Question about Zenith IQB50M90W 50" Rear Projection Television

1 Answer

Zenith PV4663RK TV works well, but I have no operators manual. Screen is 45" corner to corner. I've managed to figure out all but the PIP function. I can call up the PIP screen and move it all over. I cannot figure out how to set the PIP to a channel other than the one I happen to be watching. Any suggestions will be appreciated.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 135 Answers

See the solution here.

Posted on Jan 09, 2008

  • Yonatan Horan Jan 09, 2008

    In case someone else who doesn't have access to the premium question wants to see the solution:

    Are you connected to cable TV using a digital receiver? If
    so, your TV can only get the signal for one channel - the one you're
    tuned into on your receiver. A workaround is to connect the coax cable
    TV cable directly to your TV, as well as connecting your receiver to
    your TV. This will allow you to be able to change the channel on your
    receiver and be able to change the channel on your TV to one of the
    analog channels you can tune into by connecting the coax cable directly
    to the TV.

    For more information, see this post which explains it all.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Picture inside a picture on my TV screen


The PIP (picture-in-picture) setting can easily be reversed if you look on your tv for the PIP button or for the same button on your remote. If neither of these works then you may want to check your TV's operation manual for the PIP setting .

Nov 26, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

2 Answers

Can't remove blue PIP (?) section in lower RH corner


I have the Olevia TV with RC-LTU remote, To get rid of PIP just press the (VIEW) button twice.

Nov 13, 2008 | Olevia LT37HVS 37 in. LCD HDTV

1 Answer

PIP change


you can change the channel of the small screen .just read the user manual of your tv.to your problem is only in the remote control

Oct 13, 2008 | Zenith Z32X31D 32" TV

1 Answer

Pip for my iQB36B44w


The PIP may only work with an external tuner or source (VCR, DVD, CATV box, etc) If your TV doesnt say "dual tuner" then you need an external source for the PIP (Use a VCR and its tuner for instance)

Feb 13, 2008 | Zenith B27A11Z 27" TV

1 Answer

Zenith PV4663RK Rear Projection TV - Manufactured - Mar. 1995


Hi,

Are you connected to cable TV using a digital receiver? If so, your TV can only get the signal for one channel - the one you're tuned into on your receiver. A workaround is to connect the coax cable TV cable directly to your TV, as well as connecting your receiver to your TV. This will allow you to be able to change the channel on your receiver and be able to change the channel on your TV to one of the analog channels you can tune into by connecting the coax cable directly to the TV.

Jan 09, 2008 | Zenith IQB50M90W 50" Rear Projection...

1 Answer

Hitachi ultravision


PIP requires split signal source or two signal sources....
With cable, you can split before source box ,with satellite you
can't.....consult owner manual........T.

Dec 13, 2007 | Televison & Video

1 Answer

Need help with PIP


When you go into the menu to choose the PIP source the PIP comes on to confirm that a valid source has been selected. It is normal for the PIP to close when the menu is exited. To display the PIP normally you will need a remote with a PIP button. Most universal remotes today have PIP functions but if you get a Zenith original replacement then you are guaranteed to enjoy the other PIP features such as size, position, freeze and swap.

Jul 25, 2007 | Zenith Z36X31D TV

Not finding what you are looking for?
Zenith IQB50M90W 50" Rear Projection Television Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

matt martin
matt martin

Level 3 Expert

1230 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...