Question about Jenn-Air 27 in. Electric Single Wall Oven with Multi-Mode Convection

1 Answer

Display frozen Display shows 5A6 ATh Cannot reet when diconect pow display comesbackwithhis code cancel or any keys are notgiving response

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jenn-Air Master
  • 3,053 Answers

Hello, kee

I was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in the recent past and farther back, It appeared that no one answered some of them, So, I thought I would take some of my personal time to see if I can help. Even though this site may not have your exact model or brand, This link will help you tons. Here is a link to about everything you want to know about your oven, from repair to trouble shooting it. Even pictures and video's. Just scroll around and you will see tons of information to almost any question you might have on your Oven. If you go to this link and click around, I am sure you will find out so much about your oven, you will know more than the company that made it. The good thing about this link is, then you can make the decision of DIY or hiring a pro. Here Is the link for you to click on>>


http://home.howstuffworks.com/dishwasher.htm



Please if this helped you at all, if you can find the time to rate my help and some kind words written would be appreciated for my free help , I would appreciate it. Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive,Appliance, and Electronics. Drop In anytime for my help. Thanks,Mike

http://home.howstuffworks.com/how-to-repair-an-oven.htm


Please if this helped you at all, if you can find the time to rate my help and some kind words written would be appreciated for my free help , I would appreciate it.

Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive,Appliance, and Electronics. Drop In anytime for my help

Thanks,Mike



http://beta.fixya.com/users/mc1bean

Posted on Oct 28, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Displaying E6 & F2 code


F2/E6 fault code implies a Cancel key drive line open. This means the key pad ribbon connector could be loose or dirty where it connects to the oven control board or a faulty oven control board.

Press Cancel. If the error code returns after 60 seconds, replace the key pad. If it continues to display F2/E6 after replacing the key pad, replace the oven control board. The parts can be ordered from Sears PartsDirect

NOTE: Disconnect the power supply from the oven before servicing.

11_13_2011_4_09_40_pm.gif


Check additional details in THIS IMAGE LINK.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Nov 13, 2011 | Ovens

1 Answer

In trying to change clock did something wrong and now will not do anything, screen showing 5A6 6ath. what can i do to fix?model#mew5527ddb16 serial# dx2614846


power down the unit at the circuit breaker for an hour or so and see if this clears the memory,otherwise try pressing stop/cancel or any combination of these types of end buttons at the same time to cancel the error message

Jun 30, 2011 | Maytag Ovens

1 Answer

My oven will not come on and is showing the message 5A6. Could you tell me what this might be?


Hello, welcome to FixYa.

It sounds like the unit has been placed in "sabbath" mode somehow, hence the display showing the digital abbreviation for sabbath "5A6".


If you have you owners manual it should instruct you how to disable it, but if you don't have it you will need to confirm the make/brand name is a Maytag and model number and I'll see what I can find.

I'll watch for your reply and if you need anything further I'll be glad to help in any manner I can.

Regards,

Macmarkus :)

May 26, 2011 | Maytag Ovens

2 Answers

WENT TO SET CLOCK, SOMEHOW DIS-TURBED THE CONTROL BOARD, IT IS LOCKED, READS 5A6, CAN I UNLOCK IT?


Your range is probably in the Sabbath mode. The error code shown on the display is"Sab", not "5ab" or "5A6.

To disable the Sabbath mode push and hold the Clock pad for 3 seconds

Mar 13, 2011 | Ovens

1 Answer

Cannot find my manual and would like to know how to use the self-cleaning part. I held the button down for "lock", but the door did not lock, and where do I go from there?


Give this a try:
1. Verify error code by pressing and holding CANCEL/OFF key for 5 seconds. Momentarily (less than 5 sec.) press CANCEL key again to remove error code display. 2. Program and start the Clean mode. Observe to see if door locks. If it does not, inspect the locking mechanism from the solenoid to the latch pawl and door to find the cause of the problem. If the door is not locking, then 1 minute from the start of the Clean, the F5 E1 code will again be displayed. Press CANCEL key to remove error code display. 3. Once any mechanical problems with the latch mechanism have been corrected, program and start a Clean cycle (after, if necessary, clearing F5 E1 error code) to ensure proper operation of the door lock. Immediately cancel the Clean mode to observe proper operation of door unlock.

If this doesn't help try this link to locate the right model:

http://www.whirlpool.com/catalog/category.jsp?categoryId=76

Feb 27, 2011 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

I wanted to change the time hour. I pushed clock and up arrow at a time and the clock is showing 5 AB. The screen is frozen. I can't use any options. How could I get it back to normal? Thank you for your...


To
provide sabbath feature (or to cancel this setting):
1. Push the PREHEAT pad and set the oven
temperature to 500°F/260°C or more using the UP
ARROW pad.
2. Push the PREHEAT pad within the next 2 seconds
for 3-4 seconds. A beep sounds and a number
appears in red to the right of the display. For the
conversion, "3" must be displayed. If another number
is displayed, push the PREHEAT pad and select
"3".
3. Push the UP or DOWN ARROW pad to change
from 12 hour to 9999 in the display, for no 12 hour
shut-off.
4. Push the CANCEL pad to confirm your choice.

Other Displays:
When proceeding through steps 1 and 2 in the
Temperature Scale Conversion or in the elimination
of the Sabbath feature /12-hour Shut-off time limit,
two other words can be seen in the display. One is ESC
with O in red. It cannot be changed. The other is USE or
SALE with 3 in red. This one is for factory use and should
stay on USE.

Nov 20, 2010 | Magic Chef 9112 Gas Double Oven

1 Answer

Error codes


Hello raco1
Welcome


I need your model number to look up the fault code !!!!
You said , you see fault codes, FD F3 and E2 F3 is showing up on display pane


Looks like this may be your problem
F3 - E2 - Oven to hot -Replace oven temperature sensor


Waiting for your response.
When responding send me this whole communication . Not just your answer!
Thank you Huuum.

Oct 03, 2008 | Whirlpool RBD305PD Electric Double Oven

5 Answers

Whirpool GBD307 - Display not working


We had the same error codes F2 E6. We were told to turn off the breaker to the oven for 5 minutes and then turn it back on and it will reset itself. We tried it and it worked! Whirpool wanted to send someone out on a service call. Thank goodness we didn't!

Mar 28, 2008 | Whirlpool RBS245PDS Electric Single Oven

2 Answers

Display 11


your control must be fried...dacor fault codes are f0 to F8 the display must be faulty..

Aug 25, 2007 | Dacor ECD230 Epicure Electric Double Oven

Not finding what you are looking for?
Jenn-Air 27 in. Electric Single Wall Oven with Multi-Mode Convection Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

Cindy Wells

Level 3 Expert

5221 Answers

Are you a Jenn-Air Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...