Question about Televison & Video

1 Answer

I have a Samsung DVD 1080P8 that won't work at all suddenly.

Posted by on

  • lotusleila Nov 15, 2009

    I have a Samsung DVD player, model DVD 1080P8, not working. It's not a TV.
    Thank you,
    Leila Martin


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 448 Answers

If you're talking about a Samsung TV that is not working at all then check whether the TV is getting power by connecting the power cord of the TV to a different wall outlet.
Try pressing the power button on the TV to turn it ON. Disconnect the power cord of the TV from any surge protector, if any, and connect it directly to a functional wall outlet.
Furthermore, press and hold the power button on the TV for 30 seconds. If the TV doesn't respond at all by performing all the above mentioned steps then the power board requires to be serviced.

Posted on Nov 15, 2009

  • Rahul Prashant Singh Nov 16, 2009

    Check if the the DVD Player is powering ON. Disconnect the power cables of the DVD player and all other connecting cables from the devices.

    Next, reconnect the DVD player after 10 minutes and reset it to the factory default settings and try to use it.


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Samsung DVD 1088 remote

take the batteries out for 15 minutes.

Apr 20, 2014 | Samsung DVD-1080P8/XEU DVD Player

1 Answer

I burned a video to a CD-R and it wont play in my DVD player

You probably burned an AVI file to disk using Image Burn or some program like that. Your DVD is probably older and won't accept anything but a true DVD. Buy a $30 player that's approved for DVD-R, XVID, MP3, etc.

Apr 05, 2010 | Samsung DVD-1080P8/XEU DVD Player

1 Answer

I want to play region 2 dvds on a region 1 player.

Try this website - and look in the DVD hacks section - I'm sure you may find what you are looking for!

Aug 29, 2009 | Samsung DVD-1080P8/XEU DVD Player

1 Answer

How to wire a dvd player for sound

HMDI to video 1 or 2 or component

Aug 17, 2009 | Samsung DVD-1080P8/XEU DVD Player

1 Answer


You may have accidentally activated the reset on the unit. This is done when you hold down the FFW button on the front of the unit without any disc inside.

All you need to do is turn off the unit and turn it back on. If the word RESET still appears, get the remote control and press 1. It should work fine after that.

May 17, 2009 | Samsung DVD-1080P8/XEU DVD Player

1 Answer

How to change region codes from only 4 to 2 & 4

1) Turn on the player with no disc in the tray
2) Press the Open/Close button to open the tray
3) Press the info button, the firmware version shows up (mine was 080220.13.B.1080PXKEG)
4) After the version info disappears, close the tray again by pressing the Open/Close button
5) At this point, it will show "no disc" at the top. Press the Info button again, and this will disappear.
6) Now type the code that applies for your region (R4 is 76884). A '4' will briefly show up at the top left corner
7) Now press 9, and 9 will show up in the top left corner
8) Power off the player, and turn it on again. You'll have a multi region player


Apr 18, 2009 | Samsung DVD-1080P8/XEU DVD Player

1 Answer

Problem hooking dvd-1080p8 to 22inch 720p RCA TV LCD HD .

I changed the output on the Dvd player to720p and that seemed to cure the signal problem,that is what the TV is,so that makes sense,I had already assumed that would do the trick.However,as I said yesterday,the manual states it only upgrades the signal in 1080p,I went by the deacription on the box which said it was compatible with all 3 signals.So after all of that I am not sure if it is going to upgrade the signal to 720p,if you have the answer I would appreciate knowing,I can certainly live with this .but it would be nice to know.

Dec 27, 2008 | Samsung DVD-1080P8/XEU DVD Player

2 Answers

Want ot unlock the regional codes on a samsung dvd 1080P8

try this link

Oct 15, 2008 | Televison & Video

1 Answer

Unlocking samsung dvd-1080p8

i need to know how to unlock a dvd samsung 1080P8

Jun 23, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Cindy Wells

Level 3 Expert

5105 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides