Question about Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

HC code is on the front when it finish washing the clothes

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

This HC error code will appear at the end of the wash cycle to indicate that the hot and cold water inlet hoses are switched. If the hoses are not switched it could indicate a problem with the Electronic Control Board. You can try to rest the washer by unplugging or flipping the breaker to the washer fo 2-5 min. Restore power to the washer and try running a short cycle. This will help clear any irregularities that the control board may have encountered.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question%$#@

Posted on Sep 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does HC mean


HOT CLOTHES
HEAR are CLOTHES
HELLO CHERIE

HIGH CLAEN
HERE CARE

Oct 20, 2014 | Washing Machines

1 Answer

What does the HC code mean on the Maytag Bravos Quiet Series 300 mean?


You can fix it. Your hot and cold water hoses are reversed on the water valve on the washer. Switch them around you should be fine.

Sep 08, 2014 | Washing Machines

1 Answer

My Whirlpool Duet Sport front loader washing machine will finish washing the close but does not rinse then spin out the water. I have to turn it off turn it back on to spin and drain. I have used the...


Hello & Welcome to FixYa

Error code 5d/Sd means suds have been detected. To solve this problem you have to take the bottom front panel apart and then clean the drain filter pump assembly completely, make sure the washer is unplugged before working on it. Please get back to me if you have any other questions.

Kevin

Jun 13, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Was washing a load of clothes and once it filled up with water i am getting a dr flashing message. The door will close but it will not lock so i cant finish washing my clothes


if it still has water in it.... most likely you either have a obstruction in the clean out located front bottom of unit behind panel or the drain pump itself has failed.... the code is drain... it gets to its first rinse cycle the wont drain therefore will throw codes on you.... good luck service 18 years a/c and heating unlimited texas

Dec 31, 2010 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

I have a kenmore elite oasishe washer and it keeps setting off messages that I am not sure the meaning of. It finished washing the other day and it had hc on the machine what does this mean?


This HC error code will appear at the end of the wash cycle to indicate that the hot and cold water inlet hoses are switched.
If the hoses are not switched it could indicate a problem with the Electronic Control Board.
You can try to rest the washer by unplugging or flipping the breaker to the washer fo 2-5 min.
Restore power to the washer and try running a short cycle.
This will help clear any irregularities that the control board may have encountered.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

May 21, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

Whirlpool front load washer getting an error code of "F6"


f 06 is a in issue with the motor control board, check the wiring harness attached to the board.

May 21, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

What is the HC code for the washer . It comes on after the wash cycle is finished.


After replacing the part to fix the F1 code, the washer (Oasis he) now comes up with a HC code. Also, even though the cycle is set for warm/cold, the clothes are coming out hot at the end of the cycle...and the cold water is hooked up and on. Any suggestions?

Sep 08, 2009 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

When the washer is finished washing. what does hc mean


This HC error code will appear at the end of the wash cycle to indicate that the hot and cold water inlet hoses are switched. If the hoses are not switched it could indicate a problem with the Electronic Control Board. You can try to rest the washer by unplugging or flipping the breaker to the washer fo 2-5 min. Restore power to the washer and try running a short cycle. This will help clear any irregularities that the control board may have encountered.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jul 29, 2009 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Kenmore oasis he beeping during cycle


"HC" indicates hot and cold hoses switched.

Aug 23, 2008 | Kenmore Oasis HE 27082 Top Load Washer

Not finding what you are looking for?
Kenmore Elite Oasis 27052 Top Load Washer Logo

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2122 Answers

fordexpert

Level 3 Expert

5495 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...