Question about McCulloch Garden

1 Answer

Need to remove & replace primer bulb on mcculloch mac 3516

Need to remove & replace mcculloch mac 3516 primer bulb, could use an exploded parts view to see how it comes apart.

Posted by on

  • JERRY ABELL
    JERRY ABELL May 11, 2010

    hello sir, to get your manual and parts for your McCulloch chain saw,. trimmers,power washers, you need to call 1-800-521-8559, ask for parts, than ask for a PDF user manual,you will need the model number of the saw, or trimmer, to be e - mailed to you for FREE. hope this helps,MrFixIt,oh could you please rate this solution,thank you$$$

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,220 Answers

There are 4 different IPLs for this saw. Fuel detail are on multiple illustrations.
http://www.ordertree.com/modelinfo/MCC/22-600035-18-Mac-3516-IPL-211318-01/139.22-600035-18-Mac-3516-IPL-211318-01.1.59.1.html
A helpful video, a few of my suggestions, and a schematic follow:
Fuel Line Replacement by SmallEng.com
http://www.youtube.com/watch?v=JrXpU70Hmi0

  • The hose in the tank with the filter on the free end connects directly to the carburetor input connection.
  • If the saw is equipped with a primer bulb, an output line from the carburetor connects to the suction side of the primer (once the bulb is collapsed it draws fuel from the tank through the carburetor to refill as it inflates).
  • The pressure side of the primer returns displaced fuel to the tank as it is depressed.
Take lots of notes and a few digital photographs to help with reassembly.
Need to remove & replace primer bulb on mccull - ad6523f.gif
HTH
Lou

Posted on Nov 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you get to the oil filter and how do you clean it and change it.


How to clean the chainsaw's air filter - YouTube

? 3:11
https://www.youtube.com/watch?v=wozSufvtbfE
May 30, 2012 - Uploaded by iScaper1
Tips for removing and cleaning the air filter on a Stihl MS250chainsaw. ... A very dirty air cleaner, a little maintenance can help them live longer ... Poulan Chainsaw Review- Should youbuy one? ... chainsawbars.co.uk - cleaning the air filter andchanging spark plug ... Get video URL at current time.

Mac 3200 chainsaw oil tank repair - YouTube

? 3:21
https://www.youtube.com/watch?v=XXlm-o8sD6A
Jul 17, 2012 - Uploaded by conan6868
Repairing oil tank. ... Could You Fix This Mini Mac Chain Saw! ...The chainsaw guy takes the McCulloch Mini Mac ChainsawChallenge 9 23.
Mucculloch 3516 chain saw assembly - YouTube? 49:25https://www.youtube.com/watch?v=Xm4YL3pDG8cJan 20, 2014 - Uploaded by Dragracer64In this video I take a box of dirty chain saw parts that has been sitting in my attic for about 12 ... Is there supposed to be a filteron the line in the chain oil tank? .... How to replace MCCULLOCH chainsaw MAC 3516 fuel line.How to replace MCCULLOCH chainsaw MAC 3516 fuel line ...? 1:32https://www.youtube.com/watch?v=GMjXYKza-NYJan 13, 2013 - Uploaded by Lambda ITCMCCULLOCH chain saw MAC 3516 chainsaw fuel line replacement. Three fuel lines. 1) First line in the tank ...

Dec 27, 2015 | McCulloch Garden

1 Answer

How to replace the fuel primer bulb and fuel lines in McCulloch 3516 chainsaw? the fuel primer bulb broke and the plastic lines have crumbled. i need to know how to run the lines from the fuel tank to...


I just did a primer bulb not too long ago, but I don't remember what equipment it was on. They are generally easy to replace. First, remove anything that is retaining the bulb assembly, such as cover plate. On my Homelite chainsaw, I simply pried it out with a small screwdriver.
The replacement part itself has two barbed stubs that the two fuel line hoses push onto.
Make sure that you keep the fuel line tubes above the fuel level at all times to prevent leakage.

Dec 05, 2010 | McCulloch 16 Inch Gas Chain Saw MCC1635AK

1 Answer

I have a MAC 3200 chain saw. The primer bulb has split and needs to be replaced. Can you help with a part number and where to buy? I found this: McCulloch Part Primer Bulb 224242Will that work for...


Howdy Ben;
If the model number is 11-600032-32 and I think it is that is the correct primer, pn 224242-02. OrderTree says NLA. It is available through an "arinet" dealer.

I found one at M&D Mower
http://www.m-and-d.com/index.html?id=o8T9mnhG
$3.96 plus shipping and handling.

If you have more questions or need additional help please reply below and I will get back to you. HTH & Good Luck.
Lou
Thank You for using FixYa.

May 10, 2010 | McCulloch Garden

1 Answer

Need to view gas line hook up. On mac3515 chainsaw


No 3515(35cc,15"bar)s a 3516 is provided.
A McCulloch Mac 3516 model model 21-600035-59. (may not be your saw):
http://www.ordertree.com/modelinfo/MCC/21-600035-59-Mac-3516-IPL-211318-01/139.21-600035-59-Mac-3516-IPL-211318-01.1.59.1.html
The IPL (exploded parts list) for your saw is the only detail for fuel line routing and it is sketchy at best; components are listed but may be on different illustrations.

If the above is not your saw, yours can be located here:
McCulloch IPLs
http://www.ordertree.com/modelinfo/McCulloch/139.59.html

A typical fuel system and a couple of tips follow:
http://www.fixya.com/support/r3706813-2_cycle_fuel_system_repair
If properly plumbed your saw will run with the carburetor to primer hose capped off.
If you have more questions or need additional help please reply below and I will get back to you. Thank you for using FixYa and Good Luck. HTH
Lou

Mar 14, 2010 | McCulloch 10" Electric Pole / Chain Saw

1 Answer

How to run the fuel hoses for the MAC 3516. Most of the hoses have fallen apart so retracing the hoses is problematic


A McCulloch Mac 3516 model 21-600032-83 IPL example follows (may not be your saw):
The IPL (exploded parts list) for your saw is the only detail for fuel line routing and it is sketchy at best; components are listed but may be on different illustrations.
http://www.ordertree.com/modelinfo/MCC/22-600032-83-Mac-3216-IPL-211229-01/139.22-600032-83-Mac-3216-IPL-211229-01.1.59.1.html

If the above is not your saw, yours can be located here:
McCulloch IPLs
http://www.ordertree.com/modelinfo/McCulloch/139.59.html

A typical fuel system and a couple of tips follow:
http://www.fixya.com/support/r3706813-_cycle_fuel_system_repair
If properly plumbed your saw will run with carb to primer hose capped off.

If you have more questions or need additional help please reply below and I will get back to you. Thank you for using FixYa and Good Luck. HTH
Lou

Mar 13, 2010 | McCulloch Garden

1 Answer

Mac 3516 b330 replaced carby diaframme


Are the fuel lines routed like this?
http://www.fixya.com/support/r3706813-2_cycle_fuel_system_repair
If yes reply below and we will scratch our heads together. HTH
Lou

Feb 20, 2010 | McCulloch Garden

3 Answers

Need fuel line schematic for mcculloch 3516 chain saw or written directions from point to point


What you request doesn't exist. Fuel system components, part numbers and some detail can be found here:
McCulloch IPLs
http://www.ordertree.com/modelinfo/MCC/11-600035-34-Mac-3516-IPL-211318-01/139.11-600035-34-Mac-3516-IPL-211318-01.1.59.1.html
View all the pages and read the parts lists. Then use the following as a guide. Be warned! most saw shops will not repair these saws.
bc99e2a.gif
Fuel Line Replacement by SmallEng.com
http://www.youtube.com/watch?v=JrXpU70Hmi0
  • The hose in the tank with the filter on the free end connects directly to the carburetor input connection.
  • If the saw is equipped with a primer bulb, the output line from the carburetor connects to the suction side of the primer (once the bulb is collapsed it draws fuel from the tank through the carburetor to refill as it inflates).
  • The pressure side of the primer returns displaced fuel to the tank as it is depressed.
Take lots of notes and a few digital photographs to help with reassembly. HTH
Lou
You have 5 times what was available just a month ago. Good Luck

Nov 10, 2009 | Garden

1 Answer

I need a primer bulb for a Mac 3516 chain saw. What part# would that be?


An IPL (Chinese Mac, exploded parts list) can be fond here:
https://www.dixiesales.com/ipl/327/Chainsaws_32cc-35cc.pdf

Once you have a part number a google search will provide a source. HTH
Lou
Please take extensive notes and a digital picture or 2.

Sep 26, 2009 | McCulloch Garden

2 Answers

Model 3516 primer bulb broken. where to get it replaced if can be.


I wish I could help. There are no parts available, there are no Exploded parts lists I've found a link to. These are Chinese chainsaws with the McCulloch name. They ARE Chinese chainsaws and I'm disappointed in Mac. Most mechanics won't touch them. We can provide no more help with this saw. Sorry I wasn't more helpful.
Lou
Poulan or Craftsman gasoline chainsaws are reasonably inexpensive, parts are available, and given a little TLC perform well.

Sep 21, 2009 | McCulloch Garden

3 Answers

I have a 3516 chain saw mod22-600035-18 Mcculloch the fuel lines


I wish I could help. There are no parts available, there are no Exploded parts lists I've found a link to. These are Chinese chainsaws with the McCulloch name. They ARE Chinese chainsaws and I'm disappointed in Mac. Most mechanics won't touch them. We can provide no more help with this saw. Sorry
Lou
Poulan or Craftsman gasoline chainsaws are reasonably inexpensive, parts are available, and given a little TLC perform well.

Jun 10, 2009 | McCulloch Garden

Not finding what you are looking for?
Garden Logo

Related Topics:

4,461 people viewed this question

Ask a Question

Usually answered in minutes!

Top McCulloch Garden Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

roeb

Level 2 Expert

259 Answers

Are you a McCulloch Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...