Question about Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Display does not light up at all - Maytag Neptune FAV6800AW Top Load Washer

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 526 Answers

If the 120VAC wahser service outlet has power and the machine LED Control Console for the FAV6800AW or LCD screen for the FAV9800AW appeares to have no power then I feel you have a Control Board failure. If you post your model number we can give you and aproxmate cost of the Control Board. The Control Board is under warranty for 5 yr. If you call Maytag customer service at 1-800-688-9900 they will need your Model Number and Serial number located on the rear top right of the console.

The above machine types do not have an internal fuse or circuit breaker to check.

Posted on Nov 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to keep the radio light on?


The sensor behind the plastic readout window needs to be exposed to a sufficient amount of light to alter the display brightness from dark room mode to bright room mode (dimmed display, bright display). Be sure sufficient light falls on the digital readout display when desiring the display to be at its bright mode setting.

Apr 26, 2014 | Bose Wave Radio Am/fm Awr1-1w Remote...

1 Answer

Backlight burned out, how do I replace it?


The back light is typically an integral part of the LCD display, so you may have to replace the entire display. On some displays, the touchscreen and back light connections are separate from the display and on some displays, these connections are soldered to the LCD display. Trying to take apart the LCD display just to change the back light can result in breaking the LCD display. You are better off just replacing the entire display if you can find it for that model.

Oct 15, 2013 | Garmin GPSMAP 176C GPS Receiver

2 Answers

Nokia 1209 display lights not coming


Hi, when a phones display light does not come on,there is an IC that makes the display light comes on. When the IC that makes the display light is bad, it will not make the light come on.

When you replace the IC, the display light will come on again.

Take care.

Sep 26, 2010 | Nokia 1209 Cell Phone

1 Answer

Display light does not turn off in sigmatel t33i. When the phone is switched on, the display light turn's off, as the time setted in the settings. But after a incoming call or entering in multimedia, the...


Display light does not turn off in sigmatel t33i. When the phone is switched on, the display light turn's off, as the time setted in the settings. But after a incoming call or entering in multimedia, the display light does not turn off in the sigmatel fxd t33i..

May 04, 2010 | Cell Phones

4 Answers

Display prblem


setting me jaake display light ON kariye. if it does not work then its a hardware fault. take it to nokia care.

Jul 28, 2009 | Nokia 1209 Cell Phone

5 Answers

My nokia 6085 mini display wont light . You can see the time displayed but it is dark.


change the display IC near the main board strip connector, there r two ICs the one on the right side is for mini display , re heat it if it doesn't work after changing the IC ;)

Jun 06, 2009 | Nokia 6085 Cellular Phone

2 Answers

The display light doesn't come on to indicate what the unit is doing (frequency, mode, etc.)


I assume that it plays, you just can't see the display. It may just need a new display bulb, that back lights the display.

Feb 22, 2009 | Yamaha RX-V730 Receiver

Not finding what you are looking for?
Maytag Neptune FAV6800AW Top Load Washer Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...