Question about Watches

Open Question

I have a Sharp watch. I want to disarm the hourly chime.

I have a Sharp watch. The model number is #SHP4027. The hourly chime is set to alarm. I have the instruction manual; but, I do not see any instructions on how to disarm the hourly chime. Could you please send me some instructions. Thank you very much.

Brandi B.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Kenneth Coleman Watch Beeps Every Hour! It Needs to STOP!

think of the top buttons from left to right as A & B and the bottom buttons from left to right as C & D. The way to turn the chime off and on is by holding the C & D Buttons simatainiously and the pressing the B button. This will allow you to turn the Hourly Chime Off and On. When you see the digital chime pattern in the display the chime is on. When no pattern is shown the chime is off. Hope this helps the ton of people who have purchased these watches & either did not have instructions with or lost them. This perticular watch has been annoying the whole household for quite sometime and has now been put to rest..lol

Posted on Mar 28, 2009

Ad
escapement
  • 2334 Answers

SOURCE: Lost Instruction sheet

Open your watch and find movement number. This must be pressed on movements plate. Upload full number here and I'll guide you further.

Posted on Dec 18, 2008

  • 2501 Answers

SOURCE: I can't turn off the

I couldn't find the makers' web site but you could try a suppliers' facebook website to get his address and ask him for a copy of the instructions.

Go to http://www.facebook.com/group.php?gid=73021234178&v=photos#!/group.php?gid=73021234178&v=wall

Good luck.

Posted on Aug 11, 2010

  • 1 Answer

SOURCE: I can't stop hourly chime in my Timex Indiglo

1-Place watch on hard flat surface.
2-Hit repeatedly with large hammer.
If you should need further assistance just ask.

Posted on Oct 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I make the watch stop chiming on the hour?


It seems that most 4 button electronic watches have similar directions. There should be four buttons. Clockwise from top left is the Light button, followed by S2 (Stop), S1 (Reset) and finally on the lower left S3 (Mode). Who knows why they are numbered this way. To set hourly chime Hold down S1 and press S3. When all 7 day flags show the chime is on. When they are off the chime is off. To set the alarm hold down S1 and press S2. Alarm icon will display or go off. Release S1 button and display will return to normal time. Hope this works for your watch

Nov 14, 2014 | Adidas Candy Digital watch

1 Answer

I cannot set the time on a wr165


here's a simple instructions of setting your watch


Watch setup instructions
for the Armitron Instalite All-Sport :

Mode B / \ C Date
' '
Light A \ / D Alarm

_____________________________________

Set time time / date

Press and hold B (Mode) untill alarm hours flash
Press D (Alarm) to advance these

Press B (Mode) again, seconds will flash,
press D (Alarm) to advance these

Press C (Date), minutes flash, press D to advance these

Press C again, hours flash, press D to advance these

Press C again, month flashes, press D to advance these

Press C again, Date flashes, press D to advance these

Press C again, Date flashes, press D to advance...... [suggestion from Chikita]]

Activating/Deactivating Hourly Chime

1. From "Normal Time Mode", press and hold "D" (Alarm) and
at the same time press "C" (Date) once. Hourly chime symbol,
( a house shape) appears in "chime" windows to indicate
the hourly chime will beep every hour.

Activatin/Deactivating Alarm

2. With "D" (Alarm) still pressed, press "C" (Date) again. Alarm symbol
( a clock shape with waves above it) appears in the
upper right to indicate the 24 hour alarm is now activated.

[I assume this "toggles" between off and on states,
so performing it again should turn off the alarm]
i hope this will help you.

Jul 22, 2011 | Armitron All Sport Digital watch

1 Answer

How to set the alarm


These are the instructions posted on the Armitron website. I hope they help.


1. From Time Telling Mode, press 'B' twice to enter the

Alarm Mode.

2. Press 'A'. Alarm Hours flash. Press 'C' to advance the

Alarm Hour.

3. Press 'B'. Alarm Minutes flash. Press 'C' to advance the

Alarm Minute.

4. Press 'B'. Alarm Time Zone flashes. Press 'C' to select

either Time Zone 1 or Time Zone 2.

NOTE: The Alarm is available in one Time Zone only.

5. Press 'A' to end set sequence.

6. Press 'B' to return to Time Telling Mode.



ACTIVATING THE ALARM AND HOURLY CHIME

1. While in Alarm Mode, press 'C' to activate the Alarm.

The Alarm symbol appears to indicate the Alarm will

sound at the preset Alarm Time for 20 seconds or until

'A', 'B' or 'C' is pressed.

2. Press 'C' again to activate the Hourly Chime.

"CHIME" appears to indicate the Hourly Chime will sound

every hour on the hour.

3. Press 'C' again to deactivate the Alarm.

4. Press 'C' again to deactivate the Hourly Chime.
5. Press 'B' to return to Time Telling Mode.

Apr 12, 2011 | Armitron Digital Sport #40/8095SIL Watch

1 Answer

I have an aquatech watch and don't know how to set it.


Thank you for contactng FixYa.
Setting the Time and Date
  • To set the time and date on your Aquatech watch, begin by pressing the "Mode" button three times to access the time setting screen. Use the "Lap/Reset" button to set the hour on your watch. Use the "Start/Stop" button to advance the numbers to reach the correct hour. When you've set the hour, use the "Lap/Reset" button to set the minutes, using the "Start/Stop" button to advance to the correct minute. Repeat the procedure to set the seconds, month, date and day of the week on your Aquatech watch.
  • Setting an Alarm
  • To set an alarm on your Aquatech watch, begin by pressing the "Mode" button two times to access the alarm setting screen. Use the "Lap/Reset" button to set the hours place, using the "Start/Stop" button to reach the correct hour. Repeat the same procedure to set the minutes for your alarm. When you have finished setting the alarm, activate it by simultaneously holding the "Lap/Reset" and "Start/Stop" buttons until the alarm icon appears. When the alarm sounds, silence it by pressing the "Lap/Reset" button.
  • Deactivating the Hourly Chime
  • Many Aquatech watch models feature an automatic hourly chime. This can be inappropriate and inconvenient in many situations. To deactivate the hourly chime on an Aquatech watch, simply press and hold the "Lap/Reset" and "Mode" buttons simultaneously. After you have correctly deactivated the hourly chime, the hourly chime indicator icon will disappear from the watch's main screen.

  • Best regards. Jewel

    Sep 18, 2010 | Watches

    2 Answers

    Setting Armitron Watch model WR330


    Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all ARMITRON watch manuals. Rate me, please.

    Mar 14, 2010 | Watches

    2 Answers

    I need to find someplace to download the instructions, since mine didn't come with any


    I just bought a Sportline 241 last week. The instructions are as follows. Note that there are no instructions for setting the 12/24 hour time option. Mine is in 24 hour mode (which is what I wanted), but I do not recall if it arrived that way or if I stumbled onto this mode when setting the time/date or alarm functions.

    I hope this helps.


    SPORTLINE 241 WALKING ADVANTAGE KEYCHAIN STOPWATCH

    FEATURES:
    24 hour stopwatch
    Time-of-day and calendar
    Alarm clock
    12/24 hour time option

    BATTERY:
    Replace with LR41 battery

    TO SET TIME AND CALENDAR:
    From normal time display, press MODE button three times to enter Set Time/Date Mode. Seconds is automatically selected.
    Press SPLIT/RESET button to cycle through minutes, hours, day, month, day of week, seconds.
    Press START/STOP SET button to change digits on any of the above (seconds only: resets to 00).
    Press and hold START/STOP SET button to advance digits rapidly.
    Press MODE button once to return to normal time display.
    From normal time display, press and hold START/STOP SET button to see the month, day, and day-of-week.

    TO SET ALARM:
    From normal time display, press MODE button twice to enter Set Alarm Mode. Hours is automatically selected.
    Press SPLIT/RESET button to cycle through minutes and hours.
    Press START/STOP SET button to change digits.
    Press and hold START/STOP SET button to advance digits rapidly.
    Press MODE button to return to normal time display.
    From normal time display, press and hold SPLIT/RESET button to see the alarm time setting.

    TO ARM/DISARM ALARM SOUND:
    From normal time display, press and hold SPLIT/RESET button, then repeatedly press START/STOP SET button to arm/disarm alarm sound.
    Alarm will sound when indicator shows in upper right corner.
    Release SPLIT/RESET button to return to normal time display.

    TO ARM/DISARM HOURLY CHIME SOUND:
    From normal time display, press and hold SPLIT/RESET button, then repeatedly press MODE button to arm/disarm hourly chime sound.
    Chime will sound when dashes appear along top of display.
    Release SPLIT/RESET button to return to normal time display.


    STOPWATCH OPERATION - GENERAL:
    From normal time display, press MODE button once to reach stopwatch timer display.
    After use of any stopwatch feature, press MODE button once to return to normal time display.

    START-STOP (TIME-IN/TIME-OUT) TIMING:
    With stopwatch timer on display, repeatedly press START/STOP SET button to start or stop the timer. When timer is stopped, press SPLIT/RESET button to reset timer to 0.

    SPLIT TIMING:
    With stopwatch timer on display, start the timer with START/STOP SET button. Repeatedly press SPLIT/RESET button to split or release the timer. Press START/STOP SET button to stop the timer. Press SPLIT/RESET button to reset timer to 0.

    1-2 FAST FINISH:
    With stopwatch timer on display, start the timer with START/STOP SET button.
    Press SPLIT/RESET button for STOP #1.
    Press START/STOP SET button for STOP #2. The stop time for #1 will now be shown.
    Press SPLIT/RESET button. The stop time for #2 will now be shown.
    Press SPLIT/RESET button to reset the timer to 0.

    Apr 17, 2009 | Watches

    1 Answer

    How do I set the digital time on a mossimo analog/digital watch. Where do I find instructions?


    If you have the Mossimo that is an analog and gisital andhas the four (4) buttons around the side, here is what I have:

    Legend:
    Button near the number 10 = A
    Button near the number 8 = B
    Button near the number 2 = C
    Button near the number 4 = D

    Switch Control/Normal Readout:
    Press:
    A = E.L. Backlight
    B = Mode
    C = For Month Date and Day of Week
    D = For Alram Time

    Setting Sequence:
    1. In normal time readout, press B three times to get normal setting mode.
    2. Press D once; Minute flashing, Press C to advance.
    3. Press D once: Hour flashing, Press C to Advance (A on display = AM, P = PM)
    4. Press D once: Date flashing. press C to advance.
    5. Press D once: Month flashing, press C to advance.
    6. Press D once: Day of Week flashing, press C to advance.
    7, Press B once: Setting completes - returns to normal time readout.

    Alarm Setting Times:
    1. In noraml time readout press B twice, Alarm Time hour flashing, Press C to advance.
    2. Press D once: Alarm Time minute flashing, Press C to advance.
    3. Press B once:Setting Completed, returns to normal time readout.

    Alarm Function
    1. In normal time readout, arm alarm by pressing C and D simultaneously. Alarm signal will appear.
    2. In normal time readout disarm alram by pressing C and D simultaneously. Alarm signal will disappear.
    The alarm will stop itself after 1 minute or can be silenced by pressing D or press C with snooze feature - will re-alarm in 5 minutes for the next hour.

    Chime:
    1. In normal time readout, chime activated by pressing D and B simultaneously. All day flag appears.
    2. In normal time readout, inactivate chime by pressing D and B simultaneously. All day flags disappears.

    Chronograph:
    1. In normal time readout, press B once to get into 'Chrono" mode. Pressing C will start the counting.
    Two Options for "Chrono" mose:
    a. Durning coutning, pressing C will stop count and then press D to reset the mark.
    -Or-
    b. During counting, pressing D will enter teh watch into laptime mode, meaning 1 portion of the count is registered on the display while the counting contiues until completed by pressing C, then D twice.

    Apr 08, 2009 | Watches

    1 Answer

    DECADE WATCH HAS NO SETTINGS MANUAL


    If your Decade watch is like mine it has 4 push buttons (10, 2, 4 and 8 "o'clock" positions respectively; and one pull and turn stem (at 3 o'clock position) -
    For the purpose of setting the watch and functions mentally label the push buttons as follows:
    10 o'clock position "A"
    8 o'clock position "B"
    2 o'clock position "C"
    4 o'clock position "D"

    NORMAL TIME SETTING

    1) In normal time readout press B (3x) to get to normal time setting mode: "SEC" will start flashing, press C for synchronization
    2) Press D once: "MIN" will be flashing, press C to advance
    3) Press D once: "HOUR" will be flashing, press C to advance ("A" is for am, "P" is for pm, "H" is for 24 Hour format)
    4) Press D once: "DATE" should be flashing, press C to advance
    5) Press D once: "MONTH" should be flashing, press C to advance
    6) Press D once: "DAY OF WEEK" should be flashing, press C to advance
    7) Press B once: Setting is completed, return to normal time readout

    ALARM TIMES SETTING

    1) In normal time readout press B (2x): Alarm time "HOUR" should be flashing, press C to advance
    2) Press D once: Alarm time "MIN" should be flashing, press C to advance
    3) Press B once: Setting is completed, return to normal time readout

    ALARM FUNCTION
    1) In normal time readout press C and D simultaneously: Alarm signal should appear
    2) In normal time readout disarm alarm by pressing C and D simultaneously: alarm signal should disappear

    Note: Alarm (when activated) will stop itself after 1 minute; or can be silenced by pressing D or press C to snooze for 5 minutes (operates for 1 hour)

    CHIME

    1) In normal time readout press D and B simultaneously: Chime signal should appear
    2) In normal time readout disarm chime by pressing C and D simultaneously: alarm signal should disappear


    CHRONOGRAPH (STOP WATCH FUNCTION)
    1) In normal time readout press B once to get into "CHRONO" mode: press C for to start counting event -
    While in Chrono mode there are two options
    a) During a counting event: press C to stop counting, press D to clear and reset stopwatch to 0:00
    b) During a counting event: press D to see a "split" time (IE first leg of a relay time is shown while the counting event continues, press D again to return to running counting event; press C at end of event, press D to reset stopwatch to 0:00
    2) press B to return to normal time mode

    Mar 27, 2009 | JCPenney Watches

    1 Answer

    Casio G-Shock alarm not working


    The alarm should be sounding. (broken?) To turn hourly chime on and off, go to alarm screen and select SIG. Then top left button turns it on and off.

    A -- B
    ( ) Button reference
    C __D

    6) Hourly Chime (SIG):
    Press C until alarm mode is reached (AL1 - AL4 + SNZ and SIG).
    Press D to select hourly chime (SIG). Press A to toggle chime on and off.

    Press C to return to Timekeeping mode.

    Good luck,
    Techjoel

    Feb 04, 2009 | Casio G-Shock GW300CA-1V Wrist Watch

    1 Answer

    Dont know how to turn on hourly chime timex atlantis 100


    Set chime and Alarm on or off

    Press MODE to select ALARM
    Press START/SPLIT to change (clock sign and chime sign will appear and disappear as you keep on pressing).
    Press MODE again and you are all set.

    Dec 28, 2008 | Timex Atlantis 100 77517 Wrist Watch

    Not finding what you are looking for?
    Watches Logo

    Related Topics:

    125 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Watches Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18408 Answers

    Ansel Alberto
    Ansel Alberto

    Level 2 Expert

    248 Answers

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Are you a Watch Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...