Question about Linksys Wireless-G WRT54GS Router (e125894)

1 Answer

Slingbox configuration for remote viewing - How to set up ?

I am unable to remotely view my slingbox on my mobile device, I am being directed to configure my router for UP&P - (universal plug and play). I need instructions on doing so without disrupting my internet connection on my PC or a laptop that is part of my network. Would appreciate the help.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 61 Answers
Re: slingbox configuration for remote viewing - How to...

Access your router interface page by typing in the address bar of your browser, the login is Admin password is admin. Click on the "Administration" button on the top right. On the bottom you will see the option to enable UPnP. enable it there and you should be good to go.

Posted on Jan 09, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to delete console port and telnet passwords through BootROM?

1. Connect a PC to the device with a serial cable and log in to the device through the console port.
2. Restart the device. When the message "Press Ctrl+B to break auto startup ..." is displayed, press Ctrl+B and enter the password to display the BootROM main menu.
3. Select choice 4 to enter the Startup Select menu.
4. Select choice 1 to view the system configuration.
In V200R001C01SPC300 and later versions, you can use the following method to view the configuration file. In Huawei V200R001C01SPC300, the menu choice is Startup Information. In Startup Information and later versions, the menu choice is Display Startup.
Startup Select

1. Display Startup
2. Set Boot File
3. Set Config File
4. Startupfile Check Manage
0. return

Enter your choice (0-4):1

************** Current Stratup info ****************
Valid Flag State : Vaild
Boot File Name : sd1:/
Config File Name : sd1:/vrpcfg.cfg
Licence File Name :
Patch State : Deactivate
Patch File Name :
Voice File Name :
In V200R001C01SPC200 and earlier versions, the configuration file cannot be viewed. The system often uses the file or
5. Rename the configuration file.
6. Restart RouterA.
7. Stop Auto-Config.
8. Change the renamed configuration file to executable file. Select one file format.
9. Restore the configuration.

Aug 19, 2015 | Routers

1 Answer

I have an Eyemax DV-9060 that I am unable to remotely view from my iPhone 6. I currently have the DVR set to a fixed local IP of, and have my router (modem/router combo unit from Comcast)...

If you are setting this up as a static IP then you need to have the router IP address input into the DVR to allow it to pass through. You also need to have a gateway set up to allow incoming and outgoing signals to the host site.

Mar 23, 2015 | Gateway Routers

2 Answers

How to find dvr ip address

what do you want the DVRs local IP address on your LAN or your internets public IP address?

to see the local IP that the DVR is on, check the menu's in the DVR as if configured properly you should have it set up as a static IP on your LAN...

if you can not find it there, you should be able to log into your router and view connected devices... some routers are better than others, but you will probably only be able to see devices that are connected and assigned an IP address from your routers DHCP table..

if you want your public internet IP address then go to but in order to view your DVR from a different location on the internet you will need to set up port forwarding on your router - the DVR manual should show what ports need to be forwarded...

you may also want to consider using a dynamic DNS service if you do not have a static IP from your internet provider... most DVRs that I have encountered provide a dynamic DNS service..


Sep 15, 2014 | Routers

1 Answer

How do I set up remote live viewing on my I pad

you will need a compatible application(iCamViewer) to connect it to your camera or camera server for iPad and that allows you to configure streams and IP settings as as well as your username and password to access the camera.
If you are using static internal IP address so you have to do Port Forwarding Setup.
more technical help router configuration for your CCTV routers

May 07, 2014 | Routers

1 Answer

Need help please. I have a Digimerge DH200 DVR with one camera. I've set is up and can view my camera locally over the internet and on the CMS DH software. Now I need to view it remotely. I have a

I have the ame problem. also need help with email setup. digimerge will not help. horrible co. they say I have to pay a tech to come out. no support whatsoever.

Oct 12, 2012 | Routers

2 Answers

I am trying to connect a slingbox to my home network, but my network cant find the slingbox, do you have any ideas?

Depends on how the Slingbox is configured. It should be set up to use DHCP and try to get an IP from your router, either by wireless or by hardwired ethernet.

I would help if you could details how your network is configured.


Sep 27, 2009 | Belkin (F5D7230-4) Router (587009)

1 Answer

Can't access remotely my cctv. I have a dynamic ID address

it sounds like your router is setup for remote management. this means that when you type in the ip address the admin screens come up instead of the camera system. you need to turn off remote admin in the router and then configure port forwarding to reach your cameras

Jun 05, 2009 | Gateway Wireless-B Router (wbr-100)

1 Answer

New internet provider and now can not use remote viewing

If you have changed Internet Providers (which I assume you have considering you refer to changing from DSL to Cable modem), your "location" on the Internet has also changed.

Try going through the setup process with your Slingbox again as if it were the first time you had installed it.

Mar 18, 2009 | ParkerVision SignalMAX WR1500 / SignalMAX...

1 Answer

Cctv remote view/ adtran total access 900e

It's not likely that VZ gave you dynamic IP's, but it's possible. You should have been given more than one. If not, it's better to get more and a set of configuration instructions. In the last one I set up, we put a 5-port switch on the ethernet port coming off the Adtran, then fed 2 routers and a security system from the switch. Our gateway was one number lower than the bank of IP's we had, and we just gave each piece of equipment a static ip address and gateway to the gateway :-)


Sep 19, 2008 | Routers

1 Answer


Access your router interface page by typing in the address bar of your browser, the login is Admin password is admin. Click on the "Administration" button on the top right. On the bottom you will see the option to enable UPnP. enable it there and you should be good to go.

Jan 09, 2008 | Linksys Wireless-G WRT54GS Router...

Not finding what you are looking for?
Linksys Wireless-G WRT54GS Router (e125894) Logo

575 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts


Level 3 Expert

18258 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers


Level 3 Expert

4327 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides