Question about Garden

1 Answer

It would not crank up so i replaced the filter in the gas tank and seemed to have put it back together right

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 486 Answers

Basics to check:
1) Spark plug - brown or dark brown - OK
a) is it carbon or fuel fouled
b) is there spark

2) Muffler remove for inspection
a) exhaust screen clean or plugged
b) inspect cylinder wall/piston as the flywheel is slowly rotated
3) Check cylinder compression


Fuel starvation - 'lean fuel' condition
Basic things to check:
1) spark plug
2) spark arrestor in muffler
3) fuel lines and tank filter
4) turn adjustment needles out (counterclockwise) 1/4 to 1/2 turn
Chain Saws:
5) check impulse tube and intake boot for cracks or leaks
*if all of the above are OK and/or do not improve performance then:
Remove Carburetor
6) replace gaskets/diaphragms
a) use a spray carb cleaner to clean jets, holes, and body of carb
b) fuel pump diaphragm goes against the carb body,
then the gasket towards the outside
c) metering gasket goes against the carb body,
and the diaphragm goes towards the outside

Posted on Nov 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Why won't my Scotts brand John Deere L1742 start ?.


Check your fuel pump lines in right place

Apr 24, 2015 | John Deere Garden

1 Answer

Carburetor flooding


make sure all filter r clean or new

Jan 07, 2014 | 1990 Toyota Tercel

1 Answer

Ran out of gas, car wouldn't crank replaced fuel pump, fuel relay, and in line fuel filter and still won't crank on 2002 chevy avalanche


still won't crank ? how's your battery ? starter ? starter solonoid ? if your engine does'nt crank , its dead ! would'nt you check the battery first ? then move on with checking the starter circuit ? seems like your putting the cart before the horse ! first of all, when you run out of gas, you need to replace the FUEL FILTER, your engine just sucked the dirt, garbage, etc., out of the tank. there's plenty of sediment in the tank, don't know how it gets there, but, you'd be surprized ! talking threw experience !!! I operate heavy equipment, its a cardinal sin to run out of fuel !!! you say you replaced the inline filter, which one, up by the engine or the main filter, under vehicle along frame ? are we talking about the same animal, PLEASE CLARIFY !

Mar 14, 2013 | 2002 Chevrolet Avalanche

1 Answer

Hobart 10,000 has been sitting for about 3 years and won't start any suggestions?


I know this is an old post, but I just had this same situation. Inherited a unit from my father in law and it had be sitting about a year. I drained the gas tank (disconnect fuel line and pressurize tank inlet with shop vac) and flushed out fuel lines and replace fuel filter, air filter, oil and filter. Cleaned and lubricated all carb and choke mechanisms. Sprayed a bunch of carb cleaner and let it soak. Put in fresh gas. Cranked and cranked and cranked. Did not start right away, but stuck with it. I put some gas in a syringe used for injecting meat (just so you know the size) and remove everything above the carb venturi. Put about 1 cc of gas directly in the carb and cranked. it started and ran until that gas burned up (about 2 seconds). It ran ok but wasn't getting fuel so I suspected the fuel pump. Kept at it and repeated this about 15 to 20 times and noticed that it would run just a wee but longer each time. Until finally it caught and ran strong. Put everything back and it is in great shape. Hope that helps. Also, I noticed there was quite a bit of moisture in the muffler. This sputtered out until it got out enough to evaporate it all out. I now keep it covered when not in use - something I am not sure my father in law did.

Nov 14, 2010 | Hobart Welders 500433 Champion? 10,000...

1 Answer

I have to open the gas cap in order for the car to crank up. It seems as if the no gas is getting to the motor until I open the gas cap & then the car will crank right up? How can I fix this?


sounds like a restriction in the fuel system or a bad fuel pump, likely suspect is the fuel filter or a dented fuel line, replace filter and replace gas cap with one that allow air to get in to the tank

Jan 23, 2010 | 2004 Infiniti M45

2 Answers

My lawnmower will start but will not continue to run. How can I fix this problem? The gas is new and the oil is changed. It is clean underneath. Is this a carburation problem and how can I find the...


Probably some kind of fuel supply problem. You may have an inline filter between the tank and the carburetor. That filter could be pugged.

Also if the mower has been sitting for a coating sometimes called 'varnish" can develop on the jets in the carburetor. If the mower is starting its getting fuel flow..... if it won't stay running its because the fuel supply stopped

Jul 14, 2009 | Garden

1 Answer

Stihl chainsaw


Hi

First remove the cover,air filter and the carburator.Then remove the gas tank cap and the fuel filter from inside of gas tank,at the end of fuel line.Take off the fuel line from the hole of the gas tank(at the top),replace the fuel line,put all back together and start the engine.

best regards savumihai71

Feb 13, 2009 | Husqvarna Chain Saw 20" Bar

1 Answer

Grand am gt 2000 3.4 liter,,,fule pump or filter


you need to check to see if you have fuel pressure at fuel rail.if not suspect the fuel pump .if you do have fuel pressure replace the crank sensor.located by passenger side. behind crank pulley

Jan 30, 2009 | 2000 Pontiac Grand Am GT

Not finding what you are looking for?
Garden Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers

john h

Level 3 Expert

12128 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...