Question about Audio Players & Recorders

4 Answers

TEAC SR-L100 Hi, I bought a TEAC cd music system SR-L100 several months ago. Ever since I bought it the light that lights up the face of the clock has been a problem. It is just too bright at night. I know I can dim it, and I do, but it is still too bright at night. Is there some way that I can further dim the light? Thanks, Aaron

Posted by on

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I used a piece of grey window tint like you get from any hardware store. Cut it to size, dampen the screen slightly, and use a flat tool to work out any air bubbles. I did this 4 years ago. I have had no further " too bright" issues!

Posted on Jun 01, 2012

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Go to your nearest music store and purchase a red gel (used for illuminating the stage). Or any transparent red piece of plastic. You can trim it to about 4X4 and place it in from of the clock face. FYI the red color is used in aircraft to illuminate the instrument panel with the least effect on the retinas. I think it has to do with the wave length of the light or something like that.
RMR

Posted on Mar 01, 2008

Ad

I use a 5x7" piece of cardboard to cover it. It doesn't interfere with the speakers, and keeps the room dark. Besides, it's better to not see the time when you're trying to sleep.

Posted on Jan 10, 2008

Hi i am from mongolia

Posted on Jan 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set clock on the teac sr-l100 just bought at yard sale, no info book. thanks d


The "set time" button on my SR-L100 is located inside the CD compartment. To set the time the unit needs to be in the standby mode. Press and hold the set time button until the time blinks, then use the tuning/clock adj. dial to set it. Hope this helps!

To set the alarm on the TEAC SLR 100:
Be sure the radio is set to off or standby.
Hold down the BUTTON for the alarm you wish to set (#1 or #2) until the TIME ON THE DISPLAY begins flashing. Use the TUNER/CLOCKSET DIAL to change the display to the time you wish the alarm to go off. pRESS THE ALARM BUTTON BRIEFLY TO RETURN TO NORMAL OPERATION.


May 28, 2011 | Teac SRL50 Clock Radio

2 Answers

I cannot set the clock on my Teac MC-DX50i


put the system in standby then use your forward and revese buttons to set the time.

May 31, 2009 | Teac Hi-Fi Radio w/ iPod Dock BLACK...

1 Answer

Intermittant failure LED display of my TEAC SR-L50 Clock Radio


Hi,

Offhand, the failure of the 2 segments would seem to be intermittent (granted affected by humidity). Technically, I would suspect a case of cold solder. They could be replaced or if you know somebody who could solder, then it is a matter of re-heating the joints and adding a dab of soldering lead.
356195c.jpg
Just a start, do postback how things turned up or should you need additional information. Good luck and Thank you for using FixYa.

Nov 21, 2008 | Teac SRL50 Clock Radio

1 Answer

Teac SR-L100 Clock Radio


There is button inside the CD chamber. Press it for a few seconds.

Aug 12, 2008 | Teac SRL200i/B Clock Radio

1 Answer

Need operating instruction


I have the same problem, I called the company but they want to charge you $8.95 +S&H, said that I would figure it out on my on. But here is the number. 323-727-4240

Jun 23, 2008 | Teac SRL50 Clock Radio

3 Answers

TEAC SRL100 Set clock


The "set time" button on my SR-L100 is located inside the CD compartment. To set the time the unit needs to be in the standby mode. Press and hold the set time button until the time blinks, then use the tuning/clock adj. dial to set it. Hope this helps! Ted

May 26, 2008 | Teac SRL50 Clock Radio

3 Answers

CD Music System Clock Radio SR-L100


Open CD Cover. In the left rear is the time set button. Depress it for at least 3 seconds and you will be in the time set mode. Use the "Skip" rotary knob to adjust the time.

Dec 25, 2007 | Audio Players & Recorders

2 Answers

Right clock time


Hold the memory button on the remote control, wait for the written "SYNC ON" on display and then press the track forward (one on the right with the double arrow).

Now normally set the clock.

Dec 02, 2007 | Teac SRL200i/B Clock Radio

1 Answer

Loud noise from subwoofer on standby or while playing music


Hi There, Please advise us what happens when you turn off the sub woofer is the hum still there....??

From YUBEUT.

Nov 27, 2007 | Teac CD-X8 CD Shelf System

Not finding what you are looking for?

Open Questions:

Audio Players & Recorders Logo

Related Topics:

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5444 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75404 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...