Question about McCulloch Garden

1 Answer

How to test magnito on McCulloch 310 chainsaw

How do I test the magnito on McCulloch 310 chainsaw

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers

The only way to test an ignition module on any small engine is on the machine. Simple and easy.First remove the spark plug , then remove the wire that connects the module to the kill switch, its located right next to the plug wire above the laminations. Put a spark tester in the pkug boot and ground the other end. Pull the rope and look for a spark. Its that simple. If you have a spark, check the switch and wire, if you dont,check the grounding screws that hold the module to the block for a clean contact.If you still have no good spark its time to replace the Ignition module (coil).If you dont have a spark tester, ask someone dumb enough to hold it. If they jump and cuss you out you know you have a good spark

Posted on Nov 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove a fly wheel


Intermittent spark, new spark plug, no start
...chain saw cs 38cc smh038ub24ra em. u.s. epa ph-1, 95-98 ca. emissions regulations for ulge's. d048 Remove your flywheel cover then unhook the small wire from the magnito (coil). Tuck this wire out of ...

Oct 07, 2015 | McCulloch 16 Inch Gas Chain Saw MCC1635AK

1 Answer

Powermac 310 no spark


How do I test the ignition module out off the chainsaw? Or how do I know an ingnition module is working properly prior to instalation?

Apr 20, 2013 | McCulloch 16 Inch Gas Chain Saw MCC1635AK

1 Answer

I would like an owners manual for a mcculloch


A parts book can be found at the following URL.
http://mcculloch.motoruf.de/spell/get_file.php?filepath=/Mipl/pspm310.pdf

That's all i could find?

Jul 07, 2010 | Garden

1 Answer

I need the fuel/oil mixture for a McCulloch PowerMac 310 chainsaw...


My OM says 40:1, like the current recommended McCulloch mix.
1 gallon of premium fuel to 3.2 ounces of quality 2-cycle oil.
1 liter of premium fuel to 100 milliliters of quality 2-cycle oil.

If you have more questions or need additional help please reply below and I will get back to you. Good Luck. HTH
Lou
Thank You for using FixYa.

Apr 19, 2010 | McCulloch Garden

2 Answers

I need a user manual for a McCulloch PM 310 chainsaw. 2.1cc,electronic ignition, 16 inch bar.


I did a search and got many hits for Stihl MS310 I didn't see any for a McCulloch 310 here:
Beg for manuals thread (ArboristSite) (free to join)
http://www.arboristsite.com/showthread.php?t=72322
I tried the official McCulloch site yesterday and got nowhere. GL
Lou

Oct 20, 2009 | McCulloch Garden

1 Answer

How does the spring fit McCulloch Power Mac 310 Throttle/handle?


There is a handle detail near the bottom. I suggest you save this for future reference.
http://weborder.husqvarna.com/order_static/doc/MIPL/MIPL1984/MIPL1984_pspm310.pdf
It took me a while to find this, I knew it existed. GL
Lou

Sep 21, 2009 | Garden

1 Answer

Mcculloch 310 oil mix ratio


The proper gas/oil ratio is 50:1, that is 50 parts gas, to one part (2) cycle oil.

If you plan on leaving gas in the tank when not being used, I always recommend adding some gas stabilizer, such as Sta-bil, which makes starting the chain saw easier regardless of how long the fuel mix has been sitting in the tank or saw (up to 2 years according to Sta-bil label)

Hope you find this Very Helpful and best regards!

Sep 09, 2009 | McCulloch 16 In 4.5 Hp Electric Chainsaw...

1 Answer

Intermittent spark, new spark plug, no start mcculloch chain saw cs 38cc smh038ub24ra em. u.s. epa ph-1, 95-98 ca. emissions regulations for ulge's. d048


Remove your flywheel cover then unhook the small wire from the magnito (coil). Tuck this wire out of the way. Reinstall your cover than start the saw. If your spark remains constant you have a short in the kill circuit or something is bent or misaligned between the off switch and the kill wire. If you still get intermittent spark, your magnito is going bad.

Mar 31, 2009 | McCulloch Garden

1 Answer

Gas to oil ratio for a McCulloch power mac 310


When in doubt 40:1 is the always safe mix for any 2 stroke, synthetic oils 50+:1 use there recommendations. Always use the same(premium quality) 2 stroke oil to avoid fuel issues.

Mar 17, 2009 | McCulloch Garden

Not finding what you are looking for?
Garden Logo

Related Topics:

690 people viewed this question

Ask a Question

Usually answered in minutes!

Top McCulloch Garden Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

roeb

Level 2 Expert

263 Answers

Are you a McCulloch Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...