Question about Kenmore Oasis HE 27082 Top Load Washer

1 Answer

When I turn on the power button, the signal button keeps beeping and going back and forth between the on and off. No other buttons will work. The wash will not start.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

It appears your timer/main controller/CCU has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question%$#@

Posted on Sep 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brought a second hand ps3 slim 160gb.when everything is on tv says no signal i hold button down but no beeps light goes from green to red anybody help please


Try this Make sure no game in ps3 turn ps3 off and by the switch at the back unplug it wait a couple of sec then plug it back in turn on buy the switch at the back then hold down power and eject hear a beep keep both preseec till 2nd beep let go should be able set it to ya tv

Dec 28, 2013 | Sony Playstation 3 (PS3) Console

1 Answer

Had the ps3 working fine, plugged it into another tv and nothing, the tv wont pick up the signal.. went to plug it back into the 1st tv and still nothing


Try resetting the display back to standard definition -

Turn the PS3 off into standby (red light on)
Press and hold the power button. It will beep when you first press it, then beep again 5 seconds later. Let go of the power button when you hear this second beep

Wait for the PS3 display to reset

Hope this helps

Oct 26, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

Someone accidently locked the chair now when you press the power button the light flash back and forth for about ten seconds then beeps and will not turn on.. what do i need to do?


I'm not 100% sure but I think if you push the ON button and keep your finger on it and at the same time press the horn button it may unlock it. Not all models are the same but its worth a try. Good Luck

Jun 29, 2010 | Electric Mobility Invacare Pronto M41...

3 Answers

My unit shut off now displays E1.


Sharp updated the procedure for resetting the E1 code.

1. unplug unit
2. hold the Power button while plugging the unit back in
3. keep holding the Power button until the unit beeps
4. unplug unit again
5. plug it back in and it should be good

Here is the updated user manual

http://www.sharpusa.com/downloads/archives/product_manuals/air_man_AFS100FX_S120FX_S125FX_R100FX_R120FX.pdf

Jun 05, 2010 | Sharp AF-S120FX Air Conditioner

1 Answer

It is beeping "Error" with 5 beeps


5 beep error means that the waste ink tank is full. You can reset the counter to make it print by doing the following: You have to be exact. If you make a mistake in any of it, just go back to the beginning and start it all over.

1.Unplug the power cord from the printer

2.Hold down BOTH the POWER and RESUME button at the same time and then plug the power cord back in. Keep holding down the buttons until the printer finishes its powering up noises.

3.After the printer is quiet, release the POWER and RESUME buttons. Then hold down the RESUME and CARTRIDGE buttons at the same time with one hand, and press the POWER button with the other. KEEP HOLDING DOWN the RESUME and CARTRIDGE buttons until you hear 2 beeps. They will come quickly together and one beep will be longer than the other. Listen carefully, as they are not very loud.

4. Once you hear the 2 beeps, release both buttons.

5. After both buttons have been released, then press the CARTRIDGE button 15 times. You will hear a beep each time it's pressed.

6. After you finish pressing the cartridge button 15 times, then press the RESUME button one time. The printer will beep and shut off.

7. Turn the printer back on by pressing the POWER button. The printer will work fine now. The waste ink will have been reset to 50% full.

Sep 29, 2009 | Canon BJC-85 InkJet Printer

1 Answer

When I turn on my ps3 system on, there is no signal on my T.V.


With the system off, hold down the power button on your PS3 for 10 seconds. This should set everything back to factory defaults. If that doesn't work, try holding it down until you hear the beep that sounds when the system turns on. Keep it held until you hear 2 more beeps, and release it instantly. If it doesn't work after that, then its going to be a problem with either the power supply, meaning that its missing some off the voltages which powers on the system properly or the main board is bad, at that point you would have to call Sony Tech Support.

Aug 27, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

Av connections not giving signal to tv on PS3.


Turn the power off on the switch on the back, and then back on again. Hold down the power button, keep on holding it down after the first beep, but let go once another couple of beeps sound. It should then take at max a minute but then it should show a screen set up section.

Apr 12, 2009 | Sony Playstation 3 (PS3) Console

5 Answers

PS3 Problem... I turned on my ps3 but nothing shows up on the television screen and controls wont even detect... PS3 shows that it is receiving power because the power light on ps3 is green. Can someone...


Turn the power off on the switch on the back, and then back on again. Hold down the power button, keep on holding it down after the first beep, but let go once another couple of beeps sound. It should then take at max a minute but then it should show a screen set up section.

Apr 09, 2009 | Sony Playstation 3 (PS3) Console

Not finding what you are looking for?
Kenmore Oasis HE 27082 Top Load Washer Logo

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2180 Answers

fordexpert

Level 3 Expert

5520 Answers

Mike Squire

Level 2 Expert

402 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...