Question about Fujitsu Siemens AMILO Pro V2010 Notebook

2 Answers

My dongle works but I can't open any website - Fujitsu Siemens AMILO Pro V2010 Notebook

Posted by on

  • Art Ellison
    Art Ellison May 11, 2010

    You'll have to tell us a bit more. What is the dongle for? Is it a network interface, a modem interface, or what? When you say you can't open a website, what haev you tried and what does it do?

  • TimBernard44 May 11, 2010

    Are the drivers both working and up to date?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 585 Answers

That may be caused by an incorrect gateway setting in the TCP/IP settings for the network connection. If you connect to a router, it would typically be the IP address of the router, ie 192.168.2.1 or a close variant.

Posted on Nov 15, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 32 Answers

This is definetly a software issue

Posted on Nov 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My lenovo keyboard is not working.i have three blinking lights above number lock


Is it a corded or non corded keyboard. Possible problems with non-corded: Dead Battery, no link to USB receiver(dongle) on computer, bad USB receiver (Dongle) on computer. From Lenovo Website:

Keyboard and Dongle Paring:

Auxiliary tools: PC with Windows XP or Windows 7, two AAA cells

Pairing steps:

1. Insert Dongle into PC. Be sure that the Dongle is recognized by PC and the distance between keyboard and the Dongle is within 10cm.

2. Press down F2, F3 and F4 at the same time, install cells, release F2, F3 and F4 and then Press "3" to begin pairing. After finishing pairing, press "Windows" key to check whether the pairing is successful. If "Windows" key works, it means that the pairing is successful; otherwise, the pairing fails.
That was all I could find on the site.
That was all I could find

Sep 22, 2014 | Lenovo Keyboard

1 Answer

GeoVision NVR Software for 3rd Party IP Cameras


Not exactly sure of the question but Geovision does allow for many 3rd party IP cameras to be connected. Check the Geovision website for a full compatibility list. I have personally worked with Hikvision and Vivotek with no issues. You will need to purchase and install a dongle. The dongle comes with software that you will need to install before using the USB dongle. The dongles come in 1, 2, 4, 8 & 16 camera capabilities. There is usually no cost difference to buy two 2 camera dongles or one 4 channel dongle. So get whatever you need. Just be aware that is will look odd having 4 USB sticks protruding from your NVR. There are also some internal dongle options that connect directly to the motherboard.

Oct 10, 2013 | Geovision 32 Channel NVR Software License...

1 Answer

My laptop which has windows 7 on it does not recognize mmy dongle


there is an update for windows 7 and dongles at the husqvarna viking website.

From Husqvarna Viking website -

When installing the 4D Embroidery System onto Windows 7 computers, the dongle drivers may not initially work correctly, as the 4D Embroidery System installs a set of dongle drivers which were created before Windows 7.
Download and install the latest dongle drivers prior to installing the 4D Embroidery System. Failure to do this, may result in the "Dongle driver not found (E0009)" when you try to open the 4D modules.
Please follow the steps below to install the latest dongle drivers BEFORE installing the 4D Embroidery System
  1. Download and install the latest Dongle Drivers.
  2. Insert your 4D Dongle.
  3. Install your 4D Embroidery System software (and all updates).
  4. Open your 4D Embroidery System software to confirm that your dongle is working correctly.
If you installed the 4D Embroidery System software before installing the latest dongle drivers and if you experience problems such as the error message "Unable to start hasplms service..."; download and install the latest Dongle Drivers.

link to latest Dongle Drivers - http://vsmsoftware.net/downloads/HASP/HASPUsersetup.exe

Husqvarna Viking - http://www.husqvarnaviking.com

If you are still unable to get it to work, visit your local authorized Husqvarna Viking dealer. Most stores have staff who are eager to help but you might want to call for an appointment

Good luck..

Feb 13, 2010 | Husqvarna Designer I

1 Answer

Loaded autodigitizing onto our new computer with Windows 7. Everything loaded just fine but when I try to open program it does not recognize the dongle.


There is an update for dongles and windows 7.

Info on Husqvarna Viking website - http://www.husqvarnaviking.com


When installing the 4D Embroidery System onto Windows 7 computers, the dongle drivers may not initially work correctly, as the 4D Embroidery System installs a set of dongle drivers which were created before Windows 7.
Download and install the latest dongle drivers prior to installing the 4D Embroidery System. Failure to do this, may result in the "Dongle driver not found (E0009)" when you try to open the 4D modules.
Please follow the steps below to install the latest dongle drivers BEFORE installing the 4D Embroidery System
  1. Download and install the latest Dongle Drivers.
  2. Insert your 4D Dongle.
  3. Install your 4D Embroidery System software (and all updates).
  4. Open your 4D Embroidery System software to confirm that your dongle is working correctly.
If you installed the 4D Embroidery System software before installing the latest dongle drivers and if you experience problems such as the error message "Unable to start hasplms service..."; download and install the latest Dongle Drivers.

Link to dongle drivers - http://www.vsmsoftware.net/downloads/HASP/haspusersetup.exe

Good luck.

Feb 09, 2010 | Husqvarna Designer I

1 Answer

I have the Husq Pro software for my #1+ machine and I bought a new computer with 64 bit. I can't get it installed. What do I do?


Info on Husqvarna Viking website - http://www.husqvarnaviking.com

When installing the 4D Embroidery System onto Windows 7 computers, the dongle drivers may not initially work correctly, as the 4D Embroidery System installs a set of dongle drivers which were created before Windows 7.
Download and install the latest dongle drivers prior to installing the 4D Embroidery System. Failure to do this, may result in the "Dongle driver not found (E0009)" when you try to open the 4D modules.
Please follow the steps below to install the latest dongle drivers BEFORE installing the 4D Embroidery System
  1. Download and install the latest Dongle Drivers.
  2. Insert your 4D Dongle.
  3. Install your 4D Embroidery System software (and all updates).
  4. Open your 4D Embroidery System software to confirm that your dongle is working correctly.
If you installed the 4D Embroidery System software before installing the latest dongle drivers and if you experience problems such as the error message "Unable to start hasplms service..."; download and install the latest Dongle Drivers.

Link to dongle drivers - http://www.vsmsoftware.net/downloads/HASP/haspusersetup.exe

Good luck.

Jan 23, 2010 | Husqvarna Viking 1

2 Answers

I need a driver for a husquvarna 3D reader/writer card, where can I find one


Info on Husqvarna Viking website - http://www.husqvarnaviking.com

When installing the 4D Embroidery System onto Windows 7 computers, the dongle drivers may not initially work correctly, as the 4D Embroidery System installs a set of dongle drivers which were created before Windows 7.
Download and install the latest dongle drivers prior to installing the 4D Embroidery System. Failure to do this, may result in the "Dongle driver not found (E0009)" when you try to open the 4D modules.
Please follow the steps below to install the latest dongle drivers BEFORE installing the 4D Embroidery System
  1. Download and install the latest Dongle Drivers.
  2. Insert your 4D Dongle.
  3. Install your 4D Embroidery System software (and all updates).
  4. Open your 4D Embroidery System software to confirm that your dongle is working correctly.
If you installed the 4D Embroidery System software before installing the latest dongle drivers and if you experience problems such as the error message "Unable to start hasplms service..."; download and install the latest Dongle Drivers.

Link to dongle drivers - http://www.vsmsoftware.net/downloads/HASP/haspusersetup.exe

Dongle issues - http://www.husqvarnaviking.com/global/8588_4197.htm

Good luck.

Dec 10, 2009 | Husqvarna Viking 1

1 Answer

Husqvarna #1+ Dongle Not working with my computer.


You probably need to install the XP drivers for the dongle. I don't have the exact website at my fingertips (brain tips?) right now, but if you visit Jan Henning's Sew Much 4 Retirement website I think she has it amongst her Tips section. I had a similar problem years ago, but solved it by putting the installation CD into the computer, not running the automatic Install, then opening the program. It then goes looking for the dongle driver on the CD. This solution does not work for everyone, some need to download the drivers off the internet.

May 10, 2009 | Husqvarna Designer I

1 Answer

Cannot open Bernina Software - States Hasp not installed -100 -


More likely the software you have is a corrupt one or is not compatible with windows ME.
However, to be on a safe side, follow the steps :-

 1. Remove the dongle from the USB port.  2. Uninstall the software.  3. Restart the PC.  4. Download the software.
 Make sure that the software is compatible.
 Unless change the CD or download the software from some different website ( In case you are downloading it from a particular website ).
Thanks.

Mar 25, 2009 | Bernina Artista 180

2 Answers

No Dongle Attached Error Msg


You might want to take it to an authorized husqvarna viking dealer for service. You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com
Good luck.

Nov 07, 2008 | Husqvarna Designer I

Not finding what you are looking for?
Fujitsu Siemens AMILO Pro V2010 Notebook Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fujitsu Siemens Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Lee Durbin
Lee Durbin

Level 3 Expert

408 Answers

Marcin

Level 2 Expert

191 Answers

Are you a Fujitsu Siemens Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...