Question about Lexmark Z611 InkJet Photo Printer

1 Answer

The carrier stall snaps back and forth. I am not seeing any obstruction. Please advise

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a similar problem... i know what is causing it, but i don't know how to fix it. you should be able to see a clear plastic strip toward the rear whenyou open the cover. It might look grey, but if you look closely, you'll see that it is clear w/ fine lines printed on it. My infant son removed this part and now our carriage zips back and forth "snapping" as it hits the ends. My guess is that this strip acts as a sort of registration or positioning guide. I just can't figure out how to properly re-install it so that it is "read" by the carriage as it moves back and forth.

Posted on Dec 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lexmark 4200 error code 1200


Hi. Please follow the procedure below on how to resolved this issue

Hardware Error: 1200

The All-In-One is stalled.

1. Press Power to turn off your all-in one.

2. Unplug your all-in-one fro the wall outlet.

3 Check for paper jams.

4 Plug in your all-in-one

Cartridge Error: 1200

The cartridge carrier is jammed.

1. Turn off you all-in-one

2. Unplug the all-in-one form the wall outlet.

3. Open the control panel.

4 Open the cartridge access door

5. Make sure the cartridges are snapped in place in the carrier.

6. Check for objects obstructing the carrier.

7. Plug in your all-on-one

8. Press power to turn your all-in-one back on.

Jul 07, 2010 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Error #1200----help cannot receive Fax but can send them


Hi There

Hardware Error: 1200

The All-In-One is stalled.

1. Press Power to turn off your all-in one.

2. Unplug your all-in-one fro the wall outlet.

3 Check for paper jams.

4 Plug in your all-in-one

Cartridge Error: 1200

The cartridge carrier is jammed.

1. Turn off you all-in-one

2. Unplug the all-in-one form the wall outlet.

3. Open the control panel.

4 Open the cartridge access door

5. Make sure the cartridges are snapped in place in the carrier.

6. Check for objects obstructing the carrier.

7. Plug in your all-on-one

8. Press power to turn your all-in-one back on.

Hope this resolves your issues.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on Helping.
All The Best: Pineworks

Feb 01, 2010 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Lexmark X4270 shows error message #1200 and to consult User Guide. We do not have one and do not know what error #1200 is.


Hardware Error: 1200

The All-In-One is stalled.
1. Press Power to turn off your all-in one.
2. Unplug your all-in-one fro the wall outlet.
3 Check for paper jams.
4 Plug in your all-in-one

Cartridge Error: 1200

The cartridge carrier is jammed.
1. Turn off your all-in-one
2. Unplug the all-in-one form the wall outlet.
3. Open the control panel.
4 Open the cartridge access door
5. Make sure the cartridges are snapped in place in the carrier.
6. Check for objects obstructing the carrier.
7. Plug in your all-on-one
8. Press power to turn your all-in-one back on.

That's all the information I could find.

Jan 15, 2010 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

What is error #1200 mean.


Hardware Error: 1200

The All-In-One is stalled.

1. Press Power to turn off your all-in one.

2. Unplug your all-in-one fro the wall outlet.

3 Check for paper jams.

4 Plug in your all-in-one

Cartridge Error: 1200

The cartridge carrier is jammed.

1. Turn off you all-in-one

2. Unplug the all-in-one form the wall outlet.

3. Open the control panel.

4 Open the cartridge access door

5. Make sure the cartridges are snapped in place in the carrier.

6. Check for objects obstructing the carrier.

7. Plug in your all-on-one

8. Press power to turn your all-in-one back on.

Hope this resolves your issues.

Oct 02, 2009 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Error #1200 appears on screen


Hardware Error: 1200

The All-In-One is stalled.

1. Press Power to turn off your all-in one.

2. Unplug your all-in-one fro the wall outlet.

3 Check for paper jams.

4 Plug in your all-in-one

Cartridge Error: 1200

The cartridge carrier is jammed.

1. Turn off you all-in-one

2. Unplug the all-in-one form the wall outlet.

3. Open the control panel.

4 Open the cartridge access door

5. Make sure the cartridges are snapped in place in the carrier.

6. Check for objects obstructing the carrier.

7. Plug in your all-on-one

8. Press power to turn your all-in-one back on.

Hope this resolves your issues.

Jul 20, 2009 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Carrier stall


the carrier is the carriage tat holds the ink, it rides on a steel bar back aand forth open up unit t o see if it is stuck

Feb 05, 2009 | Lexmark X7170 All-In-One InkJet Printer

1 Answer

Carrier Stall is the error


Hi,
Please do the following..

To check the cartridge carrier:
  1. Unplug the printer.
  2. Move the cartridges to the left by hand and then take them out.
  3. Try to print without the cartridges in the carrier. Do you still receive a Carrier Stall error message?
  4. If not, put the cartridges back into the carrier and snap them in at the back. The message should no longer appear.
If the power light on the printer is not blinking, the error message may be caused by a communication error. Do the following:
  1. Remove any other devices attached to the USB/LPT port.
  2. Uninstall the Lexmark printer.
  3. Connect the printer directly to the PC and ensure that power is being supplied to the printer.
  4. Reinstall the printer.
Thank you....

Jan 26, 2009 | Lexmark X83 All-In-One InkJet Printer

3 Answers

Printer carrier stall


I am getting a "Printer Carrier Stall" message and "Check printer for obstruction" message. what can I do to fix it?

Oct 03, 2008 | Dell 966 All-In-One InkJet Printer

1 Answer

Error #1200


Hardware Error: 1200

the printer is stalled.

1. Press Power to turn off

2. Unplug your printer from the wall outlet.

3 Check for paper jams.

4 Plug in your printer

2nd option Cartridge Error: 1200

The cartridge carrier is jammed.

1. Turn off you all-in-one

2. Unplug the all-in-one form the wall outlet.

3. Open the control panel.

4 Open the cartridge access door

5. Make sure the cartridges are snapped in place in the carrier.

6. Check for objects obstructing the carrier.

7. Plug in your printer

8. Press power to turn it back on. you can equally check this link for full and detailed description of the problem and solution http://support.lexmark.com/cgi-perl/knowledgebase.cgi?ccs=229:1:0:439:0:0&emeaframe=&docid=ENUS23485

Hope this resolves your issues.

Sep 09, 2008 | Office Equipment & Supplies

1 Answer

Lexmark x83 carrier stall


http://support.lexmark.com/cgi-perl/knowledgebase.cgi?ccs=229:1:0:95:0:0&framed=&docid=ENUS22722&relevance=0
Use the above link to trouble shoot the problem.

Error: "Carrier Stall" ID:470

To check the cartridge carrier:

1. Unplug the printer.
2. Move the cartridges to the left by hand and then take them out.
3. Try to print without the cartridges in the carrier. Do you still receive a Carrier Stall error message?
4. If not, put the cartridges back into the carrier and snap them in at the back. The message should no longer appear.

If the power light on the printer is not blinking, the error message may be caused by a communication error. Do the following:

1. Remove any other devices attached to the USB/LPT port.
2. Uninstall the Lexmark printer.
3. Connect the printer directly to the PC and ensure that power is being supplied to the printer.
4. Reinstall the printer.

Feb 24, 2008 | Lexmark X83 All-In-One InkJet Printer

Not finding what you are looking for?
Lexmark Z611 InkJet Photo Printer Logo

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...