? Turn the knob so it passes "Stop", and points there.
At the end of a completed Wash Cycle, that is where the pointer will be pointing. Once there, the machine switches automatically to Dryer Mode.
As long as the middle dial is set to a timer length greater than zero, the drying begins. I recommend turning the middle dial to somewhere around 2:00 o'clock, which corresponds to about 90 minutes if I remember correctly.
(You'll notice that is in the "Orange" area, meaning Full Heat - which is always fine because it never gets too hot anyway)

So, turn right dial to point to the "white sausage" at the bottom of the dial; Turn middle dial to 90 mins, or so; (Left dial only controls "Spin" speed - just set to max); and close the door. (It should begin drying)

Feb 14, 2015 | Malber WD1000 Front Load Washer/Dryer

1 Answer

No cold water,only hot

Good Afternoon Leonard, thank you for your inquiry! If the washer was recently installed or moved to a different location, confirm that the hoses are connected correctly. Otherwise, the unit may be experiencing a communication issue with the control not responding accordingly or have a faulty water valve. At this point, I would recommend having a service technician to diagnose the problem before investing in unnecessary parts. Experienced techs also usually warranty their labor just in case something else is the root cause of your initial problem.

Aug 27, 2013 | Frigidaire 14 Cycle Tumble Action Washer

1 Answer

Hot point wd64 dryer

U need to check the heater element and/or the stats on the top of the heater box located on the top of the drum for continuity, with a meter.
Disconnect from the supply, and remove wires from components to check for continuity.
Hope this helps u.
Plz rate this solution.

Dec 30, 2008 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Not drying

the steam gets condensed back to water and pumped away so sometimes draining problems cause poor drying. is the machine plumbed in according to handbook?
also your dryer filter may be blocked but this is not accesable without the dryer box being stripped down.

Nov 05, 2008 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Clothes wont dry but gets really hot

make sure your exhaust line is clear and not kinked

Oct 24, 2008 | Washing Machines

1 Answer

Washing machine wfm 2010 not rotate just fill and drain water

sounds like the carbon brushes in motor,Or motor has had it.

Oct 11, 2008 | Bosch Washing Machines

1 Answer

Hotpoint wd440 heating but not drying

yes, the dryer is pants im afraid. weve had ours going on 4 years & it has broke down every 6-10months - seriously! the dryer will leave clothes hot & steamy but when hung up for 1/4hr they r dry! _ Hotpoint advised us that he machine is esigned his way - but dont believe a word from their corporate b***hit mouths!

Aug 11, 2008 | Hotpoint Aquarius WD640 Front Load...

2 Answers

Aquarius Hotpoint WD440. 1400 Spin

The next step should be the pump out. If it is not pumping check your pump filter for obstructions. Check the drain hose and also your drain in the wall. If all are clear you may have a bad pump. You should have an error code coming up when the machine stops also, please let me know what it is. Thanks and I hope I can FixYa.

May 09, 2008 | Hotpoint Aquarius WD640 Front Load...

2 Answers

WD440 drying high heat and 0n/off light flashing

Just had the exact same problem and think I may have solved it. even turning power off didn't solve it. I think what happened was that the programme had been interupted while drying. I tried everything to get machine to work afterwards but only the following worked - while lights are flashing put back to the same time I had set to dry (60) in my case and turned the dial to M for dry high heat light goes off after a short while - leave for 5 mins then press off. machine will make a noise for a short while then stop.
If this happens then machine should be back to normal.
this is same for both posts I guess.

Feb 03, 2008 | Hotpoint Aquarius WD640 Front Load...

Not finding what you are looking for?
Hotpoint Aquarius WD640 Front Load Washer/Dryer Logo

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts


Level 1 Expert

5 Answers


Level 1 Expert

47 Answers


Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides