Question about Cyberhome CH-DVD 300 DVD Player

1 Answer

Holding the Reset button for 60 seconds didnt help!!!!!!

I wud like to reset to factory settings!!!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Holding the Reset button for 60 seconds didnt...

Unlike the suggested solution to reset to factory settings by pressing the stop button on the DVD player itself with the tray OPEN, in my case I succeeded only with the tray CLOSED (no DVD inside). The light flashed to red e back to green and it was done.

Posted on Jan 10, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Factory reset

Use Default Settings If you want to return the initial language setting such as Language, Video, Audio and etc. to the factory default, do the following: 1) Press SETUP button. 2) Press / button to select Misc. 3) Press button to select Use Default Settings, then press ENTER button. 4) Press / button to select "Yes", then press ENTER button. The original setting will be restored. Screen saver : On Do you want to use default setting? Note When you reset the DVD player to the factory default, the DVD player will take 3-5 seconds to reset.

Oct 15, 2014 | Toshiba SDK990 Player

1 Answer


You don't say what you have, but it looks like a DVD player from the picture. It should have a reset button in the back or bottom. Just like a modem router for your internet does. On them, if you lose your password and reset it, it goes back to the way it was from the factory.

Jul 23, 2010 | Mintek DVD-2580 DVD Player

2 Answers

I have a Sony RDR-VX560 DVD Recorder / VCR Combo, accidentally put it to dvd1 instead of dvd3...ive tried holding the enter button and all that and nothin works..any way to get factory reset or any help?

Hold down Enter button on remote and while holding Enter press and hold 1 (numeric) on remote for 3 or 4 seconds, now remote is set on dvd1 mode and dvd recorder will accept its commands.

Mar 19, 2010 | Sony RDR-VX560 DVD Recorder/VCR

1 Answer

Help with resetting screen reselution

Try Unplugging And Holding The Power On/Off Button For 30 Seconds Then Plug It Back In

Jan 12, 2009 | JVC DVD & Blu-Ray Players

2 Answers

Stuck in 'set 1'

Had this same problem and found the solution elsewhere on the net. Hold down the "1" button and the "Enter" button for aprox 10 seconds while pointing at the player. This "resets" the remote. I was skeptical when I first read this solution but it worked for me!

Jan 16, 2008 | Panasonic DMR-ES10 DVD Recorder

2 Answers

DVD player

try to reset it to factory settings.

Jan 11, 2008 | Cyberhome CH-DVD 300 DVD Player

5 Answers

Blank Screen

There is an error in the manual. In order to reset to factory defaults, turn on (with no disc inside), DO NOT OPEN THE DISC TRAY, just press the stop button on the player for 5 seconds (some solutions say 20 seconds).

Aug 16, 2007 | Cyberhome CH-DVD 300 DVD Player

9 Answers

Unable to change the DVD 1 Command Mode back to DVD 3 (DEFAULT) SETTING

Had the same problem when I changed the factory settings by mistake. There is no "cancel" button in the remote or the set. What worked for me was to follow the directions on P. 22 of the manual and change the remote settings to DVD 1. This is done by holding the "Enter" button and pressing number 1 on the keypad simultaneously for more than 5 seconds. Then, you go back to the "Settings" screen with the "Settings" button, change the control back to DVD 3, and reverse the setting in the remote by pressing "Enter" and the number 3 this time. Remember to hold them down more than 5 seconds. Good luck!

Aug 02, 2007 | Sony RDR-VX555

1 Answer

DMR-ES30V remote and DVD panel buttons not responding

I assume you have fixed this by now, but if not, call panasonic's help line (number is in your owner's manual). They will walk you through the complete reset process (maybe 5 minutes). you will have to re-program everything the same as you did when it first came out of the box, but that doesn't take too long. Also, first try taking the batteries out of the remote. Make sure they are still good. Wait 60 seconds or longer, then replace batteries.

Jul 23, 2007 | Panasonic DMR-ES30VS DVD Recorder/VCR

Not finding what you are looking for?
Cyberhome CH-DVD 300 DVD Player Logo

Related Topics:

1,454 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cyberhome DVD & Blu-Ray Players Experts


Level 1 Expert

48 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5327 Answers

Are you a Cyberhome DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides