Question about Logitech Cordless Desktop EX110

1 Answer

Mouse not working

The keyboard works fine, but the mouse isn't working. I can see from the lights that the devices seem to be responding to each other, the receiver lights react when i hit the Connect button on the mouse, but the onscreen pointer doesn't react. I installed the SetPoint software that came with the product twice, but maybe there is some driver issue or Windows (XP service pack 2) config problem?

Posted by on

  • 4 more comments 
  • cthom080 Jan 09, 2008

    Same problem

  • Anonymous Feb 10, 2008

    mouse not working

  • Anonymous Mar 20, 2008

    same problem

  • rlstanfield Mar 21, 2008

    MY KEYBOARD WORKS & CONNECTED FINE, HOWEVER MY MOUSE WILL NOT CONNECT..

  • aseri Mar 25, 2008

    I have a Logitech EX90 wireless keyboard and mouse. my keyboard is working good but my keyboard is not working. No installation CD came with it. I have Windows XP Sp2 and windows cannot detect driver for HID complaint mouse drivers. On startup it says that searching drivers for HID compliant Mouse then it ends up with error that windows cannot find drivers for the device.

  • Anonymous Mar 25, 2008

    yup

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 108 Answers

First try uninstalling the Setpoint software. Xp should have a native driver for your mouse. If that does not work check to see (at the Setpoint website) if they have an undated driver. Download and do it again. You might also want to run scandisk just to make sure you do not have a cross linked file before going anything else.

Posted on Jan 24, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Green light on USB for wireless mouse not constant/working


Look on the mouse itself or on the USB stick and see if there is a small button. Press the button once and see if the mouse respondes. If not push it again until the mouse starts towork. This will match or pair the USB reciever to the mouse.

Feb 09, 2010 | Belkin DBF8E825USB Mouse

1 Answer

Key board will not respond. Mouse works fine.


Normal 0 Make sure the batteries are good then try the following.


Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

If the MOUSE isn’t working, push the small RESET/CONNECT button on the back of the mouse to connect to the receiver. Then they should work okay.
Hope this helps. Bud

Dec 07, 2009 | Computers & Internet

1 Answer

Microsoft Laser Mouse 5000 stopped working altogether


Make sure the batteries are good and then follow these instructions.

Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

If the MOUSE isn’t working, push the small RESET/CONNECT button on the back of the mouse to connect to the receiver. Then they should work okay.
Hope this helps. Bud

Sep 11, 2009 | Microsoft Wireless Laser Mouse 5000

1 Answer

New mouse/batteries won't connect with receiver. Light on receiver flashed for about a minute after pressing the connect button on it, then the light stays on, but the mouse doesn't seem to work. Should...


Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

If the MOUSE isn’t working, push the small RESET/CONNECT button on the back of the mouse to connect to the receiver. Then they should work okay.
Hope this helps. Bud

Sep 05, 2009 | Microsoft Wireless Laser Mouse 5000

1 Answer

Keyboard not responding


Have you tried a USB keyboard and mouse wired.try also to hook up the normal keyboard and Mouse with out any usb devices hooked on the computer

May 05, 2009 | Logitech 967461-0403-PK Keyboard/Mouse

2 Answers

Compaq presario sr2150nx keyboard and mouse wont work


maybe the devices are both defective or you mistakaly plug it to the wrong ps2 port.check its pin.

May 05, 2009 | HP Compaq Presario SR2150NX PC Desktop

1 Answer

Mouse and keyboard are frozen


Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

If the MOUSE isn’t working, push the small RESET/CONNECT button on the back of the mouse to connect to the receiver. Then they should work okay.
Hope this helps. Bud

Nov 09, 2008 | Logitech Cordless Mouse

1 Answer

Keyboard & mouse


Make sure batteries are good in both the Keyboard and Mouse. Then press the button on the Receiver.
Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

If the MOUSE isn’t working, push the small RESET/CONNECT button on the back of the mouse to connect to the receiver. Then they should work okay.
Hope this helps. Bud

Jul 31, 2008 | Computers & Internet

1 Answer

Mouse not responding


Are the batteries good?

Try
Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

If the MOUSE isn’t working, push the small RESET/CONNECT button on the back of the mouse to connect to the receiver. Then they should work okay.
Hope this helps. Bud

May 24, 2008 | Kensington Comfort Type Wireless Optical...

1 Answer

Keyboard and mouse


Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

If the MOUSE isn’t working, push the small RESET/CONNECT button on the back of the mouse to connect to the receiver. Then they should work okay.
Hope this helps. Bud

Nov 29, 2007 | Logitech Cordless Desktop EX110

Not finding what you are looking for?
Logitech Cordless Desktop EX110 Logo

387 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

3015 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...