Question about Jenn-Air SCE30600 Slide-In Electric Kitchen Range
My Jenairre fan will not turn off. No function buttons work but the light on the oven.
Posted on Jan 11, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Stopping cold air
Depending on where it is vented you probably wont be able to stop the air. Take the grill out and see if there is a door flap that is supposed to close when the fan is off. If not your out of luck.
Posted on Dec 21, 2007
Yes the ductless fan will work for you. I have that setup here at my house. Just make sure that you have a charcoal filter installed in the microwave where the air comes out on top. If it is already vent less the filter is probably already there.
Good Luck and Please Rate FixYa!
Posted on Mar 03, 2009
The problem may well be a loose NEUTRAL wire to the range. At the wire terminal on the range check for power from each supply leg(L1 to N) and (L2 to N) to neutral(should read 120 volts) and across each power leg (L1 to L2) should read 220 volts.
If you in fact have 220 volts into the range with good neutral contact the problem is a bad neutral(ground) in the wiring harness inside the range.
Posted on Sep 29, 2009
The switch for the optional grill attachment is activating...pull the tray/pan on the left side that holds the two burner grates toward the front...it should shut off. To correct the problem permanently, you'll need to adjust the position of the switch. The switch gets lose over time and slides on its mount until it gets out of range. The purpose of the switch is to activate the blower continuously when using the optional grill accessory. When you remove the left-side grates and the tray/pan the grates set in...you'll notice a protruding piece of metal on the front of tray/pan that fits into a hole in the cavity where the tray sits. Inside that hole is the switch that is out of position. Getting at the switch to adjust its position is not difficult, but you need to remove the upper front panel...KLS
Posted on Mar 04, 2010
Tips for a great answer:
Jul 09, 2010 | Jenn-Air JES9860 Electric Kitchen Range
Jun 25, 2010 | Jenn-Air 30 in. CCE3401 Electric Cooktop
Jan 04, 2010 | Jenn-Air Ovens
Dec 31, 2009 | Jenn-Air JGR8850 Gas Kitchen Range
Oct 16, 2009 | Jenn-Air JED8430 Electric Cooktop
Mar 18, 2009 | Jenn-Air JGW8130A Electric Single Oven
Jan 12, 2009 | Jenn-Air JDB6510 Built-in Dishwasher
May 20, 2008 | Jenn-Air JMV8208A Microwave Oven
Dec 07, 2007 | Jenn-Air JJW8230D Electric Double Oven
Jan 23, 2014 | Jenn-Air SCE30600 Slide-In Electric...
353 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: