Question about Singer Quantum XL-1000 Computerized Sewing Machine

4 Answers

How do you recalibrate the touch screen on the Quantum XL-1000?

Posted by on

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Enter service mode....

Press the start/stop switch and hold it while you power the machine on.
THEN, press the reverse switch, hold it and press the lcd. Release the reverse switch AFTER you touch the LCD.

Posted on Mar 11, 2010

  • sewandsewfis
    sewandsewfis Jan 06, 2013

    whats next its not workimg

  • Sheree Paulson Feb 11, 2013

    This was almost helpful. I got so far as an "Adjustment Mode" screen. Touched the four dots on the screen in the order they appeared and then the screen went blank. Whats next? --- I'm stuck

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The answers above need a little clarification. Once you get into service mode, a small box appears on the LCD screen. Touch that box with your finger...then a 2nd box appears. Touch that 2nd one with your finger...then repeat with the 3rd and 4th box. Touching the boxes on the screen is how it recalibrates. Once that is done, you need to save the calibration. I touched all the buttons below the LCD screen, but I think it is the lower-left one. Turn the Singer off and then back on and it should be calibrated.

Posted on Nov 28, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am having a problem with my xl-1000. When I turn on my computer the screen light comes on then you are suppose to touch the screen to allow the machine to turn on so you can start to sew. I wait for a long time (20 30 minutes then maybe it will allow me to start sewing. WHAT IS HAPPENING???? help help pLS

Posted on Sep 09, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

When you say "recalibrate" what do you mean? What exactly are you having trouble with?

The touch screen has a "help" feature that walks you through many, many different things on the machine. You can make the screen darker or lighter, learn the "basics" of the machine and many other things.

If you'll describe your problem a little more in-depth, maybe I can walk you through a solution.

Thanks!

Posted on Dec 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix my misaligned xl-6000 touch screen?


contact singer customer support or you can take the machine to a sewing machine shop to have it checked

Nov 27, 2015 | Singer Quantum XL-6000 Computerized Sewing...

3 Answers

The LCD Touch-Screen not working


Hi-

Chances are you need to reset the settings. check the guides as well for the correct setup.

Hope this helps

Sep 22, 2008 | Singer Quantum XL-1000 Computerized Sewing...

1 Answer

The touch screen on my singer quantum xl-1000 lights up but no icons are showing. What should I do?


I have instructions for recalibrating the screen on an XL-6000, which is similar enough that it should work; however, give it a try at your own risk. I would point out, though, that at this point you probably have nothing to lose.

While the machine is turned off, you hold down the scissors button, reverse button, and the green/red light button all at the same time. While pressing these buttons, you turn your machine on and can let go of the buttons. You take the pointy end of your lint brush and use it as a stylus to touch a little red dot on the screen (that also has that pen looking thing that I had messed with and that caused my trouble), the dot will move to another position and you will touch it again. It moves again two more times, and each time you will touch it with the pointy end of the brush. Then you will touch the treasure chest box on the screen to save what you did. You will then turn off the machine and turn it back on, and then things work again!

Oct 19, 2014 | Singer Quantum XL-1000 Computerized Sewing...

1 Answer

Singer Quantum XL 1000 LCD Screen not working properly and needs to be realigned. When I try to select an "A" to stitch a name, "B" is the letter that is chosen. I need to realign,...


Hi jlbostwick,

Here's what you can do to recalibrate the touchscreen of your machine:

Enter service mode.

1.Press the start/stop switch and hold it while you power the machine on.

2. Then, press the reverse switch, hold it and press the LCD.

3. Release the reverse switch AFTER you touch the LCD.

Hope this helps.

Thank you for using FixYa.

Sep 21, 2011 | Singer Quantum XL-1000 Computerized Sewing...

2 Answers

I had my quantum xl 1000 sewing machine repaired.


Go to the internet, type find manual for Singer Quantum XL-1000, you should get a lot of links of which you can download.

Apr 08, 2010 | Singer Quantum XL-1000 Computerized Sewing...

1 Answer

Cannot navagait at all on screen


Need touch screen replaced. Take to singer service center. Listing at singerco,com.

Jan 08, 2010 | Singer Quantum XL-1000 Computerized Sewing...

1 Answer

Singer XL1000 touch screen lights but does not


Need to have touch screen replaced, parts availalbe thru linssewvac@hotmail.com or another authorized service center

Jul 19, 2009 | Singer Quantum XL-1000 Computerized Sewing...

1 Answer

The touch screen no longer responds to touch


More than likely the lcd board/screen needs to be replaced. Find a dealer who services Singer machines and they can order the part and install it.

Jul 07, 2009 | Singer Quantum XL-1000 Computerized Sewing...

Not finding what you are looking for?
Singer Quantum XL-1000 Computerized Sewing Machine Logo

Related Topics:

976 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Cindy Wells

Level 3 Expert

5056 Answers

mystery_soul

Level 1 Expert

41 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...