Question about Lexmark X2600 InkJet Printer

Open Question

I cant install a new cartridge it wont display the installation page

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: HP Photosmart D7360

HP support decided it could not be repaired on line, agreed to replace it but found it was a few days out of waranty...so it is dead in the water. Probably not cost effective to repair it.

Posted on Aug 04, 2008

hemantraj
  • 638 Answers

SOURCE: installed new black ink cartridge

to complete the alignment it needs to detect the lines printed from both the black and colour cartridges.maybe ur black cartridge is printing the necessary pattern but the colour is not printing so when it tries to read the colour paattern ,it cant read and cancels the alignment and ejects the paper out..it will keep on doing this if it cannot read the both colour and black patterns.see to it that both ur cartridges are printing and working properly.

Posted on Dec 17, 2008

  • 75 Answers

SOURCE: streaks on printed page full length even after installing new cartridge

i took out my drum and cleaned it with alcohol and then wiped down the inside of the printer anywhere the drum touches with a towel soaked with alcohol and the did about 40 prints and it fixed my pagepro (with each of these 40 prints the the quality got better)

Posted on Jul 11, 2009

cene765
  • 787 Answers

SOURCE: canoon 1p2600 wont print only in black when the

The printer need both cartridges inside it to printing.Put old color cartridge, new black and press and hold the resume button for 5 seconds.

Posted on Oct 20, 2009

  • 20 Answers

SOURCE: New cartridge installed printer gives message that

Check both cartridges, one might still have plastic film that needs removal.

Posted on Dec 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our copier (model x5650) stopped while receiving several pages , and displayed FAX IN MEMORY COLOR AND BLACK INK CARTRIDGE NEEDS REPLACED. I installed a new black cartridge , however the display...


YOU NEED TO LET THE PRINTER RE-ALIGN ITSELF AFTER INSTALLING PRINT CARTRIDGES, THE PRINTER SHOULD HAVE PAPER IN IT TO DO THIS, THE TEST PAGE PRINTED WILL THEN NEED TO BE PLACED IN THE PRINTER ON THE GLASS, PRESS SCAN, THIS SHOULS RESET YOUR PRINTER.

HOPE THIS HELPS!

MARTIE

Aug 24, 2011 | Lexmark C533DN InkJet Printer

2 Answers

I forgot how to change the ink cartridge on my printer i dont rember where it is please help


If you go to the below link -

Canon MP530 manual


and look at pages 44 - 46 it shows you how to change the ink cartridges. Just bear in mind the page takes a while to load as its a 4mb pdf so it will just stay black for a while until it downloads.

Thx, if this solution helps please rate :)

Feb 03, 2011 | Canon PIXMA® MP530 All-In-One Printer

1 Answer

How do you install cartridge in z82 printer


To install the cartridges, please follow the steps given below:
1. Press "Setup" until "Cartridge" appears on the display.
2. Press the "Right arrow" button until "Change cartridge" appears on the second row of the display.
3. Press "Enter/Select." Now you may install the cartridges in the cartridge carrier.
4. Press "Right arrow" to select the color cartridge type that you installed, once "Left Cartridge?" appears on the display.
5. Press "Enter/Select."
6. Press "Right arrow" to select the black cartridge type that you installed, once "Right Cartridge?" appears in the display.
7. Press "Enter/Select."
An alignment test page should print if "New Cartridge" is selected.

From
Jeethu

Sep 15, 2010 | Lexmark Color Z82 InkJet

2 Answers

How do I get a meter reading of number of copies?


Here you go.

  1. Press the [Reports] button on the Control Panel

    m15-console-report-but.jpg

  2. Press the [Up] or [Down] arrow until 'Systems Data' is displayed on the Display Screen.
  3. Press the [Enter] button.

    The System Data list will be printed with the following information:
    • Total Page Counts: Total number of pages printed
    • CRU Prints: Number of pages printed using the current Toner (Dry Ink) Cartridge
    • Replaced Toner Counts: Number of new Toner Cartridges installed in the machine
    • Replaced Drum Counts: Number of new Drum Cartridges installed in the machine
    • Current Drum Page Counts: Number of pages printed using the current Drum Cartridge
    • Platen Scan Page Counts: Number of pages scanned using the Document Glass
    • ADF Scan Page Counts: Number of pages scanned using the Automatic Document Feeder (ADF)

Feb 10, 2010 | Xerox WorkCentre M15i Laser Printer

1 Answer

Error:yellow crtridge is exhousted


If the cartridge is empty then it wont print. If you have installed a new cartridge then the sensor may not be functioning.
Before trying anything please install a new cartridge from box.

Jul 12, 2009 | Samsung CLP 315 Laser Printer

1 Answer

Installed new black ink cartridge per instructions. HP #56 - machine type hp psc 2210 all-in-one. Machine instructed how to run cartridge alignmet check. In all modes machine runs about one half check and...


to complete the alignment it needs to detect the lines printed from both the black and colour cartridges.maybe ur black cartridge is printing the necessary pattern but the colour is not printing so when it tries to read the colour paattern ,it cant read and cancels the alignment and ejects the paper out..it will keep on doing this if it cannot read the both colour and black patterns.see to it that both ur cartridges are printing and working properly.

Dec 17, 2008 | Office Equipment & Supplies

2 Answers

My printer wont print in color & its a new color ink cartridge


have the printer preferences been changed accidentally to print in greyscale? Is the cartridge installed correctly? Now and again if the cartridges are opened and not installed straight away the ink dries up in the nossel and clogs the printer head, easily rectified with some cleaning solution. Cartridges also go out of date. hope this helped

daveywhite

Nov 11, 2008 | HP DeskJet 812c InkJet Printer

2 Answers

Printer wont work!


get new printer drivers here first

install, then run a test page with printer disconnected from computer..

if that works, then reconnect printer to computer. should 'see' it, and proceed..

Mar 03, 2008 | HP PSC 2410 All-In-One InkJet Printer

1 Answer

New cartridge installed but will not print


hi, first take a printer self test to check if the cartridge is installed properly,as sometimes we forget to remove the protection tape on the nozzel of the new cartridge.. let me know

Dec 16, 2007 | Brother MFC 1850MC Thermal Printer

Not finding what you are looking for?
Lexmark X2600 InkJet Printer Logo

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...