- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This is a common problem with this TV, but there is an upgrade to correct the CONVERVGENCE circuit problem. If you want to repair this concern yourself: Contact:B&D ENTERPRISES, 1-800-458-6053, www.bdent.com and ask for KIT10 for your Hitachi TV. If you want some else to do the repair for you call an Authorized Service Center. Needs convergence IC's http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220 http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
I fixed mine myself for under 75.00!!! To me it was worth it. I could not afford a new one. Plus the newer LCD/Plasma sets fail in 3-5 years anyway. I bought a complete kit from the folks at www.TvRepairKits.com
loss of green color indications of failure of green crt. or green crt board. replaceing the tube ussaly cost 250 for part. however tube replacement in these set are very labor intensive. involveing removing and complex setup issues. at our shop it around 500 to replace one tube. rhese set ussaly not cost effective to repair unless under warrenty
Good Day, christenand;
It is a repair that will cost from $350.00 to $ 600.00 depending on service company. It's not real easy but not hard for a trained tech. I would suspect that the problem lies in the Convergence circuit. If you call for service make sure you use an Authorized Service Center. Good Luck, big IRISH.
HELLO. it sound's like you have a cold solder problem.!!! what that mean's is that when the set get hot .!!! it lose's it's contack.!!! you might try going over the chassis .!!! soldering the conteck's.!!! with a low watt. solder gun.!!! not over 40 watt's.!!! and use 40/60 rosin core solder.!!! hope this help's you .!!! "GOOD LUCK"
Did you have color problems in past? Most of these sets have convergence problems. Amps goes out. But you should have seen some type of distortion from color, red,blue, green. If no color problems then maybe vertical ouput out or horizontal output bad.