Question about Sony Cyber-shot DSC-S600 Digital Camera

1 Answer

Camera lens of Cybershot 6.0

After turning the camera on, the lens is out, it sounds like the motor to extract the lens is still running further, and a noise, like gear running over gear is to hear.
Eventually, after a few seconds, the noise will stop and it shows E:61:40 on the LCD screen. Any suggestions what to do?
A reply, may be a solution?? is greatly appreciated.
-Thank you-

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Sounds like a fault you should be able to return the item back ask for a repair or refund or replacement if its in 12 month warranty

Posted on Apr 02, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Camera sony cybershot full HD 1080... lens got stuck out ... and looking for a solution


Sounds like the drive gear is extremely dirty, broken or the drive motor is damaged. You could try forcing it by pulling/pushing it when power is turned on/off but I would take it to a qualified service center.

Sep 02, 2011 | Sony Cyber-shot DSC-W50 Digital Camera

2 Answers

Lens error When I try to turn the camera on, the lens automatically extends and extracts itself, as if it's trying to open and adjust, and then closes. There is a "whinning" sound too.


Ok, you have to take the camera in for service, if you have warranty try that first - contact your dealer.

here is one repair place if you don't know where to take it
http://www.advancecamera.com/repair/

you may also contact nikon directly for a qualifyed service center near you.

Jun 18, 2008 | Nikon COOLPIX S200 Digital Camera

1 Answer

The screen reads "Turn the power off and on again"


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Feb 06, 2011 | Sony Cybershot W330 Digital Camera

1 Answer

I have a sony cybershot w-290. I downloaded pictures to my laptop from the memory stick. When I turn it on I get a message to turn it off and back on again. My lens keeps going in and out. I show full...


Sounds like your lens has issues. Probably some debris/sand got into it or maybe it suffered a
Jolt of some sort. Whatever the case maybe you will need to get your Lens serviced.
Sometimes if you use a case the camera may have turned on inside the case and caused
lens damage.

Feb 02, 2011 | Sony Cybershot Dsc-w290 W230 W220

1 Answer

When turning on it says, "Access" then "Turn the Power off and on Again"? Video and camera will not work, but can see pics taken? The camera is: Sony Cybershot DSC-N2 10.1MP


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Jan 30, 2011 | Sony Cybershot DSC-T77 Digital Camera

1 Answer

My Sony Cybershot DSC-S950 10.1MP Digital Camera with 4x Optical Zoom with Steady Shot returns error message "Turn the power on and off again"! on the screen. also, the lens dont retract like...


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Nov 12, 2010 | Sony Cybershot DSC-S950 Digital Camera

1 Answer

My camera Cybershot DSC-W150 has a problem with zoom


Sounds like your lens might be stuck. Do not force it closed or pull it out for that might further damage parts that are an integral part of its sliding mechanism. http://www.teleplancamerarepair.com/Sony_Cyber-Shot_DSC-W150 can repair this for you and they also clean your camera as part of the repair.
if there were any parts you were not able to put together after you opened it , make sure to very carefully put those back to go along with your camera.

Jul 08, 2010 | Sony Cameras

1 Answer

Sony Cybershot 10.1 DSC-N2


throw it at the nearest person while yelling JAPAN FOUR!!!! this works everytime i try it

Oct 01, 2008 | Sony Cybershot S650 Digital Camera

1 Answer

Lenc cover will not open


This can be caused by several different situations. Most commonly the camera has experienced some kind of impact which knocks an element out of alignment, preventing the lens from rotating normally. Symptoms of this include: *you may hear no mechanical sound at all when the camera is turned on *you may see visibly mis-aligned components of the lens *you may hear a loud "snap snap" sound as the camera tries to move the lens when the camera is powered on The second most common cause is a particle of sand getting stuck in the focus motor drive gears. This prevents the focus element from moving normally and causes the camera to shut off to prevent damage to the lens assembly. Symptoms of this include: *A loud "buzzing" sound when the camera is turned on, followed by the beeping and shutdown. Finally the third most common cause of this problem is a broken tooth on the zoom motor drive gears. Symptoms of this include: *the sound of the running motor with a regular "click click click" sound for several seconds. This will not be a "snap snap" sound, that is a different problem. *the lens will move in and out easily by hand as if free from any resistance. All of these problems require disassembly to repair. The charge is around $125 labor at my shop.

Jun 12, 2007 | Canon PowerShot SD400 / IXUS 50 Digital...

Not finding what you are looking for?
Sony Cyber-shot DSC-S600 Digital Camera Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

james laughton
james laughton

Level 3 Expert

2189 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

25340 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...