Removed radio from my vt commadore to fix air con button when i put all beck together radio has power but screen is blank can anyone help

SONIQ LCD TV REPAIR Blank flickering screen Energy ...

? 1:32
https://www.youtube.com/watch?v=FUqdi7lwmcE
May 29, 2013 - Uploaded by WastedOne2
Fix ya Soniq Tv once loaded up hit menu button then channel + then ... SONIQ LCD TV REPAIR Blank flickering screen Energy Saving Mode Issue ... Easiest TV repair - How to Fix Power [TV turns off, freezes, or won't turn on] ... Common easy LCD TV fix: bad picture screen rainbow colors - Duration: 4:04.

No Image & Blank Black Screen Flashlight Test - YouTube

? 5:56
https://www.youtube.com/watch?v=xUzCLgoSPGM
Sep 15, 2014 - Uploaded by ShopJimmy.com
LCD & LED TV Repair - No Image & Blank Black ScreenFlashlight Test - How to Fix LCD & LED TVs ... Most LED TVs will have a t-con board, a power supply board, a main board and an LED ..... SONIQ Australia 1,718 views.

Soniq PT42SH plasma TV power on. No back light and no ...

Look at the website shopjimmy.com. They have trouble shooting videos to determine if it's power supply, led driver, led strip, or t con board.

change the battery's or charge the battery

hi,you need to remove the engine head and fix it.and install need gaskets.

yes but it means removing the exterior part also by undoing the anti tampering bolt on the clamp that holds the whole barrel to the steering column and replacing the assembly

i need a code for the radio the model is 1996
im guessing its a commadore vt look in the drivers manual for a hand writing code or call the dealer they can help it, will cost you

Ooh, blanks WHITE screen normally means there is a hardware break, try putting it into recovery mode:
Hold the Power and Home buttons together for 10 seconds, release the power button and continue holding for another 5 seconds, then plug into iTunes and restore it.
If that doesn't work I hope you have warranty because it'll be a hardware error :(
Sorry I ccouldn't have better news!
Thomas

I also had the white screen / blank screen problem on my Inno today.  I powered the unit off, removed it from the home cradle, and then popped out the battery for about 15 seconds and put it back in.  This fixed the problem.

This has happened to my radio several times after I've dropped it. This is how I fixed the problem:

1) Take the radio out of the cradle and let it play until the battery runs low and
the radio can no longer play.

2) Put the radio back into the cradle, plug in the power cord. When it comes on
the screen should no longer be blank.

i just changed the bulbs in both commadors vt and vr and now i need a bloody code for the radios,does any one know them?