Question about Kenmore 22422 Top Load Washer

1 Answer

Washing Machine Agitator won't spin when going into rinse cycle

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 126 Answers
Re: Washing Machine

If you mean the tub wont spin then it could be your drive coupler.

Posted on Jan 12, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Beko WMP652W washing machine will start cycle but get stuck at end of wash, doesnt go onto rinse or spin any help please?

see the next steps and use the common sense: God bless you
When the cycle doesn't advance, it's probably the timer or a cold-water supply problem: It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer. It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

Aug 01, 2012 | Washing Machines

1 Answer

Water won't quit filling and agitator does not engage into the cycle.

Did you solve this problem -have one doing the same-feed back -please!

Mar 22, 2012 | Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

I have a Maytag Model A412, series 11 washing machine. After the machine fills with water the machine appears to start its cleaning cycle but the agitator doesn't work. The water starts & the...

if this is a two piece agitator,it should behave like a ratchet turn freely clockwise and catch counter clockwise if it doesn't catch the agitator "dogs " are shot this is a verry inexpencive repair

Jun 08, 2011 | Washing Machines

2 Answers

Hi, our simpson enduro 701 washing machine does not spin back and forward in the deep rinse cycle. but operates ok and spins in spin cycle. thankyou Tina.

Hi Tina just read your posting. From the information in your posting the machine fills, then when the machine is full of water the agitator moves clockwise then anticlockwise until it gets to the rinse cycle then drains the water ,then it fills for the rinse cycle but does not move the agitator in the rinse cycle.Then it drains and spins the clothes dry .Is this assessment of your posting correct.If it is not 100% correct please reply to tell me what the machine is doing or not doing.If it is correct then the problem with your machine is the control board.Is your model the electronic one with the push buttons?Looking forward to your reply.

Jun 26, 2010 | Washing Machines

1 Answer

Washing machine stuck between wash and rinse.

first remove agitator by taking top of agitator off and putting your hand down the centre of it and unscrewing the wingnut holding the agitator to the main drive shaft. once the nut is loose pull the agitator out and bail the water out by hand using a pot or jug. once the bowl is empty u can look underneath. to the right hand side front of machine u will see a red or black fan that is attached to the pump. turn the fan clockwise and then anti clockwise and hopefully that will unjam the pump. the fan should turn freely. then put machine back on its feet.refit agitator. turn on unit select spin and it should start draining.if it doesnt reply back and i will help u more. please turn off power to unit b4 u work on it. good luck

Apr 12, 2010 | Fisher and Paykel GWL11 Top Load Washer

2 Answers

Kenmore 90 tub spins excessively clockwise during wash cycle.

there should be 2 or 3 springs that hold it, they mite have broke, take off back panel an check.

Jan 04, 2010 | Kenmore 24032\24036 Top Load Washer

2 Answers

GE profile washing machine won't agitate it spins out, drains,

Pull the agitator out and check the drive collar splines.If you have the model I think you have just pull straight up on the agitator. Once removed you will see the drive collar with a 7/16 head bolt,remove it and pull off the collar.First before pulling it off spin it if splines are stripped it will spin freely.

Mar 25, 2009 | GE Profile WPRE6100G Top Load Washer

1 Answer

Agitator doesn't turn during wash / rinse cycle

top the top off the agitator,remove cap inside,you have 4 plastic dog ears you need to replace,your local appliance store has them for $2,let me know how you do-mike

Mar 24, 2009 | Kenmore Washing Machines

1 Answer

GE Top Load Washing Machine -- Agitator will not cycle

Agitator's don't spin on wash cycle.

I would suggest washing the clothes without soap until they rinse clear. If you have hard water, the soap will not easily rinse out of clothes, or off of you when you use soap to wash or shower.

Reduce the amount of soap you use in each wash if this is the case. It sounds like your washing machine is working right.

Jan 26, 2009 | GE WBSR3140DW Top Load Washer

Not finding what you are looking for?
Kenmore 22422 Top Load Washer Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides