Question about Hansol 500 A Monitor

1 Answer

Hansol Mazellan 500A is it not compatible with 128MB Video Card?

I just bought a new CPU with Intel Celeron 2.4GHZ with 128MB Video Card on it, and when i hook it up with my Mazellan 500A monitor, the LED LIGHT turns green and then goes to orage(blinking). It does't display anything on the screen just black not even going to window's Xp start up. But I hooked up this monitor to my old PC Intel Celeron 433Mhz with just 32MB Video Card and its working fine!! I also even tested the new one I bought the one which has the 128Mb Video to another Monitor (the monitor of the person who sold me that) and its working fine!! This really drives me crazy... HELP!

I hope someone can save me from buying another monitor!


Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,042 Answers
Re: Hansol Mazellan 500A is it not compatible with 128MB...

Your monitor does not support the screen resolution that your windows install is set to. hook your pc back up to your computer guys monitor, and reduce the screen resolution, then hook it back up to your monitor.

Posted on Mar 11, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

In 2004 I bought a monitor Hansol 930 D model, (model no.D19BL, s/n A23490411020263) Since 2011, horizontal image began to narrow, now horizontal image H-size is 210 mm. vertical image size is ...

The horizontal deflection coil is shorted. There is no way to fix that, the entire tube would have to be replaced and that would cost as much as a new monitor.
Just buy a second-hand LCD monitor from here
Asta l-am luat eu si are o imagine excelenta.

Jul 01, 2011 | Hansol Europe 930D 19" CRT Monitor

1 Answer

I am using Hansol 730E monitor and recently it start to make slight vibes on screen in horizontal way. I tried to change refresh rate and its no good. I tough that it is magnetic field but i moved monitor...

Being a rare tube monitor i am inclined to say it is nearing end of life. You have done the right thing by moving around unless you are moving other magnetic or power source items with it. Have you tried connecting to another computer - subbed out cables to eliminate that issue? testing on another computer who help determine if monitor or not. might be video card??/ since you are having DX issues I would start there. There is not much more you can do that is not dangerous - ie - increasing the voltage etc..

Jun 13, 2011 | Hansol 730E 17" CRT Monitor

1 Answer

Hi, My Hansol H550 used to come on when my PC tower was booting up, but now I have to press the green on/off button. BUt unfortunately, after pressing the on off button the screen only comes on for a split...

Sounds like there is no input to the monitor. Check the video cable(the one with the screws). Even if it looks plugged in, unplug it and replug it at both ends.

Feb 27, 2011 | Hansol H550 15" LCD Monitor

1 Answer

Hansol 730e , power led on , no display

check the cable connected on your monitor, see if this is fix and secure, on the other end of the cable, see also if this is properly connected to the video card.

If there is still no display, then my suggestion is you bring the monitor to a credible technician, and see if warranty is still available.

May 26, 2010 | Hansol 730E 17" CRT Monitor

1 Answer

My hansol 700Fs silver just blacked out one day. it shows no sign of life even with the mains connected. is there a fuse in there somewhere, or is it just dead?

Try remove the video cable from the CPU, if there's a sign of anything(warning,etc), try it in another CPU, this should works.
And the problems is in Video Card from the CPU.Try replace this Video Card.

Dec 08, 2009 | Hansol 700 FS 17" LCD Monitor

1 Answer


open the monitor you will look big black part called EHT you will see the movable shaft on it rotate it by screw driver in active supply monitor see on screen suficient brightness and stop you will be satisfied

Nov 21, 2008 | Hansol 500 A Monitor

1 Answer

No display in monitor

Was the monitor tested, that it is working before it was delivered to you? Because it was still under warranty. If your system unit open ( a beep sound hear ) wihen your new monitor was attached only that their is no display but the monitor has a power, means it needs a video card with a driver to be installed. If you have another monitor try it to your computer if the problem still the same.
That's all

Nov 19, 2008 | Samsung 510N 15" Flat Panel LCD Monitor

1 Answer

List of hansol computers or monitors support centers in iran

Hansol itself does not support products in Iran directly - your geographically closest service centre is in Turkey, but others may be more convenient; Hope this helps :) من امیداین کمک می کند

Aug 22, 2007 | Hansol 710 D Monitor

1 Answer

Hi all.. i have a problem.

No signal means the monitor is not detecting a signal from the video card. Can you give us a little history about what lead to the problem?

Mar 11, 2007 | Hansol 730E 17" CRT Monitor

Not finding what you are looking for?
Hansol 500 A Monitor Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hansol Computer Monitors Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers


Level 3 Expert

7983 Answers

 Mike M
Mike M

Level 3 Expert

3320 Answers

Are you a Hansol Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides