Question about i-mate JASJAR Smartphone

1 Answer

I-mate i dropped my i-mate today and now it just has a plain white screen.... i need this for work.. it doesn't even charge properly!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers
Re: I-mate

If you have tools to open the jasjar just refixed the coxial cable from back or try to format

Posted on Feb 11, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Iam was using HTC TYTN 2,it was working fine till yesterday,today moring i dropped my tytn2 in road by accidently,i took it back and my phone was working good i can receive the call and i can make the...

it seems when you dropped the phone some stuff shifted in the mobile if you can pull the phone and just screw it back up it should be ok, if not i recommend contact a technician for his assistance

Sep 18, 2010 | HTC TyTN II Smartphone

1 Answer

My phone won't start on!

Nokia sometimes has a glitch where if the battery is too low it will not start properly again. Let it charge for some time when turned off - a couple hours, so it has enough battery power then remove the battery for 5-10 minutes, put the battery back in and try start it. What this does is re-sets the phone so it can start again. Also if there are problems during use that solution usually fixes it as well. What is happening is due to a low battery it tries to resume where it left off and cannot load itself properly to do so. Letting it go completely dead with no battery for a few minutes lets it drop it's old info and reload it's info to work again.

Oct 19, 2009 | Nokia N75

1 Answer

Ive got a pda2k... my touch screen is'nt working......

hello there!

thanks for using

Sorry about what happened to your I-mate PDA.

If have already white strip on the screen, and some colour pigments are presently shown. You should not panic. Just bring your pda to the service center, i had mine fixed as well, i have the i-mate jama 101, when i dropped it, I couldn't see anything but bright light. and the screen was not responding. but anyhow, lets hope that the LCD was not damaged, what you can do, just remove the battery, and let your technician check it carefully. if you still have the warranty, it would be perfect.

good luck!

Feb 19, 2009 | i-mate PDA2k Pocket PC

3 Answers

Imate jamin not turning on and not charging

I had the same problem with my Jamin so sent if off to the technician who informed me the Jarmin's internal circuitry prevents the phone being charged when the battery is under a certain voltage so when you use a plug in charger because the battery has very low power it does not trip a circuit in the Jamin to start the charging process. The only solution to to take the battery out of the unit and charge it with a stand-a-lone charger. Hope this makes sense.

Sep 13, 2008 | i-mate JAM Pocket PC

2 Answers

I.Mate -JAQ charging problem

my i mate jaq charging jak iss broken i need charging jak jumoers

Aug 27, 2008 | i-mate JAQ Pocket PC

2 Answers

White screen

First of all remove battry and reinsert it but don't push the ON switch.Press imate keyboard top second left and second right (near by call keys) buttons together, holding down with push the soft reset button,these all three buttons should be pressed firmly.after this a message will appear on the screen then press 0.this will hard reset ur device and restore the factory settings.

Jan 23, 2008 | i-mate JASJAR Smartphone

2 Answers

PDA displays only a white Screen

I recently replace my lcd and initially had that problem.  I fixed it by reseating the cable that connects the motherboard to the main phone piece.  (its the cable that is about 1/2 an inch wide and is very short, barely wraps around motherboard).  Reseat that and your white screen issue should be fixed)

Nov 30, 2007 | i-mate Pocket PC

1 Answer

White screen

I'm no expert, but this is what happened to mine after one of my kids stood on it and cracked the screen. Maybe you have a small crack which is causing the white screen?

Aug 26, 2007 | i-mate K-jam Smartphone

1 Answer

Screen alignment

tap the screen at target for few moment untill align screen does not takes several attemp.after align screen disappear time & date setting option appear.set it.after this window will takes few minutes.after this phone will be started.

Aug 23, 2007 | i-mate JAM Pocket PC

Not finding what you are looking for?
i-mate JASJAR Smartphone Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top i-mate PDAs Experts


Level 3 Expert

18259 Answers

Martin Murray

Level 3 Expert

1614 Answers

bharat patel

Level 2 Expert

268 Answers

Are you an i-mate PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides