Question about Disney Cars Ramone DVD Player

Open Question

Need the 5 digit code and its not 00000 or 99999

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Need Comcast 5-digit universal remote code for Sony BDP-S3100

Find Your Comcast Remote Control Programming Code
make sure your using those codes with the AUX button. Comcast does not have all remote codes for every electronic made though.

Feb 05, 2014 | Comcast Custom DVR 3 Device Universal...

1 Answer

Need new remote

If you wish to buy a genuine remote control, you have to contact the authorized service center. If you wish to buy a universal remote control, you should know about, which brand remote control have set-up codes to your TV brand, and buy that one according to availability. The first thing you have to do is, to confirm the number of digits in the setup codes to your TV brand. There are 4 digit, 5 digit, 3 digit and even 2 digit codes. You can make it sure by entering '0s' at the code enter window the TV dispays, and asks codes. Enter 'Zeros', and count how many zeros can be enterd. That number will be the number of digit of setup code, the TV/Device need. If you can enter 5 zeros, the number of digit in the set-up code to your TV is a '5' digit one, if only 2 zeros can be enterd, the number of digits in the set-up code to your TV should be a 2 digit one, and so on.. If you wish to get more details about this, try the sites linked here.
Both the sites have setup code list, and setup procedure to many popular brand remote controls. Check the site in 'Mosaic' view. It will make search easy.

Jan 20, 2014 | Vizio Televison & Video

1 Answer

My polaroid tv has a v-chip i need to how fix it. i need a code


If your device does not respond to the remote after trying all codes listed for your brand, or if your brand is not listed, try

searching for your code:

1. Press a device key once.

2. Press and hold SET until the red LED blinks twice; then release.

3. Enter 9-9-1, then the device group number (0= Cable, 1= TV, 2= VCR, 3= Audio). The LED blinks twice.

4. Aim the remote at the device and press Power. The remote sends IR codes from its library to the selected device,

starting with the most popular code first. If the device responds, go to step 7.

5. If the device does not respond, press CH+. The remote will try the next code. Continue until the device responds.

Note: Press CH- to try the previous code.

6. To search for other device codes, repeat steps 1 to 5.
7. Press SET to save and exit.

If you have set up the remote using the procedure in "Searching for Your Code", you may need to find out which four-digit

code is operating your equipment.

For example, to find out which code is assigned to your TV:
1. Press TV once.

2. Press and hold SET until the red LED blinks twice; then release.

3. Enter 9-9-0. The LED blinks twice.

4. To view the code for the first digit, press 1. Count the LED blinks (for example, three blinks = 3), and write down

the number in the appropriate code listing in step 8 under "Programming a Device".

NOTE: If a code digit is 0, the LED does not blink.

5. Repeat step 4 for the four remaining digits, using 2 for the second digit, 3 for the third digit, 4 for the fourth digit,

and 5 for the fifth digit.
6. To check for other device codes, repeat steps 1-5, substituting the device key for TV

Mar 18, 2011 | Polaroid FLM-3232 Television

1 Answer

Trouble Codes

1. VW VAG type 5 digit fault code 19497 = EOBD type P3041 fault code:
Fault location = CAN data bus, instrumentation - implausible Engine Coolant Temperature (ECT) signal
Probable cause = Wiring, matching resistor in Engine Control Module (ECM)

2. VW VAG type 5 digit fault code 18032 = EOBD type P1624 fault code:
Fault location = Malfunction Indicator Lamp (MIL) - request signal active
Probable cause = Trouble code(s) stored in other system(s)

3. VW VAG type 5 digit fault code 01039:
Fault location = Coolant Temperature Sensor (G2)
Probable cause = Open or Short to Plus, Short to Ground - Intermittent

4. VW VAG type 5 digit fault code 01304:
Fault location = Radio
Probable cause = No Communication

5. EOBD type P0761 fault code:
Fault location = Shift Solenoid C
Probable cause = Performance or Stuck OFF

Feb 03, 2010 | 2002 Audi A4

2 Answers

Cant find key code for my 1997 mercury sable

Only a mercury dealer will be able to help you, they will need the vin number of the vehicle to find it for you.

Mar 06, 2009 | 1997 Mercury Sable

1 Answer

Keyless entry keypad

retrieving is probably not an option however if you know the factory code , you can add 1 personal code which in turn would erase any other personal codes . your owners manual should back this statement up . follow these steps >>>>>

The keyless entry touch pad can use two codes. The factory code and one
personal code .
To program your own personal code, select a 5 digit code that doesn't use 5 digits in
sequence or the same button 5 times.
Enter your factory code
Within 5 seconds press the 1/2 button
Within 5 seconds of pressing the 1/2 button, enter your 5 digit personal code,
pressing each digit within 5 seconds of the previous digit.
You can now use either code to operate the keypad

Jan 12, 2009 | 2003 Ford Expedition

Not finding what you are looking for?
Disney Cars Ramone DVD Player Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Disney Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75581 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers


Level 3 Expert

508 Answers

Are you a Disney Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides