Question about Canon PowerShot G9 Digital Camera

Open Question

When I turn on my Canon G9 Camera, I do not get a display on my LCD display. Also when I take a picture through the veiwfinder, I here the camera take the picture, but does not register on my memory stick. Need some information to make this camera work. Stan Wereschuk email: aeronaut@telus.net

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

t00nz
  • 4738 Answers

SOURCE: Cannon PowerShot A85

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

Posted on Feb 18, 2008

  • 1 Answer

SOURCE: My Canon Powershot A560 memory

Remove the memory card from the camera. Note that there is a small slide switch on one of the long edges of the card. Slide the switch to unlock or lock the card.

Posted on Jul 14, 2009

tennisplay
  • 4 Answers

SOURCE: hello..my canon g9 is reading 'no memory card'

Have you tried blowing air in the memory card part of the camera? Might be dirty! If that doesn't work, look for a repair shop, a popular one for the Canon Powershot cameras is camerasandparts.com since they only work on the powershots. They tend to be the place if you need help with one of these. They don't charge much at all and they do all the service on the camera too. Go to that site and you'll see they have your specific problem posted right there for your G9. Good luck with it.

Posted on Jan 09, 2010

willsam29
  • 10 Answers

SOURCE: Canon G9 - camera went dead - battery is good - no

Camera was probably shorted out by a common loose screw problem on this model. If you go to: www.camerasandparts.com they specialize in Service for the Canon Powershots and they are amazing if you need service for one of these. They actually have this exact no power problem on their site for your model so you can get it taken care of for very little and have the camera serviced up completely. They also include the correction so this problem never comes back again. Try that site, that's where a lot of people go for help with the Powershots, good luck

Posted on Apr 03, 2010

toddarmstron
  • 4 Answers

SOURCE: Canon G9 stopped working

Your camera probably got the loose screw syndrome that these G7 and G9 models many times get. It needs to be repair and should be done professionally, mostly it's a board inside that has to be replaced. The correction to the screws inside of the camera should also be done, it costs $89 for everything at this site: www.camerasandparts.com They're excellent for fixing this problem since they are familiar with it and they include the correction automatically so the screws won't come loose again. Plus if it's something else causing the no power syndrome, it's still the same price with them. The work there is excellent and a plus is they only work on Canons, they are very familiar with this G9 problem.

Posted on Oct 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Canon G9 review function does not work. It flashes the last picture taken only.


It is not the problem with the camera. When the last picture is displayed, you can turn the control dial (the vertical ring around the four-way directional buttons) or use the right and left arrows to navigate to the previous or next image.

Aug 26, 2010 | Canon PowerShot G9 Digital Camera

1 Answer

Dear experts! i have a G9 powershot camera, and yesterday i have encounterd a problem.....the screen is not showing any image and i have checked and it is not the display button...it's like trying to take...


If it takes normal pictures even with the black display, your LCD display is likely shot. If photos come out black, chances are that your shutter is stuck in the closed position. Sorry, but there is no safe DIY fix for either problem The camera will require professional repair.

Nov 15, 2009 | Canon PowerShot G9 Digital Camera

2 Answers

I have no image in the viewfinder on a canon S2 IS but the lcd display works and it seems to work fine otherwise. What are the likely causes?


There is sometimes a button on digital cameras that turns off the LCD while taking pictures to save battery. Does your camera have a viewfinder? If it does then there might be a button that looks like a little screen or says "disp" or something like that.

Jun 12, 2009 | Canon PowerShot S2 IS Digital Camera

1 Answer

Black screen


some cameras for the option to see a what your going to picture in either the viewfinder or the lcd if you have a veiwfinder check in the menu that its set to view through LCD if you want to use the LCD

Mar 24, 2009 | Canon PowerShot S2 IS Digital Camera

1 Answer

Canon S2 IS problem blank viewfinder and LCD


some cameras have the choice to take the picture by looking through the veiwfinder or on the LCD screen. check in the menu and set it to LCD if you want to use the LCD

Mar 21, 2009 | Canon PowerShot S2 IS Digital Camera

1 Answer

Canon G9 - image disappears


If you go to display and click down to "review" you should be able to set the review time to what you would like. The default may be 102 seonds. This should work and check the manual

Jan 11, 2009 | Canon PowerShot G9 Digital Camera

1 Answer

LCD screen is black while the picture is taken


i think u have turned on the optic view finder mode. so the camera switch off the LCD so go to menu and search for the option to enable the LCD or to disable the optic viewfinder ok.

Sep 22, 2008 | Canon PowerShot G9 Digital Camera

2 Answers

Canon S215 viewfinder and lcd display screen blk


It may be fixable, but it may be expensive. You also have the option to upgrade your camera through Canon's Loyalty program. I'd give them a call and find out what your options are before going out and purchasing a new camera.

Apr 11, 2008 | Canon PowerShot S2 IS Digital Camera

Not finding what you are looking for?
Canon PowerShot G9 Digital Camera Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

168 Answers

old marine
old marine

Level 3 Expert

1972 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...