Question about HP DeskJet F380 All-In-One Printer

4 Answers

Printing Why no printing takes place

Posted by on

  • Anonymous Feb 03, 2008

    MY computer does not print,when I press the print button blank paper comes out and I am sure my printer has ink.

×

Ad

4 Answers

I also have a similar problem: I just replaced the ink cartridges (and remembered to take the plastic off) but it won't print on my hp photo paper. It will print both color and black and white just fine on regular letter sized paper, but my 4x6 glossy paper comes out blank!

Posted on Feb 05, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 103 Answers

More information is needed here, but if you've just replaced the cartridge be sure you've removed the tape cover from the bottom of the it. That will keep ink from coming out. Been there, done that!

Posted on Feb 03, 2008

Ad

My printer has ink but,then too my printer does not work.

Posted on Feb 03, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

More information is needed to solve your problem

1.what kind of printer?
2.Do you have it hooked up to your pc and have power?
3.are you getting an error message?

thank you

Posted on Jan 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New cartridge not printing


take eject the carts
take all ink out
get a big bit of cotton wool
place an A4 sheet so the head sits on it
then stuff the cotton wool into the ink cart tray
now poar in 150ml of IPA
close the printer
place a damp towel over the printer
leave it for 12 hrs
next day take off the towel out the cotton wool
and put back the ink
now charge allign and clean the print head
it will work...

Mar 05, 2015 | Office Equipment & Supplies

1 Answer

My PhotoSmart2710 takes like 10 minutes to startup and printing test page takes more than 1 hour.


Take a real close look at the entire paper path and be sure that there isn't a small piece of torn paper stuck in some obscure place.

Aug 18, 2014 | HP Photosmart 2710 All-In-One InkJet...

1 Answer

Why my hp laserjet 1320 printer take gape of 5 second after a print


Most probably due to overheating. Or maybe it is placed jn a damp area. Or due to internal laser heating element which is responsible for drying out the printed ink. Or other reason can be your system printer settings. Try them restoring to default first.

Jan 04, 2014 | HP LaserJet 1320 Printer

1 Answer

Prints a line top and left


You may have to do a clean and wick on the cartridges. Please Follow the Below Steps:

Take 2 Paper Towels one should be Damped with Luke Warm Water and the other one should be Dry.

Take the Cartridges out of the Printer and on the bottom of the cartridges where you have the ink coming out of place the Damped Paper Towel on It and Remove it, Do the Same Procedure thrice.

Once thats done, Place the Dry Paper Towel in the same mentioned way. Try to Print.

Good Luck!!!!!!!

Feb 15, 2012 | Epson Stylus Photo R300 InkJet Printer

2 Answers

How to refill hp deskjet 1560 black cartidge


Hi

check here

Pls vote us to keep us alive
">

Nov 09, 2010 | Office Equipment & Supplies

1 Answer

This printer does not double sided print. what can I do?


Print page 1 first and then place the page 1 back in the paper tray but the page must be turned upside down to print page 2. You need to test print a page to work out how to place the page correctly to get the print the right way around.
Repeat the process for page 3&4, 5&6 etc.
This is a slow process but OK for a few pages, but if you quire a few pages to do, then I would take it to a print shop.

Sep 12, 2010 | Brother HL 2140 Laser Printer

1 Answer

Printing doesnt take place


Check in the different port. Install the drivers properly and uninstall and reinstall the drivers from the Website and also need to check the print spooler services for that type services.msc in RUN. And start the Print spooler services while choosing the Automatic option.

Nov 19, 2009 | Samsung ML-1640 Monochrome Laser Printer

1 Answer

The printer will not let us print, says we need to replace the color toner, but we no longer want to use the color toner, does the cartridges for color have to be in before we can print


In short YES. Color cartridges have to be in place and have toner to allow Black printing to take place and vice versa. This is common practice for modern printers.

Nov 13, 2009 | Brother MFC 7420 All-In-One Laser Printer

1 Answer

Started printing light / dark blue bands instead of same shade. Tried cleaning but no different. Thanks.


Do a proper head clean.

Remove the cartridges and put them aside.

Remove Print head taking care not to touch the metal parts.

Boil some water, pour one quarter inch of boiling water into saucer.

Place the part of the print head where the ink comes out in the water.

Give it a few seconds, you will see the ink coming out into the water.

Sit the print head on some paper towel with the part where the ink comes out on the towel and let the excess water be absorbed by towel..

Replace print head in printer, taking care not to touch the metal parts.

Place cartridges back in print head.

Do some test runs to check the condition of the head, you may have to do a head clean or two.....

If that doesn't work try a new blue cartridge.

Usually works on my machine.

Jul 08, 2009 | Canon PIXMA iP3000 InkJet Photo Printer

Not finding what you are looking for?
HP DeskJet F380 All-In-One Printer Logo

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Ben Johnson

Level 3 Expert

685 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...