Question about Microsoft Computers & Internet

1 Answer

Windows 7 resolution issues

I've recently installed windows 7 and have a netgear wn111v2 adapter. Had massive issues installing the drivers but got there in the end. The problem I now have is that on restart my screen resolution goes to 800x600 or flashes at me. Had a little look around in forums but no one seems to have the same res issues???? Help

Posted by on

  • Don Temp Nov 15, 2009

    I also have the netgear wn 111v2 adapter. Wouldn't install because of the cd being for xp. They haven't been real quick on the windows 7 software download. I haven't heard of that install causing a video problem. or screen problem. Wondering if that was the cause?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 553 Answers

Windows 7 does not support drivers that you have in your video card or you video card to be more specific, you'll need to download driver for your video card that support windows 7...Windows 7 have this issue all along since it was first release, all the problems goes to drivers issue. i suggest to downgrade again to your first OS before windows 7.

Posted on Nov 15, 2009

Testimonial: "So I need to wait until the correct drivers are available for netgear and ATI? Bummer. Thanks for the advice"

  • Reynante Buenbrazo
    Reynante Buenbrazo Nov 15, 2009

    Yes sir, it will be soon, according to microsoft, it may come up before end of november, just keep monitoring on the updates sir...have a nice day

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a problem installing a Adapter for my Netgear wn111v2 adapter on my HP Compaq Elite 8000. Every time I install it. I get a error message.


quite possibly the two are not compatible . older routers do not like win 7 or win 8 and win10 is even worse

Aug 21, 2015 | NetGear Computers & Internet

1 Answer

Netgear WN111v2 Adapter disconnected


Is the Netgear Wi-Fi Management software installed on the computer? If it is, you may have a conflict between Window's built in Wi-Fi Manager and the Netgear Wi-Fi Manager. If it isn't, you may need to install it.
Assuming it isn't, there's links to download the software at the Netgear Global Download Center.

I would default to the most current version, if you're running Windows XP, you may need to install the v2.1, however, I would assume the v3.1 would be backward compatible with XP.
Install the software and follow the prompts that will guide you through the installation/setup.
Now, if the software is already installed, you need to find the program and configure it through that avenue. If that does not fix the issue, you should uninstall the Netgear software, remove the Wi-Fi adapter and reboot the computer. After it completely boots back up, you should either plug in the Wi-Fi adapter, let Windows recognize it and install the drivers, (they should still be in the system even after you uninstalled the software). Once Windows successfully locates and installs the drivers, reboot the computer again, (no need to remove the adapter). Once Windows completely loads again, open Start, Control Panel, and System. On the resulting window, click the hardware tab at the top then click the "Hardware Manager" button in the middle about 1/3 down the window. Click the "+" next to "Network Adapters" and verify that your WN111v2 is indeed installed.
Assuming it is at this point, close out everything but the Control Panel and open "Network Connections". Find the wireless adapter there, (may be listed as "wireless connection2" depending on how many times it's been installed). Right click on the wireless device and select "Show Available Wireless Networks"

I'm also uploading a video showing what needs to be done.
Establishing WiFi Access in WinXP

Jan 27, 2014 | NetGear Computers & Internet

1 Answer

Stuck At Detecting Adapter


Disconnect it, remove any software that was installed and restart the computer. Do not connect the device until you finish installing the device's software or the software installation prompts you to connect the device.
If that doesn't work, here's Microsoft's solution:
http://windows.microsoft.com/en-us/windows-vista/update-a-driver-for-hardware-that-isnt-working-properly
If that doesn't work, go to Netgear's website for support and/or post the problems in the forums.
I hope this helps.

Dec 19, 2012 | NetGear WNA1100 Wireless-N 150 USB Adapter...

2 Answers

Hi! I'm using Windows 7 OS. Also i have NETGEAR Wireless-N 300 JWNR 2000 router, which has been setup and running fine. Now i'm trying to setup NETGEAR Wereless-N 300 USB adapter WN111 and i...


Hello antonhs2000,

I assume you went through the direct instructions located HERE. It does not suggest a restart anywhere on the page, so I would suggest doing that. I have always made it a habit to restart my computer after uninstalling drivers and installing drivers as well just to be safe.

May 29, 2011 | NetGear WN111 (DHWN111100NAS) Pre-802.11n...

1 Answer

I am currently running internet on a NetGear wireless WG111V3 adapter and I am trying to install the NetGear wireless WN111V2. As far as I know I have all of the correct drivers and also updated Windows...


1 Download using the button below to a convenient place such as your desktop.
NOTE: After downloading, DO NOT RUN THE FILE YET. Please proceed to Step 2.

Download Link

2. To properly install adapter software, please remove drivers that were previously installed.
To uninstall, go to Start > Programs > NETGEAR WN111v2 adapter > Uninstall NETGEAR WN111v2 adapter or through ADD/Remove program

3. Unplug the WN111v2 adapter from your computer.

4. Run the file you just downloaded and follow the on-screen install instructions.

Mar 01, 2011 | NetGear WN111 (DHWN111100NAS) Pre-802.11n...

1 Answer

My adapter wireless N WN111v2 is not found


When I insert the adapter WIRELESS N WN111v2 during installation, a message said me : your adapter wirreless is not found !! Help me please

May 08, 2010 | NetGear WN111 (DHWN111100NAS) Pre-802.11n...

1 Answer

I don't have the cd for the wn111v2, when i plug in it won't detect hardware, i now the device works, i plugged into my computer and work and it started right up.


If you are facing trouble with the installation of the adapter WN111v2 then please visit the below link to download the drivers:

WN111v2


Install the adapter using these drivers and configure the wireless connection.

Hope this helps.

Regards

Anand

Mar 25, 2010 | NetGear WN111 (DHWN111100NAS) Pre-802.11n...

1 Answer

I have a netgear wn111v2 adapter. I tried installin the software which i downloaded from the the netgear site....when i doubleclick the smart wizard...the window flashes and disappears...I'm using a...


1. Try deleting Cookies, Temp Files and restart computer
2. Download the files again and try installing it.
3. Still Same Issue, try different browser.
4. Still no Luck, Restart computer in safe mode with networking and download the software again.
Good Luck

Mar 10, 2010 | NetGear WN111 (DHWN111100NAS) Pre-802.11n...

1 Answer

Wn111v2 not recognised by windows 7 - Is there an easy way to fix this yet?


Please download the driver available for the adapter for windows 7 from the below link:
http://kb.netgear.com/app/answers/detail/a_id/12656
I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Regards Anand

Feb 19, 2010 | NetGear WN111 (DHWN111100NAS) Pre-802.11n...

1 Answer

Netgear WN111v2 software won't install


Hi, Visit the link below to download the latest drivers for the adapter:

http://kb.netgear.com/app/answers/detail/a_id/7528

Install the adapter using these drivers and configure the wireless connection.

I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Regards
Anand

Sep 27, 2009 | NetGear WN111 (DHWN111100NAS) Pre-802.11n...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2658 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...