We have a bkr-400c.purchased at Costco in Medicine Hat AB about 1 month ago. We made a loaf of bread and took it out. Turned power off and then made another loaf. Tried to turn it back on without success. Is there a fuse in the unit that may have gone out. If so how do you access it?

T1A 5V3

4-1023 ALLOWANCE AVE SE
MEDICINE HAT AB T1A 8A9

Go to Post Canada web site and click the tab Find a postal code, then in the search area type in the full address.

www.canadapost.ca

Next time follow the same recipe but remove 2 TBSP of liquid from your measuring cup before putting it in the pan

That is a feature on your bread machine that prevents you from starting a loaf of bread when the oven is too hot fro the last loaf. You need to open the lid, leave it open for 30 minutes then bake your next loaf.

Bread pan Capacities

Here is how you determine the size of loaf you can bake in your machine. You need to determine the capacity of your pan. Fill your pan with water and measure the cups added so you know how many cups of water are in the pan when it is full to the very top. Here are the conversions:

1)If your pan holds less than 10 cups of water you can make: a 1 pound loaf

2)If your pan holds 10 cups of water you can make: a 1 pound loaf and a 1.5 pound loaf

3)If your pan holds 12 cups you can make: a 1 pound, 1.5 pound, and a 2.0 pound loaf

____________________________________________________________________

This is rare, but if you pan holds 14 cups or more you can make all the above plus a 2.5 pound loaf

FROM ANOTHER SITE:

To find your bread machine pan size:
Fill the bread pan with water and measure it out in cups
Less than 10 cups of water = 1 pound
11-13 cups of water = 1 1/2 pounds
More than 13 cups of water = 2 pounds

The Teflon coating on the inside of the pan has worn. You will need a new pan and probably also a paddle. In the meantime you could try spraying the inside of the pan with cooking oil prior to each use.

Here's a good basic white bread recipe that works great with a BD2550 (and usually doesn't even **** the mixing blade off of the bottom of the machine)

1 cup warm (not hot) water
1/3 cup milk
1 tablespoon sugar
1 teaspoon salt
1 1/4 tablespoons butter/margarine
4 cups flour
1 teaspoon yeast

Heat the water and add the milk to it. Dissolve the sugar and salt into this mix and pour the liquid into the bottom of the bread maker bucket (make sure the mixing blade is already in). Melt and add the butter to this mix. Add the 4 cups of flour directly on top, but do not mix it in. The flour will float on top of the liquid. Make a small dimple in the top of the flour in the middle with your finger and add the yeast into that little crater (at no point while adding ingredients do you let the yeast touch the liquid). Set the bread maker for basic setting 1, light crust, 2lb loaf and let it do it's thing. 3 hours later, you'll have a nice loaf of white bread with good consistency and density, and it usually leaves the mixing blade in the bucket (rather than having to dig it out of the loaf after).

Hope this helps!

Sounds like my exact problem. I bought in an antique store (here in Vcr-Canada) an un-used machine. Home-line "Home Bakery" Mod.CBM-5511.
1-lb loaf capacity. With lots of auto-settings.
A lady friend at work took it home yesterday and made me a wonderful loaf based on the instructions and recipe for her new Black & Decker model. It all came out Great.
I wolfed that loaf when I got home tonite. I even copied the simple recipe that she used for making the bread and for some other doughs to make buns ect. I'm gonna try it out on my wife soon. I LOOOOVVVVE breads.

We have owned a Panasonic bread maker for ten years and gets used twice a week to make bread using "spelt " flour.About three years ago the bread maker was producing flat loaves,and was very heavy.We contacted bread making company called "Simply No Knead"and asked for there advise,as we were following the same recipe and method for around six years. They suggested that we add a little more water,and this would fix the problem.We tried this and the bread still failed to rise,so we rang them again .This time they said that we need a new bearing in the bread maker and that would fix it.We did this at a cost of $40 and still no good.This happened over a period of several months.We suggested to them that there must be something wrong with the flour,which they denied.After checking the labels on the packaging we noticed that they were using flour from another country [ I think it was Hungary ],because they had run out of suppies from Australian wheat produces.
The flour was far to old,and bread won't rise if the flour is to old. As soon as they started using Australian produced flour again the bread improved dramatically.

Hope this is helpful to you